Community CP6-W
6.5" 2-Way Full-Range 60 Watt Pendant Loudspeaker in White

OUR PART #  CP6-W

Log In for price!

Don't have an account? Apply today!

The Community CP6-W Commercial Design series white pendant speaker provides high quality paging and musical performance. It is designed for open architecture spaces or any location where a stylish pendant form factor is desired. Uniform voicing throughout the Commercial Design Series means that the CP6-W can be combined with other members of the Commercial Design Series without compromising consistency from zone to zone. Community’s proprietary Tru-Phase™ waveguide produces a consistently wide conical polar response up to 16 kHz. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry leading sensitivity, thereby permitting up to 3 dB greater output level while requiring up to half the amplification power of competing products. An easy-access selector switch is conveniently located on the face of the loudspeaker for selectable 8 Ohm or 70V/100V operation, while an integrated rear cover hides all wiring and hanging hardware for an aesthetically pleasing installation.

NOTE:  Image shown above is for illustrative puposes only; only one speaker in White is included per purchase. For more information on this and other products, contact your Sales Representative. 

Community CP6-W Features:

  • Stylish, contoured contemporary pendant design
  • High intelligibility with exceptional uniform coverage
  • Same components and voicing as the Commercial Design ceiling and surface mount loudspeaker family
  • Consistent, wide dispersion up to 16 kHz
  • True coaxial loudspeakers with HF compression drivers
  • Tru-Phase™ high-frequency waveguide
  • Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
  • External loop-through Euroblock connectors
  • Integrated rear cover hiding all wires and hanging hardware
  • Face-mounted adjustable tap position selector switch
  • Selectable 8 ohm or 70V/100V operation
  • ETL listed to comply with UL1480

Community CP6-W Specifications:

  • Loudspeaker Type:  Two-way, full-range, coaxial pendant mount loudspeaker, 8 Ohm or 70V/100V operation
  • Operating Range:  70 Hz - 13.5 kHz (-10 dB)
  • Frequency Response:  100 Hz - 12.5 kHz (-3 dB)
  • Max Input Ratings (8 Ohm):  60W continuous, 150W program, 21.9 volts RMS, 43.8 volts momentary peak
  • Transformer Taps:
    • 70V:  30W, 15W, 7.5W, 3.75W and 8 Ohm selectable
    • 100V:  30W, 15W, 7.5W, and 8 Ohm selectable
  • Distortion:
    • 500 Hz, 10% Full Power:  0.33% 2nd Harmonic, 0.55% 3rd Harmonic
    • 500 Hz, 1% Full Power:  0.25% 2nd Harmonic, 0.06% 3rd Harmonic
    • 2 kHz, 10% Full Power:  1.11% 2nd Harmonic, 0.80% 3rd Harmonic
    • 2 kHz, 1% Full Power:  0.67% 2nd Harmonic, 0.23% 3rd Harmonic
    • 8 kHz, 10% Full Power:  2.49% 2nd Harmonic, 0.21% 3rd Harmonic
    • 8 kHz, 1% Full Power:  0.30% 2nd Harmonic, 0.06% 3rd Harmonic
  • Sensitivity (1W/1m):  91 dB SPL (100 Hz to 12.5 kHz 1/3 octave bands); 91 dB SPL (250 Hz to 4 kHz speech range)
  • Maximum Output:
    • 8 Ohms:  109 dB SPL / 115 dB SPL (peak)
    • 70V:  106 dB SPL / 112 dB SPL (peak)
    • 100V:  106 dB SPL / 112 dB SPL (peak)
  • Nominal Impedance:  8 Ohms
  • Minimum Impedance:  7 Ohms @ 10 kHz
  • Nominal Coverage:  120º conical (1 kHz to 6 kHz +/- 65°); 120° conical (500 Hz to 6 kHz +/- 65°)
  • Axial Q / DI:  5.04 / 7.03, 500 Hz to 6 kHz
  • Crossover Frequency:  2 kHz
  • Recommended Signal Processing:  90 Hz, at 24dB/Oct high pass filter
  • Drivers:  LF 1x 6.5" cone, HF 1x 3/4" exit compression driver
  • Driver Protection:  Self-resetting solid state circuit breaker
  • Input Connection:  Two 2-pole Euroblock connectors
  • Controls:  Front-face wattage / low impedance selector switch
  • Enclosure:  UL 94V-0 rated ABS plastic, matte finish, paintable
  • Finish:  White
  • Mounting/Rigging Provisions:  Two PHK-15 pendant hang kits (one for main suspension and one as a safety cable), each including15ft (4.5m) long 2mm (0.77") high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the loudspeaker bracket and Gripple® brand adjustable height cable fasteners.
  • Grille:  Powder coated steel with safetyline, white finish, paintable
  • Baffle:  Reflex loaded UL 94V-0 rated ABS
  • Safety Features:  Included safety cable. Eachcable has an SWL of 99 lbs (45 kg).
  • Safety Agency Ratings:  ETL listed to complywith UL1480 and CSA60065. Suspension system and Gripple® brand cable fastener listed per UL1598 and UL2239, TUV and CSA Class 3426-01 and Class 3426-81.
  • Required Accessories:  Electronic high passfilter
  • Supplied Accessories:  Two PHK-15 pendant hang kits, Enclosure ABS plastic rear cover, Rear cover ingress weather plug
  • Optional Accessories:
    • PHK-30 30ft (9.1m) pendant hang kit
    • PHK-50 50ft (15.2m) pendant hang kit
    • PSC replacement Gripple™ speed clamp
    • PST-14 trimmable 14ft (4.3m) decorative split loom tubing
  • Dimensions:
    • Height:  13.629" (346.2 mm) enclosure
    • Diameter:  10.0" (254 mm) face
  • Weight:  8.1 lbs (3.7 kg)
50 ft Pendant Hanging Kit for Distributed Design DP6 and DP8 Pendant Speakers
Community PHK-50 50 ft Pendant Hanging Kit for Distributed Design DP6 and DP8 Pendant Speakers
The Community PHK-50 is an optional kit of two (2) 50 ft long 2mm (15.2m long 0.77") high-tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the DP6/DP8 pendant loudspeaker bracket ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
30 ft Pendant Hanging Kit for Distributed Design DP6 and DP8 Pendant Speakers
Community PHK-30 30 ft Pendant Hanging Kit for Distributed Design DP6 and DP8 Pendant Speakers
The Community PHK-30 is an optional kit of two (2) 30 ft long 2mm (9.1m long 0.77") high-tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the DP6/DP8 pendant loudspeaker bracket ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
14 ft Pendant Split Loom Tubing
Community PST-14 14 ft Pendant Split Loom Tubing
The Community PST-14 is a trimmable 14ft (4.3m) decorative split loom tubing architectural cover for hanging cables, black finish.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Community CP6-W
6.5" 2-Way Full-Range 60 Watt Pendant Loudspeaker in White

OUR PART #  CP6-W

Product Information:

The Community CP6-W Commercial Design series white pendant speaker provides high quality paging and musical performance. It is designed for open architecture spaces or any location where a stylish pendant form factor is desired. Uniform voicing throughout the Commercial Design Series means that the CP6-W can be combined with other members of the Commercial Design Series without compromising consistency from zone to zone. Community’s proprietary Tru-Phase™ waveguide produces a consistently wide conical polar response up to 16 kHz. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry leading sensitivity, thereby permitting up to 3 dB greater output level while requiring up to half the amplification power of competing products. An easy-access selector switch is conveniently located on the face of the loudspeaker for selectable 8 Ohm or 70V/100V operation, while an integrated rear cover hides all wiring and hanging hardware for an aesthetically pleasing installation.

NOTE:  Image shown above is for illustrative puposes only; only one speaker in White is included per purchase. For more information on this and other products, contact your Sales Representative. 

Community CP6-W Features:

  • Stylish, contoured contemporary pendant design
  • High intelligibility with exceptional uniform coverage
  • Same components and voicing as the Commercial Design ceiling and surface mount loudspeaker family
  • Consistent, wide dispersion up to 16 kHz
  • True coaxial loudspeakers with HF compression drivers
  • Tru-Phase™ high-frequency waveguide
  • Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
  • External loop-through Euroblock connectors
  • Integrated rear cover hiding all wires and hanging hardware
  • Face-mounted adjustable tap position selector switch
  • Selectable 8 ohm or 70V/100V operation
  • ETL listed to comply with UL1480

Community CP6-W Specifications:

  • Loudspeaker Type:  Two-way, full-range, coaxial pendant mount loudspeaker, 8 Ohm or 70V/100V operation
  • Operating Range:  70 Hz - 13.5 kHz (-10 dB)
  • Frequency Response:  100 Hz - 12.5 kHz (-3 dB)
  • Max Input Ratings (8 Ohm):  60W continuous, 150W program, 21.9 volts RMS, 43.8 volts momentary peak
  • Transformer Taps:
    • 70V:  30W, 15W, 7.5W, 3.75W and 8 Ohm selectable
    • 100V:  30W, 15W, 7.5W, and 8 Ohm selectable
  • Distortion:
    • 500 Hz, 10% Full Power:  0.33% 2nd Harmonic, 0.55% 3rd Harmonic
    • 500 Hz, 1% Full Power:  0.25% 2nd Harmonic, 0.06% 3rd Harmonic
    • 2 kHz, 10% Full Power:  1.11% 2nd Harmonic, 0.80% 3rd Harmonic
    • 2 kHz, 1% Full Power:  0.67% 2nd Harmonic, 0.23% 3rd Harmonic
    • 8 kHz, 10% Full Power:  2.49% 2nd Harmonic, 0.21% 3rd Harmonic
    • 8 kHz, 1% Full Power:  0.30% 2nd Harmonic, 0.06% 3rd Harmonic
  • Sensitivity (1W/1m):  91 dB SPL (100 Hz to 12.5 kHz 1/3 octave bands); 91 dB SPL (250 Hz to 4 kHz speech range)
  • Maximum Output:
    • 8 Ohms:  109 dB SPL / 115 dB SPL (peak)
    • 70V:  106 dB SPL / 112 dB SPL (peak)
    • 100V:  106 dB SPL / 112 dB SPL (peak)
  • Nominal Impedance:  8 Ohms
  • Minimum Impedance:  7 Ohms @ 10 kHz
  • Nominal Coverage:  120º conical (1 kHz to 6 kHz +/- 65°); 120° conical (500 Hz to 6 kHz +/- 65°)
  • Axial Q / DI:  5.04 / 7.03, 500 Hz to 6 kHz
  • Crossover Frequency:  2 kHz
  • Recommended Signal Processing:  90 Hz, at 24dB/Oct high pass filter
  • Drivers:  LF 1x 6.5" cone, HF 1x 3/4" exit compression driver
  • Driver Protection:  Self-resetting solid state circuit breaker
  • Input Connection:  Two 2-pole Euroblock connectors
  • Controls:  Front-face wattage / low impedance selector switch
  • Enclosure:  UL 94V-0 rated ABS plastic, matte finish, paintable
  • Finish:  White
  • Mounting/Rigging Provisions:  Two PHK-15 pendant hang kits (one for main suspension and one as a safety cable), each including15ft (4.5m) long 2mm (0.77") high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the loudspeaker bracket and Gripple® brand adjustable height cable fasteners.
  • Grille:  Powder coated steel with safetyline, white finish, paintable
  • Baffle:  Reflex loaded UL 94V-0 rated ABS
  • Safety Features:  Included safety cable. Eachcable has an SWL of 99 lbs (45 kg).
  • Safety Agency Ratings:  ETL listed to complywith UL1480 and CSA60065. Suspension system and Gripple® brand cable fastener listed per UL1598 and UL2239, TUV and CSA Class 3426-01 and Class 3426-81.
  • Required Accessories:  Electronic high passfilter
  • Supplied Accessories:  Two PHK-15 pendant hang kits, Enclosure ABS plastic rear cover, Rear cover ingress weather plug
  • Optional Accessories:
    • PHK-30 30ft (9.1m) pendant hang kit
    • PHK-50 50ft (15.2m) pendant hang kit
    • PSC replacement Gripple™ speed clamp
    • PST-14 trimmable 14ft (4.3m) decorative split loom tubing
  • Dimensions:
    • Height:  13.629" (346.2 mm) enclosure
    • Diameter:  10.0" (254 mm) face
  • Weight:  8.1 lbs (3.7 kg)
50 ft Pendant Hanging Kit for Distributed Design DP6 and DP8 Pendant Speakers
Community PHK-50 50 ft Pendant Hanging Kit for Distributed Design DP6 and DP8 Pendant Speakers
The Community PHK-50 is an optional kit of two (2) 50 ft long 2mm (15.2m long 0.77") high-tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the DP6/DP8 pendant loudspeaker bracket ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
30 ft Pendant Hanging Kit for Distributed Design DP6 and DP8 Pendant Speakers
Community PHK-30 30 ft Pendant Hanging Kit for Distributed Design DP6 and DP8 Pendant Speakers
The Community PHK-30 is an optional kit of two (2) 30 ft long 2mm (9.1m long 0.77") high-tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the DP6/DP8 pendant loudspeaker bracket ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
14 ft Pendant Split Loom Tubing
Community PST-14 14 ft Pendant Split Loom Tubing
The Community PST-14 is a trimmable 14ft (4.3m) decorative split loom tubing architectural cover for hanging cables, black finish.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM