Kramer WP-571
Active Wall Plate - HDMI over DGKat Twisted Pair Transmitter

OUR PART #  WP-571

Log In for price!

Don't have an account? Apply today!
Select a Model: (shipping times are approximate)

The Kramer WP-571 is a DGKat™ wall plate transmitter for HDMI signals. The WP-571 converts an HDMI signal to a DGKat™ twisted pair signal that it transmits to a WP-572.

Available Finishes:

  • White
  • Off-White
  • Grey

Kramer WP-571 Features:

  • Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel)
  • HDTV Compatible
  • HDCP Compliant
  • DGKat™ Signal Integration: Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted paircables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
  • HDMI Support: HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD
  • 3D Pass-Through
  • System Range: Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable
  • Cable: Requires shielded twisted pair (STP) cable. For optimum range and performance use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables.Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground
  • EDID PassThru: Passes EDID signals between the source and display
  • Active Power Indication: The ON LED lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached
  • Power Connect™ System: A single connection to the transmitter powers the receiver

Kramer WP-571 Specifications:

  • Inputs: 1 HDMI connector
  • Outputs: 1 DGKat™ twisted pair on a RJ-45 connector
  • Bandwidth: Up to 4.95Gbps data rate (1.65Gbps per graphics channel)
  • Compliance with HDMI Standard: Supports HDMI and HDCP
  • Power Consumption: 12V DC, 360mA (transmitter and receiver together)
  • Dimensions (WxDxH): 1.3" x 1.42" x 4.1" (3.3cm x 3.6cm x 10.4cm)
  • Weight: 0.18 lbs (0.08 kg)
  • Accessories: Power supply.

Kramer WP-571
Active Wall Plate - HDMI over DGKat Twisted Pair Transmitter

OUR PART #  WP-571

Product Information:

The Kramer WP-571 is a DGKat™ wall plate transmitter for HDMI signals. The WP-571 converts an HDMI signal to a DGKat™ twisted pair signal that it transmits to a WP-572.

Available Finishes:

  • White
  • Off-White
  • Grey

Kramer WP-571 Features:

  • Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel)
  • HDTV Compatible
  • HDCP Compliant
  • DGKat™ Signal Integration: Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted paircables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
  • HDMI Support: HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD
  • 3D Pass-Through
  • System Range: Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable
  • Cable: Requires shielded twisted pair (STP) cable. For optimum range and performance use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables.Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground
  • EDID PassThru: Passes EDID signals between the source and display
  • Active Power Indication: The ON LED lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached
  • Power Connect™ System: A single connection to the transmitter powers the receiver

Kramer WP-571 Specifications:

  • Inputs: 1 HDMI connector
  • Outputs: 1 DGKat™ twisted pair on a RJ-45 connector
  • Bandwidth: Up to 4.95Gbps data rate (1.65Gbps per graphics channel)
  • Compliance with HDMI Standard: Supports HDMI and HDCP
  • Power Consumption: 12V DC, 360mA (transmitter and receiver together)
  • Dimensions (WxDxH): 1.3" x 1.42" x 4.1" (3.3cm x 3.6cm x 10.4cm)
  • Weight: 0.18 lbs (0.08 kg)
  • Accessories: Power supply.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM