Allen & Heath ME-U
10-Port PoE Monitor Hub

OUR PART #  ME-U


The Allen & Heath ME-U is a touring-grade 10-port PoE hub providing power and audio to connect multiple ME-1 personal mixers. It comes with a standard input card to interface with GLD dSnake, iLive ACE or Aviom® A-Net®, which can be replaced with a MADI, Dante or EtherSound card to take a digital feed of up to 40 sources from third party systems.

Allen & Heath ME-U Features:

  • 10 ports with locking Ethercon connectors
  • Daisy chain for more outputs - up to 19 ME-1s with 2 hubs
  • Each port provides power + 40 audio sources to connected ME-1s
  • Touring grade build quality
  • 2U rack or desk mounting
  • Multi-purpose Networkport:
    • Connect PC or Mac for ‘web page’ setup of unit name and IP address, and manual entry of channel names
    • Connect iLive AH-Net network to pick up channel names automatically from an iLive system.

Allen & Heath ME-U Specifications:

  • Inputs: 40 inputs (Cat5), Stereo Aux, Ambient Mic
  • Outputs: 2x Stereo (Line or Headphones), Mono Line Out
  • Input Control: Level, Mute, Pan, Solo, Trim All
  • Master Control: Level, Mute, 3-band EQ, Limiter
  • Group Control: Level, Mute, Level/Pan for sources within Group
  • Groups: 16, Up to 40 sources assignable
  • Presets: 16, Store input Levels, Mutes, Pans, Key assign, Names, Group sources
  • Config: Stores Setup and all Presets
  • Names: Channels, Keys, Unit, Presets, Config
  • USB Data Port: Individual Presets or Config transfer, Firmware update
  • Cat5 Audio and PoE: Link In and Link Out, locking EtherCon connectors
  • Stereo Out:
    • Stereo 1/4" and 3.5mm Jacks
    • Headphones 300mW+300mW into 100 Ohm load
    • Max +21dBu
  • Mono Output:
    • Balanced TRS Jack
    • Nominal 0dBu, Max +18dBu
  • Aux Input:
    • Stereo 3.5mm Jack
    • Nominal -8dBu, Max +10dBu
    • Input Impedance >10kOhm
  • AD/DA Conversion: 24-bit Delta/Sigma, 48kHz
  • Residual Output Noise: -95dBu (Level down, 20-20kHz)
  • Frequency response: +0/-1dB 10Hz to 20kHz
  • Mains Power Unit (supplied): 100-240V AC, 50/60Hz in, 12V DC 1.25A out
  • Power over Cat5 cable (PoE): 10W (Requires 13W from PoE hub)
  • Dimensions (WxDxH): 8.9" x 5.9" x 2.2" (225 x 150 x 55mm)
  • Weight (including phones hook): 2 lbs (900g)
64x64 Channel Dante Network Card for iLive Mix Rack System
Allen & Heath M-Dante 64x64 Channel Dante Network Card for iLive Mix Rack System
Allen & Heath are implementing the Brooklyn II card from Audinate which takes Dante™ technology to a new level with a full 64 channels of bi-directional audio. The M-Dante card can be fitted into Port B of any iLive MixRack for ...
Compact Personal Mixer
Allen & Heath ME-1 Compact Personal Mixer
The Allen & Heath ME-1 Personal Mixer puts the musician in control of their own monitor mix. Each performer can be given a tailored setup that works perfectly for them, whether they crave maximum control over the fine details of ...
Dual 64 Channel MADI Interface Card with Aux I/O for iLive
Allen & Heath M-MADI-A Dual 64 Channel MADI Interface Card with Aux I/O for iLive
Dual port MADI card supports two streams of 64 channel bi-directional 24-bit 48kHz serial digital audio transmission using two 75 ohm coaxial cables per port. An additional AUX connector can be configured to mirror stream 1 outputs, pass ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Monitor Mixer, POE Powered
Allen & Heath ME-500 Monitor Mixer, POE Powered
The Allen & Heath ME-500 is a 16 channel personal mixer. The ME-500 personal mixer’s intuitive hands-on controls and crisp visual display make it easy for musicians to quickly build and control their own monitor mixes. With plug ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Allen & Heath ME-U
10-Port PoE Monitor Hub

OUR PART #  ME-U

Product Information:

The Allen & Heath ME-U is a touring-grade 10-port PoE hub providing power and audio to connect multiple ME-1 personal mixers. It comes with a standard input card to interface with GLD dSnake, iLive ACE or Aviom® A-Net®, which can be replaced with a MADI, Dante or EtherSound card to take a digital feed of up to 40 sources from third party systems.

Allen & Heath ME-U Features:

  • 10 ports with locking Ethercon connectors
  • Daisy chain for more outputs - up to 19 ME-1s with 2 hubs
  • Each port provides power + 40 audio sources to connected ME-1s
  • Touring grade build quality
  • 2U rack or desk mounting
  • Multi-purpose Networkport:
    • Connect PC or Mac for ‘web page’ setup of unit name and IP address, and manual entry of channel names
    • Connect iLive AH-Net network to pick up channel names automatically from an iLive system.

Allen & Heath ME-U Specifications:

  • Inputs: 40 inputs (Cat5), Stereo Aux, Ambient Mic
  • Outputs: 2x Stereo (Line or Headphones), Mono Line Out
  • Input Control: Level, Mute, Pan, Solo, Trim All
  • Master Control: Level, Mute, 3-band EQ, Limiter
  • Group Control: Level, Mute, Level/Pan for sources within Group
  • Groups: 16, Up to 40 sources assignable
  • Presets: 16, Store input Levels, Mutes, Pans, Key assign, Names, Group sources
  • Config: Stores Setup and all Presets
  • Names: Channels, Keys, Unit, Presets, Config
  • USB Data Port: Individual Presets or Config transfer, Firmware update
  • Cat5 Audio and PoE: Link In and Link Out, locking EtherCon connectors
  • Stereo Out:
    • Stereo 1/4" and 3.5mm Jacks
    • Headphones 300mW+300mW into 100 Ohm load
    • Max +21dBu
  • Mono Output:
    • Balanced TRS Jack
    • Nominal 0dBu, Max +18dBu
  • Aux Input:
    • Stereo 3.5mm Jack
    • Nominal -8dBu, Max +10dBu
    • Input Impedance >10kOhm
  • AD/DA Conversion: 24-bit Delta/Sigma, 48kHz
  • Residual Output Noise: -95dBu (Level down, 20-20kHz)
  • Frequency response: +0/-1dB 10Hz to 20kHz
  • Mains Power Unit (supplied): 100-240V AC, 50/60Hz in, 12V DC 1.25A out
  • Power over Cat5 cable (PoE): 10W (Requires 13W from PoE hub)
  • Dimensions (WxDxH): 8.9" x 5.9" x 2.2" (225 x 150 x 55mm)
  • Weight (including phones hook): 2 lbs (900g)
64x64 Channel Dante Network Card for iLive Mix Rack System
Allen & Heath M-Dante 64x64 Channel Dante Network Card for iLive Mix Rack System
Allen & Heath are implementing the Brooklyn II card from Audinate which takes Dante™ technology to a new level with a full 64 channels of bi-directional audio. The M-Dante card can be fitted into Port B of any iLive MixRack for ...
Compact Personal Mixer
Allen & Heath ME-1 Compact Personal Mixer
The Allen & Heath ME-1 Personal Mixer puts the musician in control of their own monitor mix. Each performer can be given a tailored setup that works perfectly for them, whether they crave maximum control over the fine details of ...
Dual 64 Channel MADI Interface Card with Aux I/O for iLive
Allen & Heath M-MADI-A Dual 64 Channel MADI Interface Card with Aux I/O for iLive
Dual port MADI card supports two streams of 64 channel bi-directional 24-bit 48kHz serial digital audio transmission using two 75 ohm coaxial cables per port. An additional AUX connector can be configured to mirror stream 1 outputs, pass ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Monitor Mixer, POE Powered
Allen & Heath ME-500 Monitor Mixer, POE Powered
The Allen & Heath ME-500 is a 16 channel personal mixer. The ME-500 personal mixer’s intuitive hands-on controls and crisp visual display make it easy for musicians to quickly build and control their own monitor mixes. With plug ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM