ETC/Elec Theatre Controls S4LEDD-0B
Source Four LED Daylight in Black, Engine Body Only, Stage Pin Connector

OUR PART #  S4LEDD-0-B


This Source Four LED Daylight fixture from ETC is the light engine body only that's made for use with zoom lens tubes and retrofit of existing fixtures. Includes PowerCon power input cable with Stage Pin connector, C-clamp, Soft focus diffuser and an A-size pattern holder. This unit comes in a black finish.

Drop In Iris for Source Four
ETC/Elec Theatre Controls 400RS Drop In Iris for Source Four
This accessory is a Drop In Iris for 5-90 degree Source Four light fixtures.
10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC's DPJ-10 is a 10 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.
Desire D60 Power Input Cable, Stage Pin
ETC/Elec Theatre Controls DPA-B Desire D60 Power Input Cable, Stage Pin
This is an optional accessory when ordering the Desire D60 Studio LED Luminaire from ETC. It's a Power Input Cable that is a 5’ PowerCon to 20A two pin and ground (stage pin) connector (this is a replacement only).
Black Top Hat, 5" Tube
ETC/Elec Theatre Controls 400TH Black Top Hat, 5" Tube
This accessory is a black Top Hat with a 5" tube that intended to be used with 19-50 degree Source Four and Source Four jr fixtures.
C-Clamp for ETC Fixtures, Black
ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black
This C-Clamp from ETC is useful for mounting and locking lighting fixtures to a grid pipe and includes an M12 thread screw for the fixture yoke.
B Size Pattern Holder - Glass
ETC/Elec Theatre Controls 400PH-G B Size Pattern Holder - Glass
This Source Four accessory is a Glass Pattern Holder (B Size) for 5-90 Degree Source Four Fixtures.  Specifications: X = 2.75” Y = 3.75”
30" Source Four Safety Cable in Black
ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black
This black safety is 30" in length and is a useful Source Four fixture accessory.Specifications: Cable is a 30" long, 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load ...
Pattern Holder - Size A
ETC/Elec Theatre Controls 400PH-A Pattern Holder - Size A
This Source Four accessory is an A size for 5º-90º Source Four fixtures.Specifications:  X = 3.25” Y = 3.75”
Pattern Holder - Size B
ETC/Elec Theatre Controls 400PH-B Pattern Holder - Size B
This Source Four accessory is a B size Pattern Holder for 5º-90º Source Four fixtures.Specifications:  X = 2.75” Y = 3.75”
Gel Frame for Source Four PAR
ETC/Elec Theatre Controls 407CF Gel Frame for Source Four PAR
This Source Four PAR accessory is a Color Frame that comes with a black finish.
Donut
ETC/Elec Theatre Controls 400DN Donut
This Source Four fixture accessory is a 6.25-inch donut that controls flare in template projections.NOTE: Use A-size pattern holder with Source Four for maximum pattern effectiveness.
Color Frame for the Source Four
ETC/Elec Theatre Controls 400CF Color Frame for the Source Four
Product shown in image is for illustrative purposes only. Actual product may vary in appearance.Color Frame for the Source Four.
25°-50° Black Source 4 Zoom Lens Assembly
ETC/Elec Theatre Controls 42550LT 25°-50° Black Source 4 Zoom Lens Assembly
ETC’s 42550LT is a 25°-50° zoom lens tube assembly—in Black—designed to be used with ETC’s Source Four incandescent and LED ellipsoidal light engine bodies.ETC’s patented one hand zoom and focus operation makes adjusting the ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
15/30 S4 Zoom Assembly
ETC/Elec Theatre Controls 41530LT 15/30 S4 Zoom Assembly
With Source Four® Zoom you only need one fixture for a variety of field angles. Plus, Source Four Zoom makes it easy: ETC's patented one-handed zoom operation makes adjustments quick, simple and safe. Technicians can focus with one hand ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Source Four LED Fresnel Adapter
ETC/Elec Theatre Controls S4LEDFRES Source Four LED Fresnel Adapter
The ETC Source Four LED Fresnel adapter fits any Source Four LED light engine and creates tunable-white or brightly-colored washes with soft edges. The light blends evenly – with smooth overlap and uniform distribution – for washes ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Source Four LED CYC Lens Adapter
ETC/Elec Theatre Controls S4LEDCYC Source Four LED CYC Lens Adapter
The Source Four LED™ just got even more versatile. By removing the luminaire’s lens barrel and attaching a Source Four LED CYC adapter, any Source Four LED can become a superior tool for lighting cycloramas. Other cyc lights only serve ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Smooth Wash Diffuser for 5 Degree Lens Tube
ETC/Elec Theatre Controls S4LED-SWD14 Smooth Wash Diffuser for 5 Degree Lens Tube
This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The smooth wash diffuser is placed into the gel frame slot of the lens tube. This type ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC/Elec Theatre Controls DPJ-5 5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC's DPJ-5 is a 5 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Smooth Wash Diffuser for 10 Degree Lens Tube
ETC/Elec Theatre Controls S4LED-SWD12 Smooth Wash Diffuser for 10 Degree Lens Tube
This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The smooth wash diffuser is placed into the gel frame slot of the lens tube. This ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Smooth Wash Diffuser for 7.5 Gel Frame
ETC/Elec Theatre Controls S4LED-SWD7 Smooth Wash Diffuser for 7.5 Gel Frame
This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The Smooth Wash Diffuser is placed into the gel frame slot of the lens tube. This type ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Smooth Wash Diffuser for 6.25 Gel Frame
ETC/Elec Theatre Controls S4LED-SWD6 Smooth Wash Diffuser for 6.25 Gel Frame
This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The Smooth Wash Diffuser is placed into the gel frame slot of the lens tube. This type ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Black Half Hat
ETC/Elec Theatre Controls 400HH Black Half Hat
This Source Four accessory is a black Half Hat that measures 7x7x6 inches. Like the Top Hat this unit helps to control and reduce flare but from one side only.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Source Four LED Soft Focus Diffuser
ETC/Elec Theatre Controls S4LED-SFD Source Four LED Soft Focus Diffuser
The Soft Focus Diffuser is a diffuser that is an accessory for Source Four LED fixtures that fits into a standard A-Size pattern holder and delivers beautiful homogenized light when not in sharp focus. You can also use this diffuser with ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

ETC/Elec Theatre Controls S4LEDD-0B
Source Four LED Daylight in Black, Engine Body Only, Stage Pin Connector

OUR PART #  S4LEDD-0-B

Product Information:

This Source Four LED Daylight fixture from ETC is the light engine body only that's made for use with zoom lens tubes and retrofit of existing fixtures. Includes PowerCon power input cable with Stage Pin connector, C-clamp, Soft focus diffuser and an A-size pattern holder. This unit comes in a black finish.

Drop In Iris for Source Four
ETC/Elec Theatre Controls 400RS Drop In Iris for Source Four
This accessory is a Drop In Iris for 5-90 degree Source Four light fixtures.
10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC's DPJ-10 is a 10 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.
Desire D60 Power Input Cable, Stage Pin
ETC/Elec Theatre Controls DPA-B Desire D60 Power Input Cable, Stage Pin
This is an optional accessory when ordering the Desire D60 Studio LED Luminaire from ETC. It's a Power Input Cable that is a 5’ PowerCon to 20A two pin and ground (stage pin) connector (this is a replacement only).
Black Top Hat, 5" Tube
ETC/Elec Theatre Controls 400TH Black Top Hat, 5" Tube
This accessory is a black Top Hat with a 5" tube that intended to be used with 19-50 degree Source Four and Source Four jr fixtures.
C-Clamp for ETC Fixtures, Black
ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black
This C-Clamp from ETC is useful for mounting and locking lighting fixtures to a grid pipe and includes an M12 thread screw for the fixture yoke.
B Size Pattern Holder - Glass
ETC/Elec Theatre Controls 400PH-G B Size Pattern Holder - Glass
This Source Four accessory is a Glass Pattern Holder (B Size) for 5-90 Degree Source Four Fixtures.  Specifications: X = 2.75” Y = 3.75”
30" Source Four Safety Cable in Black
ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black
This black safety is 30" in length and is a useful Source Four fixture accessory.Specifications: Cable is a 30" long, 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load ...
Pattern Holder - Size A
ETC/Elec Theatre Controls 400PH-A Pattern Holder - Size A
This Source Four accessory is an A size for 5º-90º Source Four fixtures.Specifications:  X = 3.25” Y = 3.75”
Pattern Holder - Size B
ETC/Elec Theatre Controls 400PH-B Pattern Holder - Size B
This Source Four accessory is a B size Pattern Holder for 5º-90º Source Four fixtures.Specifications:  X = 2.75” Y = 3.75”
Gel Frame for Source Four PAR
ETC/Elec Theatre Controls 407CF Gel Frame for Source Four PAR
This Source Four PAR accessory is a Color Frame that comes with a black finish.
Donut
ETC/Elec Theatre Controls 400DN Donut
This Source Four fixture accessory is a 6.25-inch donut that controls flare in template projections.NOTE: Use A-size pattern holder with Source Four for maximum pattern effectiveness.
Color Frame for the Source Four
ETC/Elec Theatre Controls 400CF Color Frame for the Source Four
Product shown in image is for illustrative purposes only. Actual product may vary in appearance.Color Frame for the Source Four.
25°-50° Black Source 4 Zoom Lens Assembly
ETC/Elec Theatre Controls 42550LT 25°-50° Black Source 4 Zoom Lens Assembly
ETC’s 42550LT is a 25°-50° zoom lens tube assembly—in Black—designed to be used with ETC’s Source Four incandescent and LED ellipsoidal light engine bodies.ETC’s patented one hand zoom and focus operation makes adjusting the ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
15/30 S4 Zoom Assembly
ETC/Elec Theatre Controls 41530LT 15/30 S4 Zoom Assembly
With Source Four® Zoom you only need one fixture for a variety of field angles. Plus, Source Four Zoom makes it easy: ETC's patented one-handed zoom operation makes adjustments quick, simple and safe. Technicians can focus with one hand ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Source Four LED Fresnel Adapter
ETC/Elec Theatre Controls S4LEDFRES Source Four LED Fresnel Adapter
The ETC Source Four LED Fresnel adapter fits any Source Four LED light engine and creates tunable-white or brightly-colored washes with soft edges. The light blends evenly – with smooth overlap and uniform distribution – for washes ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Source Four LED CYC Lens Adapter
ETC/Elec Theatre Controls S4LEDCYC Source Four LED CYC Lens Adapter
The Source Four LED™ just got even more versatile. By removing the luminaire’s lens barrel and attaching a Source Four LED CYC adapter, any Source Four LED can become a superior tool for lighting cycloramas. Other cyc lights only serve ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Smooth Wash Diffuser for 5 Degree Lens Tube
ETC/Elec Theatre Controls S4LED-SWD14 Smooth Wash Diffuser for 5 Degree Lens Tube
This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The smooth wash diffuser is placed into the gel frame slot of the lens tube. This type ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC/Elec Theatre Controls DPJ-5 5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC's DPJ-5 is a 5 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Smooth Wash Diffuser for 10 Degree Lens Tube
ETC/Elec Theatre Controls S4LED-SWD12 Smooth Wash Diffuser for 10 Degree Lens Tube
This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The smooth wash diffuser is placed into the gel frame slot of the lens tube. This ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Smooth Wash Diffuser for 7.5 Gel Frame
ETC/Elec Theatre Controls S4LED-SWD7 Smooth Wash Diffuser for 7.5 Gel Frame
This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The Smooth Wash Diffuser is placed into the gel frame slot of the lens tube. This type ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Smooth Wash Diffuser for 6.25 Gel Frame
ETC/Elec Theatre Controls S4LED-SWD6 Smooth Wash Diffuser for 6.25 Gel Frame
This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The Smooth Wash Diffuser is placed into the gel frame slot of the lens tube. This type ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Black Half Hat
ETC/Elec Theatre Controls 400HH Black Half Hat
This Source Four accessory is a black Half Hat that measures 7x7x6 inches. Like the Top Hat this unit helps to control and reduce flare but from one side only.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Source Four LED Soft Focus Diffuser
ETC/Elec Theatre Controls S4LED-SFD Source Four LED Soft Focus Diffuser
The Soft Focus Diffuser is a diffuser that is an accessory for Source Four LED fixtures that fits into a standard A-Size pattern holder and delivers beautiful homogenized light when not in sharp focus. You can also use this diffuser with ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM