Ashly TM-360
60W, 3 input Amp, 4/8 Ohms

OUR PART #  TM-360

Log In for price!

Don't have an account? Apply today!

The Ashly TM-360 is a table-top mixer and 60W mono amplifier suitable for applications that require background music with priority paging from a single microphone. There are two line level inputs and one mic/line input with switchable phantom power. Input 3 is a line input, input 2 is a line input with priority over input 3, and input 1 is a mic/line input with priority over input 2. Main speaker outputs include a 60 watt 4W connection as well as 25V and 70V outputs. 230V export versions have 60 watt 4W, 70V, and 100V outputs. A second zone output is available with a 1W 8W output as well as a balanced 600W output, and an independent 600W PRE output is available as well.

All input and speaker connections use Euroblock connectors, with inputs 2 and 3 also using summed mono dual RCA jacks. A rear panel DIP switch determines each input’s zone 2 assignment status, inputs 1 and 2 priority (mute trigger) status, inputs 2 and 3 mute link status, low cut filter, and phantom power status for input 1. The TM-360 has a power saving standby mode which can be triggered by audio inactivity or by contact closure.

Ashly TM-360 Features:

  • 3 Inputs
  • Priority Mute
  • Zone 2 Output for Selected inputs 
  • Bass & Treble Controls
  • 60W Output @ 4 Ohms, 25V, 70V (100V) 
  •  Power Saving Mode
  • Optional Rack Kit
  • 5 Year Warranty

Ashly TM-360 Specifications:

  • Rated Output Power (THD 1%): 60W (RMS)
  • OutputVoltage/Impedance:
    • USA/Canada & Associated: 4Ohms/15.5V    10.4Ohms/25V    82Ohms/70V
    • EC & Associated, Japan: 4Ohms/15.5V    82Ohms/70V    167Ohms/100V
  • Frequency Response(1W @ 1KHz):
    • Input 1,2,3 +1/-3dB, 80Hz – 15KHz
  • THD (60W @ 1KHz): <1%
  • S/N Ratio (60W @ 1KHz, A weighted): Input 1,2,3>80dB
  • Input Sensitivity:
    • Input 1 -10dBV to -50dBV
    • Input 1,2 0dBV to -20dBV
  • Tone Control:
    • Treble (10KHz) +10dB
    • Bass (100Hz) +10dB
  • Residual Noise (Input 1-3 volume min, tone at center):
    • Master volume minimum: -72dB
    • Master volume maximum: -57dB
  • Zone 2 Output:]
    • Rated power 8Ohms (RMS, THD 3%)1W
    • Balanced 600Ohms 2.4V
  • PRE Out (input -10dBV): 0dBV
  • Mix Configuration Switches:
    • SW1 Zone 2 Assign Input 1
    • SW2 Zone 2 Assign Input 2
    • SW3 Zone 2 Assign Input 3
    • SW4 VOX Trigger Input 1
    • SW5 VOX Trigger Input 2
    • SW6 Mute Link Input 2 & 3
    • SW7 Low Cut, 400Hz 6dB/Oct.
    • SW8 Ch1 Phantom Power, +18V
  • Manual Mute Contact Closure: Pins 1 & G = Input 1Mute Trigger
  • Master System Standby Contact Closure: Pins G & 2= Power Standby
  • AC Requirements:
    • 120VAC, 60Hz, 24W (USA & Canada and Associated)
    • 230VAC, 50/60Hz, 24W (EC and Associated)
  • Line Current Draw @ 120VAC 60Hz (for 230VAC models, divide line currentdraw values by 2):
    • Standby: 0.15A
    • Idle: 0.24A
    • 1/8th Power Pink Noise: 0.38A
    • 1/3rd Power Sine Wave: 0.66A
  • Thermal Dissipation (BTU/hr):
    • Standby: 26
    • Idle: 43
    • 1/8th Power Pink Noise: 53
    • 1/3rd Power Sine Wave: 75
  • Environmental: 40°F ~ 120°F (4° ~ 49°C)non-condensing
  • Weight: 8.6lb (3.9kg)
  • Dimensions (WxHxD): 11.4” x 3” x 7.3” (290mm x 76mm x 185mm)

Ashly TM-360
60W, 3 input Amp, 4/8 Ohms

OUR PART #  TM-360

Product Information:

The Ashly TM-360 is a table-top mixer and 60W mono amplifier suitable for applications that require background music with priority paging from a single microphone. There are two line level inputs and one mic/line input with switchable phantom power. Input 3 is a line input, input 2 is a line input with priority over input 3, and input 1 is a mic/line input with priority over input 2. Main speaker outputs include a 60 watt 4W connection as well as 25V and 70V outputs. 230V export versions have 60 watt 4W, 70V, and 100V outputs. A second zone output is available with a 1W 8W output as well as a balanced 600W output, and an independent 600W PRE output is available as well.

All input and speaker connections use Euroblock connectors, with inputs 2 and 3 also using summed mono dual RCA jacks. A rear panel DIP switch determines each input’s zone 2 assignment status, inputs 1 and 2 priority (mute trigger) status, inputs 2 and 3 mute link status, low cut filter, and phantom power status for input 1. The TM-360 has a power saving standby mode which can be triggered by audio inactivity or by contact closure.

Ashly TM-360 Features:

  • 3 Inputs
  • Priority Mute
  • Zone 2 Output for Selected inputs 
  • Bass & Treble Controls
  • 60W Output @ 4 Ohms, 25V, 70V (100V) 
  •  Power Saving Mode
  • Optional Rack Kit
  • 5 Year Warranty

Ashly TM-360 Specifications:

  • Rated Output Power (THD 1%): 60W (RMS)
  • OutputVoltage/Impedance:
    • USA/Canada & Associated: 4Ohms/15.5V    10.4Ohms/25V    82Ohms/70V
    • EC & Associated, Japan: 4Ohms/15.5V    82Ohms/70V    167Ohms/100V
  • Frequency Response(1W @ 1KHz):
    • Input 1,2,3 +1/-3dB, 80Hz – 15KHz
  • THD (60W @ 1KHz): <1%
  • S/N Ratio (60W @ 1KHz, A weighted): Input 1,2,3>80dB
  • Input Sensitivity:
    • Input 1 -10dBV to -50dBV
    • Input 1,2 0dBV to -20dBV
  • Tone Control:
    • Treble (10KHz) +10dB
    • Bass (100Hz) +10dB
  • Residual Noise (Input 1-3 volume min, tone at center):
    • Master volume minimum: -72dB
    • Master volume maximum: -57dB
  • Zone 2 Output:]
    • Rated power 8Ohms (RMS, THD 3%)1W
    • Balanced 600Ohms 2.4V
  • PRE Out (input -10dBV): 0dBV
  • Mix Configuration Switches:
    • SW1 Zone 2 Assign Input 1
    • SW2 Zone 2 Assign Input 2
    • SW3 Zone 2 Assign Input 3
    • SW4 VOX Trigger Input 1
    • SW5 VOX Trigger Input 2
    • SW6 Mute Link Input 2 & 3
    • SW7 Low Cut, 400Hz 6dB/Oct.
    • SW8 Ch1 Phantom Power, +18V
  • Manual Mute Contact Closure: Pins 1 & G = Input 1Mute Trigger
  • Master System Standby Contact Closure: Pins G & 2= Power Standby
  • AC Requirements:
    • 120VAC, 60Hz, 24W (USA & Canada and Associated)
    • 230VAC, 50/60Hz, 24W (EC and Associated)
  • Line Current Draw @ 120VAC 60Hz (for 230VAC models, divide line currentdraw values by 2):
    • Standby: 0.15A
    • Idle: 0.24A
    • 1/8th Power Pink Noise: 0.38A
    • 1/3rd Power Sine Wave: 0.66A
  • Thermal Dissipation (BTU/hr):
    • Standby: 26
    • Idle: 43
    • 1/8th Power Pink Noise: 53
    • 1/3rd Power Sine Wave: 75
  • Environmental: 40°F ~ 120°F (4° ~ 49°C)non-condensing
  • Weight: 8.6lb (3.9kg)
  • Dimensions (WxHxD): 11.4” x 3” x 7.3” (290mm x 76mm x 185mm)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM