Allen & Heath ME-1
Compact Personal Mixer

OUR PART #  ME-1-AH


The Allen & Heath ME-1 Personal Mixer puts the musician in control of their own monitor mix. Each performer can be given a tailored setup that works perfectly for them, whether they crave maximum control over the fine details of their mix or just want the minimum of keys to press. Operation is intuitive and elegant, with simple controls, clear visual feedback and custom naming for instant familiarity.

ME-1 is the cornerstone of the ME Personal Mixing System and is ready to use with the Allen & Heath iLive and GLD series digital mixers. ME-1 is complemented by the ME-U hub, which opens up the benefits of ME to users of other professional digital mixers via Dante, EtherSound or MADI. ME-1 also has an Aviom® compatibility mode for use with Aviom® Pro16® systems.

Allen & Heath ME-1 Personal Mixer Features:

  • Fully customizable
  • Intuitive operation
  • Compact, smart design
  • 40 sources from GLD or iLive
  • Compatible with MADI, Dante or EtherSound via ME-U hub
  • Daisy chain or use standard PoE Ethernet hubs
  • 16 assignable keys to suit application

Allen & Heath ME-1 Personal Mixer Specifications:

  • Inputs: 40 inputs (Cat5), Stereo Aux, Ambient Mic
  • Outputs: 2x Stereo (Line or Headphones), Mono Line Out
  • Input Control: Level, Mute, Pan, Solo, Trim All
  • Master Control: Level, Mute, 3-band EQ, Limiter
  • Group Control: Level, Mute, Level/Pan for sources within Group
  • Groups: 16, Up to 40 sources assignable
  • Presets: 16, Store input Levels, Mutes, Pans, Key assign, Names, Group sources
  • Config: Stores Setup and all Presets
  • Names: Channels, Keys, Unit, Presets, Config
  • USB Data Port: Individual Presets or Config transfer, Firmware update
  • Cat5 Audio and PoE: Link In and Link Out, locking EtherCon connectors
  • Stereo Out:
    • Stereo 1/4" and 3.5mm Jacks
    • Headphones 300mW+300mW into 100 ohm load
    • Max +21dBu
  • Mono Output:
    • Balanced TRS Jack
    • Nominal 0dBu, Max +18dBu
  • Aux Input:
    • Stereo 3.5mm Jack
    • Nominal -8dBu, Max +10dBu
    • Input Impedance >10kOhm
  • AD/DA Conversion: 24-bit Delta/Sigma, 48kHz
  • Residual Output Noise: -95dBu (Level down, 20-20kHz)
  • Frequency response: +0/-1dB 10Hz to 20kHz
  • Mains Power Unit (supplied): 100-240V AC, 50/60Hz in, 12V DC 1.25A out
  • Power over Cat5 cable (PoE): 10W (Requires 13W from PoE hub)
  • Dimensions: 8.9" W x 5.9" D x 2.2" H (225 x 150 x 55 mm)
  • Weight (inc phones hook): 2 lbs (900g)
10-Port PoE Monitor Hub
Allen & Heath ME-U 10-Port PoE Monitor Hub
The Allen & Heath ME-U is a touring-grade 10-port PoE hub providing power and audio to connect multiple ME-1 personal mixers. It comes with a standard input card to interface with GLD dSnake, iLive ACE or Aviom® A-Net®, which can be ...
64x64 Channel Dante Network Card for iLive Mix Rack System
Allen & Heath M-Dante 64x64 Channel Dante Network Card for iLive Mix Rack System
Allen & Heath are implementing the Brooklyn II card from Audinate which takes Dante™ technology to a new level with a full 64 channels of bi-directional audio. The M-Dante card can be fitted into Port B of any iLive MixRack for ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Dual 64 Channel MADI Interface Card with Aux I/O for iLive
Allen & Heath M-MADI-A Dual 64 Channel MADI Interface Card with Aux I/O for iLive
Dual port MADI card supports two streams of 64 channel bi-directional 24-bit 48kHz serial digital audio transmission using two 75 ohm coaxial cables per port. An additional AUX connector can be configured to mirror stream 1 outputs, pass ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Allen & Heath ME-1
Compact Personal Mixer

OUR PART #  ME-1-AH

Product Information:

The Allen & Heath ME-1 Personal Mixer puts the musician in control of their own monitor mix. Each performer can be given a tailored setup that works perfectly for them, whether they crave maximum control over the fine details of their mix or just want the minimum of keys to press. Operation is intuitive and elegant, with simple controls, clear visual feedback and custom naming for instant familiarity.

ME-1 is the cornerstone of the ME Personal Mixing System and is ready to use with the Allen & Heath iLive and GLD series digital mixers. ME-1 is complemented by the ME-U hub, which opens up the benefits of ME to users of other professional digital mixers via Dante, EtherSound or MADI. ME-1 also has an Aviom® compatibility mode for use with Aviom® Pro16® systems.

Allen & Heath ME-1 Personal Mixer Features:

  • Fully customizable
  • Intuitive operation
  • Compact, smart design
  • 40 sources from GLD or iLive
  • Compatible with MADI, Dante or EtherSound via ME-U hub
  • Daisy chain or use standard PoE Ethernet hubs
  • 16 assignable keys to suit application

Allen & Heath ME-1 Personal Mixer Specifications:

  • Inputs: 40 inputs (Cat5), Stereo Aux, Ambient Mic
  • Outputs: 2x Stereo (Line or Headphones), Mono Line Out
  • Input Control: Level, Mute, Pan, Solo, Trim All
  • Master Control: Level, Mute, 3-band EQ, Limiter
  • Group Control: Level, Mute, Level/Pan for sources within Group
  • Groups: 16, Up to 40 sources assignable
  • Presets: 16, Store input Levels, Mutes, Pans, Key assign, Names, Group sources
  • Config: Stores Setup and all Presets
  • Names: Channels, Keys, Unit, Presets, Config
  • USB Data Port: Individual Presets or Config transfer, Firmware update
  • Cat5 Audio and PoE: Link In and Link Out, locking EtherCon connectors
  • Stereo Out:
    • Stereo 1/4" and 3.5mm Jacks
    • Headphones 300mW+300mW into 100 ohm load
    • Max +21dBu
  • Mono Output:
    • Balanced TRS Jack
    • Nominal 0dBu, Max +18dBu
  • Aux Input:
    • Stereo 3.5mm Jack
    • Nominal -8dBu, Max +10dBu
    • Input Impedance >10kOhm
  • AD/DA Conversion: 24-bit Delta/Sigma, 48kHz
  • Residual Output Noise: -95dBu (Level down, 20-20kHz)
  • Frequency response: +0/-1dB 10Hz to 20kHz
  • Mains Power Unit (supplied): 100-240V AC, 50/60Hz in, 12V DC 1.25A out
  • Power over Cat5 cable (PoE): 10W (Requires 13W from PoE hub)
  • Dimensions: 8.9" W x 5.9" D x 2.2" H (225 x 150 x 55 mm)
  • Weight (inc phones hook): 2 lbs (900g)
10-Port PoE Monitor Hub
Allen & Heath ME-U 10-Port PoE Monitor Hub
The Allen & Heath ME-U is a touring-grade 10-port PoE hub providing power and audio to connect multiple ME-1 personal mixers. It comes with a standard input card to interface with GLD dSnake, iLive ACE or Aviom® A-Net®, which can be ...
64x64 Channel Dante Network Card for iLive Mix Rack System
Allen & Heath M-Dante 64x64 Channel Dante Network Card for iLive Mix Rack System
Allen & Heath are implementing the Brooklyn II card from Audinate which takes Dante™ technology to a new level with a full 64 channels of bi-directional audio. The M-Dante card can be fitted into Port B of any iLive MixRack for ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Dual 64 Channel MADI Interface Card with Aux I/O for iLive
Allen & Heath M-MADI-A Dual 64 Channel MADI Interface Card with Aux I/O for iLive
Dual port MADI card supports two streams of 64 channel bi-directional 24-bit 48kHz serial digital audio transmission using two 75 ohm coaxial cables per port. An additional AUX connector can be configured to mirror stream 1 outputs, pass ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM