Sennheiser HMD 26-II-600-8
Hypercardioid Broadcast Headset with Unterminated Ends

OUR PART #  HMD26-II-600-8


Sennheiser's HMD 26-II-600-8 is a broadcast headset with 600 Ohm impedance, ActiveGard™, a dynamic microphone, and with copper cable Kevlar® reinforced with short coiled part for minimum structure born noise, as well as unterminated ends.

The HMD 26-II applies to requirements of demanding broadcast applications for studio or outside productions.  The headset is lightweight, provides extra soft ear cushions and headband paddings for outstanding wearing comfort even during long production days.
 The closed, supra-aural headphones are dimensioned for high maximum SPL and provide a good passive noise attenuation.  They are equipped with the ActiveGard™ limiter which protects hearing from sudden volume peaks above 105 dB.  It can be activated or deactivated.

Headset is provided with a dynamic hyper-cardiod patterned microphone.  The microphone features excellent acoustic performance, a reliable noise suppression and has a shock mounted capsule for absorbing structure-borne noise.  The short flexible part of the boom guarantees right positioning of microphone.  Headset is designed for use in loud environment.

Following the modular concept cables, ear cushions and paddings can be replaced easily.

Includes:

  • 1x broadcast headset
  • 1x cable clip
  • 1x large headband padding
  • 1x wind and pop screen
  • 1x manual

Features:

  • Lightweight with extra-soft cushions for excellent wearing comfort
  • Accurate and linear sound reproduction for professional Radio and TV applications
  • Microphone provides audio transmission in broadcast quality
  • ActiveGard™ (on/off switch) for protected hearing
  • Reliable performance over long lifetime for safe investments
  • Swiveling ear cap for single sided listening
  • Microphone can be worn either on right or left hand side
  • Modular concept of different cables and cushions for highest flexibility

Specifications:

  • Impedance:
    • Headphones: 600 Ohms
    • Microphone: 300 Ohms
  • Characteristic SPL:
    • 1 kHz, 1V: 107 dB
    • 1 kHz, 1 mW: 105 dB  
  • Max. Sound pressure level (active): ActiveGard™ switched off: 127 dB at 1 kHz, 200 mW
  • Weight without cable: approx. 200 g
  • Frequency response (Microphone): 40 Hz to 16 kHz (microphone)  
  • Transducer principle (Microphone): dynamic, noise-compensating, hyper-cardioid  
  • Frequency response (Headphones): 40 Hz to 16 kHz  
  • Microphone: BMD 424  
  • THD, total harmonic distortion: < 0.5 %  
  • Contact pressure: 3.9 N  
  • Ear coupling: supra-aural  
  • Storage temperature: - 55°C to 70 °C  
  • Operating temperature: - 15° C to 55 °C  
  • Output voltage: 0.4 mV / Pa at 1 kHz  
  • Color: black
  • Transducer principle (Headphones): dynamic, closed  

Sennheiser HMD 26-II-600-8
Hypercardioid Broadcast Headset with Unterminated Ends

OUR PART #  HMD26-II-600-8

Product Information:

Sennheiser's HMD 26-II-600-8 is a broadcast headset with 600 Ohm impedance, ActiveGard™, a dynamic microphone, and with copper cable Kevlar® reinforced with short coiled part for minimum structure born noise, as well as unterminated ends.

The HMD 26-II applies to requirements of demanding broadcast applications for studio or outside productions.  The headset is lightweight, provides extra soft ear cushions and headband paddings for outstanding wearing comfort even during long production days.
 The closed, supra-aural headphones are dimensioned for high maximum SPL and provide a good passive noise attenuation.  They are equipped with the ActiveGard™ limiter which protects hearing from sudden volume peaks above 105 dB.  It can be activated or deactivated.

Headset is provided with a dynamic hyper-cardiod patterned microphone.  The microphone features excellent acoustic performance, a reliable noise suppression and has a shock mounted capsule for absorbing structure-borne noise.  The short flexible part of the boom guarantees right positioning of microphone.  Headset is designed for use in loud environment.

Following the modular concept cables, ear cushions and paddings can be replaced easily.

Includes:

  • 1x broadcast headset
  • 1x cable clip
  • 1x large headband padding
  • 1x wind and pop screen
  • 1x manual

Features:

  • Lightweight with extra-soft cushions for excellent wearing comfort
  • Accurate and linear sound reproduction for professional Radio and TV applications
  • Microphone provides audio transmission in broadcast quality
  • ActiveGard™ (on/off switch) for protected hearing
  • Reliable performance over long lifetime for safe investments
  • Swiveling ear cap for single sided listening
  • Microphone can be worn either on right or left hand side
  • Modular concept of different cables and cushions for highest flexibility

Specifications:

  • Impedance:
    • Headphones: 600 Ohms
    • Microphone: 300 Ohms
  • Characteristic SPL:
    • 1 kHz, 1V: 107 dB
    • 1 kHz, 1 mW: 105 dB  
  • Max. Sound pressure level (active): ActiveGard™ switched off: 127 dB at 1 kHz, 200 mW
  • Weight without cable: approx. 200 g
  • Frequency response (Microphone): 40 Hz to 16 kHz (microphone)  
  • Transducer principle (Microphone): dynamic, noise-compensating, hyper-cardioid  
  • Frequency response (Headphones): 40 Hz to 16 kHz  
  • Microphone: BMD 424  
  • THD, total harmonic distortion: < 0.5 %  
  • Contact pressure: 3.9 N  
  • Ear coupling: supra-aural  
  • Storage temperature: - 55°C to 70 °C  
  • Operating temperature: - 15° C to 55 °C  
  • Output voltage: 0.4 mV / Pa at 1 kHz  
  • Color: black
  • Transducer principle (Headphones): dynamic, closed  
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM