MyMix POWER25
Netgear FS752TP 25-Port Power-Over-Ethernet Switch

OUR PART #  POWER25


Netgear FS752TP, preconfigured for myMix systems. Can power up to 25 myMix and connect additional 23 IEX16, myMix, myMix PLUG network interface. 4 GB uplink ports to connect with other myMix switches. Internal power supply and fan.

Important information about myMix and off-the-shelf Ethernet switches:

  • Three or more myMix require an Ethernet switch (two myMix can be connnected directly to each other).
  • A myMix system with 16 or less channels, powered by the included power supplies, can use a standard 100Mbs unmanaged Ethernet switch.
  • POE (power over Ethernet) switches may be used to power each myMix. POE switches must be able to provide 15.4 watts of power on each port at the same time. Be cautious of marketing language that states "up to X watts per port". In many cases this is misleading and generally means that only a few of the ports will pass that amount of power at the same time. The best way to tell if a POE switch will power all of your myMix is to find the overall POE budget of the switch and divide that by 15.4. This will give you the number of myMix that can be powered by the switch.
  • A myMix system with more than 16 channels requires a managed switch. In many cases, POE switches that have enough wattage (POE budget) to adequately power several myMix are also managed. Managed switches should be configured with the following general settings (different manufacturers use different nomenclature, so if you are unsure contact the switch manufacturer directly):
    - Create a VLAN 2
    - Under Port Settings, set all ports within VLAN 2 to General
    - Under VLAN to Ports, set all ports within VLAN 2 to Tagged
    - IGMP Snooping status must be enabled for all VLAN
    - IGMP Querier status must be enabled for all VLAN
    - Bridge Multicast Filtering must be enabled for all VLAN
    - Unregistered Multi-cast must be set for Filtering on all ports
    - If you are connecting multiple switches you must assign a unique IP address to each switch

Click to download

MyMix POWER25
Netgear FS752TP 25-Port Power-Over-Ethernet Switch

OUR PART #  POWER25

Product Information:

Netgear FS752TP, preconfigured for myMix systems. Can power up to 25 myMix and connect additional 23 IEX16, myMix, myMix PLUG network interface. 4 GB uplink ports to connect with other myMix switches. Internal power supply and fan.

Important information about myMix and off-the-shelf Ethernet switches:

  • Three or more myMix require an Ethernet switch (two myMix can be connnected directly to each other).
  • A myMix system with 16 or less channels, powered by the included power supplies, can use a standard 100Mbs unmanaged Ethernet switch.
  • POE (power over Ethernet) switches may be used to power each myMix. POE switches must be able to provide 15.4 watts of power on each port at the same time. Be cautious of marketing language that states "up to X watts per port". In many cases this is misleading and generally means that only a few of the ports will pass that amount of power at the same time. The best way to tell if a POE switch will power all of your myMix is to find the overall POE budget of the switch and divide that by 15.4. This will give you the number of myMix that can be powered by the switch.
  • A myMix system with more than 16 channels requires a managed switch. In many cases, POE switches that have enough wattage (POE budget) to adequately power several myMix are also managed. Managed switches should be configured with the following general settings (different manufacturers use different nomenclature, so if you are unsure contact the switch manufacturer directly):
    - Create a VLAN 2
    - Under Port Settings, set all ports within VLAN 2 to General
    - Under VLAN to Ports, set all ports within VLAN 2 to Tagged
    - IGMP Snooping status must be enabled for all VLAN
    - IGMP Querier status must be enabled for all VLAN
    - Bridge Multicast Filtering must be enabled for all VLAN
    - Unregistered Multi-cast must be set for Filtering on all ports
    - If you are connecting multiple switches you must assign a unique IP address to each switch

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM