Ashly ne24.24M-8X8
Networkable Matrix Processor

OUR PART #  NE24.24M-8X8


Connecting and controlling an audio processor for networked systems has now been simplified with Ashly’s NE-Series Protea ne24.24M digital signal processor. This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.

The ne24.24M Matrix Processor uses modular expansion cards to provide up to twenty-four channels of audio matrixing and processing. The base unit offers a four-input/four-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the base unit’s total inputs or outputs four channels at a time. These cards are easily installed in the field without the need to reprogram the device.

Matrixing allows you to route any input to any output and control individual levels once they have been assigned. Fixed path architecture and extensive processing power per channel will reduce the amount of time it takes to set up your system. All programming is accomplished using Ashly’s Protea NE Software on a PC platform. No front panel controls and multi-level software security assures you a tamperproof audio system. Input channel processing blocks include Mic Preamp with Phantom Power, Gain, Delay, fifteen EQ Filters, Gate, Autoleveler and Ducker. Inputs may be configured as either mic or line level. Output channel processing blocks consist of a Cross Point Mixer, HPF/LPF, Delay, fifteen EQ Filters, Gain and Limiter. The cross point mixer in the output section allows you to route any input to any output at any level and mute any input at any output without affecting the true input configuration. The HPF/LPF block offers Bessel, Butterworth and Linkwitz-Riley filters with 12, 18, 24 and 48dB/octave slopes.

Whether you are designing or installing a system for corporate boardrooms, restaurants, courtrooms, houses of worship, left/center/right theatres, auditoriums or conference centers, the Protea ne24.24M will more than satisfy your requirements for any zoned system requiring input/output matrixing with signal processing.

Ashly ne24.24M Features:

  • 10/100 Ethernet and RS-232 computer interface is standard
  • Extensive DSP Available
  • Easy and intuitive user interface
  • Mic/Line inputs
  • 24-bit A/D–D/A audio resolution
  • 24-bit/150 MHz DSPs
  • Up to 24 channels of audio processing
  • 4x4 base unit configuration
  • Expand inputs or outputs 4 channels per module
  • Modules easily field installable
  •  Euroblock connectors for audio, preset recall, DC remote level control and data in/out
  • 31 preset locations
  • Four dedicated remote controls for Level, Preset Recall and Programmable Functions
  • Third Party Control Friendly
  • Input and output metering viewable in dBu
  • Multi-level Security
  • Five year worry-free warranty
  • Safety/Compliance: (FCC, CE, RoHS)
  • Rear panel:
    • 10/100 Ethernet port
    • RS-232 Port
    • Euroblock inputs
    • Euroblock outputs
    • Remote level control
    • Preset Recall
    • Data in and out ports

Ashly ne24.24M Specifications:

  • Input: Active Balanced, 18 kohms
  • Max Input Level: +20dBu Input Gain Range -50dB to +12dB, selectable polarity
  • Output: Active Servo Balanced, 112 ohms
  • Max Output Level: +20dBu
  • Output Gain Range: -50dB to +12dB, selectable polarity
  • Frequency Response: 20 Hz-20kHz, ±0.25 dB
  • THD: <0.01% @1 kHz, +20 dBu
  • Dynamic Range: >110 dB (20 Hz-20 kHz) unweighted
  • Output Noise: <-90 dBu unweighted
  • Power Requirements: 90 - 240VAC, 40W
  • Shipping Weight: 13lbs (Maximum)
  • Dimensions: 19.0”L x 3.5”H x 8.5”D
  • Connections: Euroblock
  • Environmental: 40-120 deg. F, (4-49 deg, C) non-condensing
  • Mic Preamp Gain: 0dB, +20dB, +40dB, +60dB
  • Mic Preamp: Phantom Power +48VDC (9.6ma/input)
  • Mic Preamp EIN: -128dBu, 20-20KHz, 50 ohm source
  • Parametric EQ Bandwidth: 1/64th Octave to 4 Octave
  • Parametric EQ Range: +15/-30dB, 0.1 dB incr
  • Parametric EQ Resolution: 1Hz
  • Low-Shelf EQ Slope: 6 or 12dB/Octave
  • Low-Shelf EQ Frequency Range: 20Hz to 2KHz
  • Low-Shelf EQ Range: +/-15dB, 0.1dB incr
  • High-Shelf EQ Slope: 6 or 12dB/Octave
  • High-Shelf EQ Frequency Range: 3.886KHz to 20KHz
  • High-Shelf EQ Range: +/-15 dB, 0.1 dB incr
  • All Pass Filter Type: Second-Order (-180 degrees)
  • All Pass Filter Frequency Range: 20Hz to 20KHz
  • Crossover High Pass Filter Type: Linkwitz-Riley, Bessel, Butterworth
  • Crossover High Pass Filter Slope: 12, 18, 24 and 48dB/Octave
  • Crossover High Pass Filter Range: Off to 20KHz, 1Hz incr
  • Crossover Low Pass Filter Type: Linkwitz-Riley, Bessel, Butterworth
  • Crossover Low Pass Filter Range: Linkwitz-Riley, Bessel, Butterworth
  • Crossover Low Pass Filter Slope: 12, 18, 24 and 48dB/Octave
  • Maximum Input Delay: 682.5ms, 20uS incr
  • Maximum Output Delay: 682.5ms, 20uS incr
  • Gate Threshold: -80 to +20dBu, 1dBu incr
  • Gate Floor: Off, -80 to 0dBu, 1dBu incr
  • Gate Attack: .2, .5, 1, 2, 5, 10, 20, 50ms/dB
  • Gate Release: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
  • Autoleveler Target Level: -40 to +20dBu, 1dBu incr
  • Autoleveler Ratio: 1.2:1, 1.5:1, 2:1, 3:1, 4:1, 6:1, 10:1
  • Autoleveler Hold Time: 0, 1, 2, 3, 4, 5, 6 Sec
  • Autoleveler Threshold Below Target: -30 to 0dB, 1dB incr
  • Autoleveler Gain Increase Rate: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
  • Autoleveler Gain Decrease Rate: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
  • Ducker Trigger Threshold: -80 to +20dBu, 1dBu incr
  • Ducker Depth: -30 to 0dBu, 1dBu incr
  • Ducker Release: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
  • Compressor/Limiter Threshold: -20dBu to +20dBu, 1dB incr
  • Compressor/Limiter Ratio: 1.2, 1.5, 2., 3, 4, 6, 10, 20,:1
  • Compressor/Limiter Atack: 0.5ms to 50ms per dB
  • Compressor/Limiter Release: 10ms to 1sec. per dB
  • Cross Point Mixer: Gain -50 to +12dB, 1dB incr with Mute
  • Sample Rate: 48kHz
  • Input A/D | Output D/A: 24 bit
  • DSP: 24-bit Freescale
  • Propagation Delay: 1.46ms
Remote, 6-button Network
Ashly NEWR-5 Remote, 6-button Network
The neWR-5 is a programmable Ethernet based remote control unit for Ashly NE Series and Pêma products. Connecting and powering the neWR-5 is done using standard Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch or ...
Programmable Zone Controller, Wall Mount, Six Button
Ashly WR-5 Programmable Zone Controller, Wall Mount, Six Button
The WR-5 is a microprocessor-based remote control unit for use with NE Series Amplifiers and processors and the Protea 24.24M. The WR-5 is designed to fit into a standard electrical wall box for remote control of assignable functions. ...
4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
Ashly WR-2 4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
The WR-2 allows selection of one of four presets via interlocking pushbutton switches. Each pushbutton switch connects to a screw-terminal on the rear of the 24.24M (labeled "1" through "8" "Preset Recall"). The terminal numbers correspond ...
Network Fader Remote Control, 16 Channel
Ashly FR-16 Network Fader Remote Control, 16 Channel
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
8 channel Network Fader Remote Control
Ashly FR-8 8 channel Network Fader Remote Control
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Expansion Module, 4 Input
Ashly 24.24M-INPUT Expansion Module, 4 Input
Each card has four channels and provides all the DSP necessary for those four channels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Expansion Module, 4 Output
Ashly 24.24M-OUTPUT Expansion Module, 4 Output
Each card has four channels and provides all the DSP necessary for those four channels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Remote
Ashly RD8C Desktop Remote
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
8-Channel Remote Level Control
Ashly RW8C 8-Channel Remote Level Control
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
2 Control Level Wallplate Remote for Ashly 24.24M
Ashly WR-1 2 Control Level Wallplate Remote for Ashly 24.24M
The WR-1 is an assignable, dual potentiometer remote volume control for the 24.24M. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock ...
Usually ships in 7-14 business days.
Need it sooner? Call us!

Ashly ne24.24M-8X8
Networkable Matrix Processor

OUR PART #  NE24.24M-8X8

Product Information:

Connecting and controlling an audio processor for networked systems has now been simplified with Ashly’s NE-Series Protea ne24.24M digital signal processor. This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.

The ne24.24M Matrix Processor uses modular expansion cards to provide up to twenty-four channels of audio matrixing and processing. The base unit offers a four-input/four-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the base unit’s total inputs or outputs four channels at a time. These cards are easily installed in the field without the need to reprogram the device.

Matrixing allows you to route any input to any output and control individual levels once they have been assigned. Fixed path architecture and extensive processing power per channel will reduce the amount of time it takes to set up your system. All programming is accomplished using Ashly’s Protea NE Software on a PC platform. No front panel controls and multi-level software security assures you a tamperproof audio system. Input channel processing blocks include Mic Preamp with Phantom Power, Gain, Delay, fifteen EQ Filters, Gate, Autoleveler and Ducker. Inputs may be configured as either mic or line level. Output channel processing blocks consist of a Cross Point Mixer, HPF/LPF, Delay, fifteen EQ Filters, Gain and Limiter. The cross point mixer in the output section allows you to route any input to any output at any level and mute any input at any output without affecting the true input configuration. The HPF/LPF block offers Bessel, Butterworth and Linkwitz-Riley filters with 12, 18, 24 and 48dB/octave slopes.

Whether you are designing or installing a system for corporate boardrooms, restaurants, courtrooms, houses of worship, left/center/right theatres, auditoriums or conference centers, the Protea ne24.24M will more than satisfy your requirements for any zoned system requiring input/output matrixing with signal processing.

Ashly ne24.24M Features:

  • 10/100 Ethernet and RS-232 computer interface is standard
  • Extensive DSP Available
  • Easy and intuitive user interface
  • Mic/Line inputs
  • 24-bit A/D–D/A audio resolution
  • 24-bit/150 MHz DSPs
  • Up to 24 channels of audio processing
  • 4x4 base unit configuration
  • Expand inputs or outputs 4 channels per module
  • Modules easily field installable
  •  Euroblock connectors for audio, preset recall, DC remote level control and data in/out
  • 31 preset locations
  • Four dedicated remote controls for Level, Preset Recall and Programmable Functions
  • Third Party Control Friendly
  • Input and output metering viewable in dBu
  • Multi-level Security
  • Five year worry-free warranty
  • Safety/Compliance: (FCC, CE, RoHS)
  • Rear panel:
    • 10/100 Ethernet port
    • RS-232 Port
    • Euroblock inputs
    • Euroblock outputs
    • Remote level control
    • Preset Recall
    • Data in and out ports

Ashly ne24.24M Specifications:

  • Input: Active Balanced, 18 kohms
  • Max Input Level: +20dBu Input Gain Range -50dB to +12dB, selectable polarity
  • Output: Active Servo Balanced, 112 ohms
  • Max Output Level: +20dBu
  • Output Gain Range: -50dB to +12dB, selectable polarity
  • Frequency Response: 20 Hz-20kHz, ±0.25 dB
  • THD: <0.01% @1 kHz, +20 dBu
  • Dynamic Range: >110 dB (20 Hz-20 kHz) unweighted
  • Output Noise: <-90 dBu unweighted
  • Power Requirements: 90 - 240VAC, 40W
  • Shipping Weight: 13lbs (Maximum)
  • Dimensions: 19.0”L x 3.5”H x 8.5”D
  • Connections: Euroblock
  • Environmental: 40-120 deg. F, (4-49 deg, C) non-condensing
  • Mic Preamp Gain: 0dB, +20dB, +40dB, +60dB
  • Mic Preamp: Phantom Power +48VDC (9.6ma/input)
  • Mic Preamp EIN: -128dBu, 20-20KHz, 50 ohm source
  • Parametric EQ Bandwidth: 1/64th Octave to 4 Octave
  • Parametric EQ Range: +15/-30dB, 0.1 dB incr
  • Parametric EQ Resolution: 1Hz
  • Low-Shelf EQ Slope: 6 or 12dB/Octave
  • Low-Shelf EQ Frequency Range: 20Hz to 2KHz
  • Low-Shelf EQ Range: +/-15dB, 0.1dB incr
  • High-Shelf EQ Slope: 6 or 12dB/Octave
  • High-Shelf EQ Frequency Range: 3.886KHz to 20KHz
  • High-Shelf EQ Range: +/-15 dB, 0.1 dB incr
  • All Pass Filter Type: Second-Order (-180 degrees)
  • All Pass Filter Frequency Range: 20Hz to 20KHz
  • Crossover High Pass Filter Type: Linkwitz-Riley, Bessel, Butterworth
  • Crossover High Pass Filter Slope: 12, 18, 24 and 48dB/Octave
  • Crossover High Pass Filter Range: Off to 20KHz, 1Hz incr
  • Crossover Low Pass Filter Type: Linkwitz-Riley, Bessel, Butterworth
  • Crossover Low Pass Filter Range: Linkwitz-Riley, Bessel, Butterworth
  • Crossover Low Pass Filter Slope: 12, 18, 24 and 48dB/Octave
  • Maximum Input Delay: 682.5ms, 20uS incr
  • Maximum Output Delay: 682.5ms, 20uS incr
  • Gate Threshold: -80 to +20dBu, 1dBu incr
  • Gate Floor: Off, -80 to 0dBu, 1dBu incr
  • Gate Attack: .2, .5, 1, 2, 5, 10, 20, 50ms/dB
  • Gate Release: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
  • Autoleveler Target Level: -40 to +20dBu, 1dBu incr
  • Autoleveler Ratio: 1.2:1, 1.5:1, 2:1, 3:1, 4:1, 6:1, 10:1
  • Autoleveler Hold Time: 0, 1, 2, 3, 4, 5, 6 Sec
  • Autoleveler Threshold Below Target: -30 to 0dB, 1dB incr
  • Autoleveler Gain Increase Rate: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
  • Autoleveler Gain Decrease Rate: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
  • Ducker Trigger Threshold: -80 to +20dBu, 1dBu incr
  • Ducker Depth: -30 to 0dBu, 1dBu incr
  • Ducker Release: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
  • Compressor/Limiter Threshold: -20dBu to +20dBu, 1dB incr
  • Compressor/Limiter Ratio: 1.2, 1.5, 2., 3, 4, 6, 10, 20,:1
  • Compressor/Limiter Atack: 0.5ms to 50ms per dB
  • Compressor/Limiter Release: 10ms to 1sec. per dB
  • Cross Point Mixer: Gain -50 to +12dB, 1dB incr with Mute
  • Sample Rate: 48kHz
  • Input A/D | Output D/A: 24 bit
  • DSP: 24-bit Freescale
  • Propagation Delay: 1.46ms
Remote, 6-button Network
Ashly NEWR-5 Remote, 6-button Network
The neWR-5 is a programmable Ethernet based remote control unit for Ashly NE Series and Pêma products. Connecting and powering the neWR-5 is done using standard Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch or ...
Programmable Zone Controller, Wall Mount, Six Button
Ashly WR-5 Programmable Zone Controller, Wall Mount, Six Button
The WR-5 is a microprocessor-based remote control unit for use with NE Series Amplifiers and processors and the Protea 24.24M. The WR-5 is designed to fit into a standard electrical wall box for remote control of assignable functions. ...
4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
Ashly WR-2 4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
The WR-2 allows selection of one of four presets via interlocking pushbutton switches. Each pushbutton switch connects to a screw-terminal on the rear of the 24.24M (labeled "1" through "8" "Preset Recall"). The terminal numbers correspond ...
Network Fader Remote Control, 16 Channel
Ashly FR-16 Network Fader Remote Control, 16 Channel
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
8 channel Network Fader Remote Control
Ashly FR-8 8 channel Network Fader Remote Control
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Expansion Module, 4 Input
Ashly 24.24M-INPUT Expansion Module, 4 Input
Each card has four channels and provides all the DSP necessary for those four channels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Expansion Module, 4 Output
Ashly 24.24M-OUTPUT Expansion Module, 4 Output
Each card has four channels and provides all the DSP necessary for those four channels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Remote
Ashly RD8C Desktop Remote
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
8-Channel Remote Level Control
Ashly RW8C 8-Channel Remote Level Control
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
2 Control Level Wallplate Remote for Ashly 24.24M
Ashly WR-1 2 Control Level Wallplate Remote for Ashly 24.24M
The WR-1 is an assignable, dual potentiometer remote volume control for the 24.24M. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.