Ashly ne4800D
4 AES3 In & 8 AES3 Out Audio Processor

OUR PART #  NE4800D


Connecting and controlling an audio processor for networked systems has now been simplified with Ashly's NE-Series ne4400, ne4800 and ne8800 digital signal processors. These Network Enabled (NE) processors offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.

Standard units are analog line input/output format of 4x4 (4400), 4x8 (4800), and 8x8 (8800) with four option bays supporting network audio, AES/EBU, and mic input options. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit/96kHz processors with sample rates of either 48 KHz or 96 KHz. Processing blocks include an 8x8 matrix mixer, a full array of variable Q graphic and parametric equalization, crossover filters to 8th-order Butterworth, Bessel, Linkwitz, and Notched-Linkwitz, an extremely advanced automatic feedback suppressor, autolevelers, compressors, matrix duckers, limiters, frequency-keyed noise gates, time delay up to 1365 ms on every channel, sinewave, pink noise, and white noise generators.

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Ashly's Protea NE Software on a PC platform. Hot-plug software control allows you to plug any function into any channel block even when running live audio with no latency or recompiling necessary. Automatic DHCP network IP configuration reduces network set up time. No front panel controls and multi-level software security with password access assures you a tamperproof audio system.

Additional features include: network audio routing at matrix mixer to inputs from outputs, or in/out of matrix mixer, 8 link groups on most functions, automatic master clock switchover between network, word clock, AES/EBU, and internal clock, a high-performance analog audio path - dynamic range exceeding 114 dB, support of Ashly digital remote controls, programmable 8 channel 5V logic input or output control, 8 channels of 0 to 5V analog level control, word clock input and output and a front panel full meter bridge with mute keys.

Available hardware options are: 4-channel mic/line input option with software controllable gain and phantom power, CobraNet network audio input and output, EtherSound network audio input and output, AES/EBU digital audio input and AES/EBU digital audio output.

Ashly ne4800D Features:

  • Three models - 4x4, 4x8, and 8x8 format
  • Optional mic inputs, Cobranet, Ethersound, and AES/EBU
  • 10/100 Ethernet and RS-232 computer interface is standard
  • Extensive DSP Available
  • Easy and intuitive user interface
  • 24-bit audio resolution
  • 32-bit SHARC DSPs
  • Sample rates of 48 KHz and 96 KHz
  • Hot-plug software control
  • Automatic DHCP network IP configuration
  • Butterworth, Bessel, Linkwitz, and Notched-Linkwitz filters
  • Advanced automatic feedback suppression
  • Word clock input and output
  • Euroblock connectors for audio, preset recall, DC remote level, and data I/O
  • Six dedicated remotes for Level, Logic I/O, and Programmable Functions
  • Third party control friendly
  • Input and output metering
  • Multi-level Security
  • Five year worry-free warranty

Ashly ne4800D Specifications:

Overall Performance

  • Frequency Response, 20 Hz – 20kHz:
    • Analog In, Digital Out: +/- 0.1 dB
    • Digital In, Analog Out: +/-0.25 dB
    • Analog In, Analog Out: +/- 0.25 dB
    • Digital In, Digital Out:  N/A
  • Dynamic Range, 20Hz-20kHz, unweighted:
    • Analog In, Digital Out: > 115 dB
    • Digital In, Analog Out: > 114 dB
    • Analog In, Analog Out: > 114 dB
    • Digital In, Digital Out:  N/A
  • THD+N, 1kHz, +20dBu analog (-1dBFS digital):
    • Analog In, Digital Out: < 0.001 %
    • Digital In, Analog Out: < 0.002 %
    • Analog In, Analog Out: < 0.002 %
    • Digital In, Digital Out: < 0.00001 %
  • Latency at 48 KHz (96 kHz)4:
    • Analog In, Digital Out: 1.42 ms (0.71 ms)
    • Digital In, Analog Out: 0.90 ms (0.45 ms)
    • Analog In, Analog Out: 2.21 ms (1.11 ms)
    • Digital In, Digital Out: 0.10 ms (0.05 ms)

Audio Inputs

  • Input Type:
    • Analog: Active balanced Euroblock
    • Digital: Transformer balanced female XLR
  • Input Impedance:
    • Analog: 20 kOhms
    • Digital: 110 Ohms
  • Maxinput level:
    • Analog: +20 dBu
    • Digital: 7.0Vpp

Audio Outputs

  • Output Type:
    • Analog: Servo-balanced Euroblock
    • Digital: Transformer balanced male XLR
  • Output Impedance:
    • Analog: 20 Ohms
    • Digital: 5.0 Vpp

Digital Audio Hardware

  • Sample Rates: 48 kHz, 96 kHz
  • DSP Processing: 32-bit floating-point Sharc processor array
  • Audio Input Source Selection: Selectable in adjacent channel pairs from analog, digital, or network inputs
  • Network Audio Routing: Selectable between input/output or internal to matrix mixer
  • Digital Audio Output Jitter: 0.5 ns average, 1.0 ns peak

Digital Control

  • Ethernet Control: Standard RJ45 10/100 Ethernet with autoconfiguration
  • RS-232 Control: Standard female Dsub9 jack
  • 4-pin active remote: 4-pin Euroblock for phantom-powered bidirectional remotes
  • Logic Inputs: 9-pin Euroblock for (8) assignable 5V logic inputs
  • Logic Outputs: Shared with logic inputs. +12V at 10mA output high, 100mAinput low

Analog Control

  • Remote attenuators: 10-pin Euroblock for (8) assignable 0-5 VDC passiveremote attenuators

General

  • Power Requirements: 90 – 240 VAC, 50 – 60 Hz, 70 W maximum
  • Shipping weight: 14 lbs. (6.35 kg)
  • Dimensions: 19.0” L x 3.5” H x 8.5” D (48.26 cm x 8.89 cm x 21.59 cm)
  • Environmental: 40-12

DSP Functions

Automatic Feedback Suppressor

  • Filters: 12
  • Detection frequency range: 25 Hz – 20 kHz
  • FilterModes:
    • Floating
    • Restricted
    • Manual
    • Locked
  • Sensitivity Control: 5 levels
  • Floating Filter Reset: 5 seconds to 24 hours
  • Parametric EQ: 10-, 6-, 4-, and 2-band
  • Graphic EQ: 31-band, constant or proportional Q

Crossover Filters

  • Type: 
    • Linkwitz-Riley
    • Notched Linkwitz- Riley
    • Bessel
    • Butterworth

Low-Pass and High-Pass Filters

  • Type:
    • Linkwitz-Riley
    • Notched Linkwitz- Riley
    • Bessel
    • Butterworth
  • Notch: 1/64 oct. to 4 octaves
  • Frequency Range: 20 Hz – 20 kHz, 1 Hz increments

Band-Pass

  • Frequency Range: 20 Hz – 20 kHz, 1 Hz increments
  • Bandwidth: 1/64 oct. to 4 octaves
  • All-Pass: Second-Order (-180 degrees)
  • Vari-Q LPF and HPF: Second-order
  • Frequency Range: 20 Hz – 20 kHz,1 Hz increments
  • Filter Q: Adjustable from 0.267 to 3.047
  • Shelving Filters Selectable 6 db/oct. or 12 dB/oct.
  • Frequency Range: 20 Hz – 20 kHz in 1 Hz increments
  • Boost/cut range: -15 dB to +15 dB, 0.1 dB increments

Additional DSP Blocks

  • Delay: Up to 1.365 seconds
  • Ducker: Duck at input or in mixer
  • Gate: Frequency keyable
  • Signal Generator: Sinewave, white and pink noise
  • Matrix Mixer
  • Compressor
  • Limiter
  • Autoleveler
8 channel Network Fader Remote Control
Ashly FR-8 8 channel Network Fader Remote Control
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Programmable Zone Controller, Wall Mount, Six Button
Ashly WR-5 Programmable Zone Controller, Wall Mount, Six Button
The WR-5 is a microprocessor-based remote control unit for use with NE Series Amplifiers and processors and the Protea 24.24M. The WR-5 is designed to fit into a standard electrical wall box for remote control of assignable functions. ...
Network Fader Remote Control, 16 Channel
Ashly FR-16 Network Fader Remote Control, 16 Channel
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Remote, 6-button Network
Ashly NEWR-5 Remote, 6-button Network
The neWR-5 is a programmable Ethernet based remote control unit for Ashly NE Series and Pêma products. Connecting and powering the neWR-5 is done using standard Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch or ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
2 Control Level Wallplate Remote for Ashly 24.24M
Ashly WR-1 2 Control Level Wallplate Remote for Ashly 24.24M
The WR-1 is an assignable, dual potentiometer remote volume control for the 24.24M. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Ashly ne4800D
4 AES3 In & 8 AES3 Out Audio Processor

OUR PART #  NE4800D

Product Information:

Connecting and controlling an audio processor for networked systems has now been simplified with Ashly's NE-Series ne4400, ne4800 and ne8800 digital signal processors. These Network Enabled (NE) processors offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.

Standard units are analog line input/output format of 4x4 (4400), 4x8 (4800), and 8x8 (8800) with four option bays supporting network audio, AES/EBU, and mic input options. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit/96kHz processors with sample rates of either 48 KHz or 96 KHz. Processing blocks include an 8x8 matrix mixer, a full array of variable Q graphic and parametric equalization, crossover filters to 8th-order Butterworth, Bessel, Linkwitz, and Notched-Linkwitz, an extremely advanced automatic feedback suppressor, autolevelers, compressors, matrix duckers, limiters, frequency-keyed noise gates, time delay up to 1365 ms on every channel, sinewave, pink noise, and white noise generators.

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Ashly's Protea NE Software on a PC platform. Hot-plug software control allows you to plug any function into any channel block even when running live audio with no latency or recompiling necessary. Automatic DHCP network IP configuration reduces network set up time. No front panel controls and multi-level software security with password access assures you a tamperproof audio system.

Additional features include: network audio routing at matrix mixer to inputs from outputs, or in/out of matrix mixer, 8 link groups on most functions, automatic master clock switchover between network, word clock, AES/EBU, and internal clock, a high-performance analog audio path - dynamic range exceeding 114 dB, support of Ashly digital remote controls, programmable 8 channel 5V logic input or output control, 8 channels of 0 to 5V analog level control, word clock input and output and a front panel full meter bridge with mute keys.

Available hardware options are: 4-channel mic/line input option with software controllable gain and phantom power, CobraNet network audio input and output, EtherSound network audio input and output, AES/EBU digital audio input and AES/EBU digital audio output.

Ashly ne4800D Features:

  • Three models - 4x4, 4x8, and 8x8 format
  • Optional mic inputs, Cobranet, Ethersound, and AES/EBU
  • 10/100 Ethernet and RS-232 computer interface is standard
  • Extensive DSP Available
  • Easy and intuitive user interface
  • 24-bit audio resolution
  • 32-bit SHARC DSPs
  • Sample rates of 48 KHz and 96 KHz
  • Hot-plug software control
  • Automatic DHCP network IP configuration
  • Butterworth, Bessel, Linkwitz, and Notched-Linkwitz filters
  • Advanced automatic feedback suppression
  • Word clock input and output
  • Euroblock connectors for audio, preset recall, DC remote level, and data I/O
  • Six dedicated remotes for Level, Logic I/O, and Programmable Functions
  • Third party control friendly
  • Input and output metering
  • Multi-level Security
  • Five year worry-free warranty

Ashly ne4800D Specifications:

Overall Performance

  • Frequency Response, 20 Hz – 20kHz:
    • Analog In, Digital Out: +/- 0.1 dB
    • Digital In, Analog Out: +/-0.25 dB
    • Analog In, Analog Out: +/- 0.25 dB
    • Digital In, Digital Out:  N/A
  • Dynamic Range, 20Hz-20kHz, unweighted:
    • Analog In, Digital Out: > 115 dB
    • Digital In, Analog Out: > 114 dB
    • Analog In, Analog Out: > 114 dB
    • Digital In, Digital Out:  N/A
  • THD+N, 1kHz, +20dBu analog (-1dBFS digital):
    • Analog In, Digital Out: < 0.001 %
    • Digital In, Analog Out: < 0.002 %
    • Analog In, Analog Out: < 0.002 %
    • Digital In, Digital Out: < 0.00001 %
  • Latency at 48 KHz (96 kHz)4:
    • Analog In, Digital Out: 1.42 ms (0.71 ms)
    • Digital In, Analog Out: 0.90 ms (0.45 ms)
    • Analog In, Analog Out: 2.21 ms (1.11 ms)
    • Digital In, Digital Out: 0.10 ms (0.05 ms)

Audio Inputs

  • Input Type:
    • Analog: Active balanced Euroblock
    • Digital: Transformer balanced female XLR
  • Input Impedance:
    • Analog: 20 kOhms
    • Digital: 110 Ohms
  • Maxinput level:
    • Analog: +20 dBu
    • Digital: 7.0Vpp

Audio Outputs

  • Output Type:
    • Analog: Servo-balanced Euroblock
    • Digital: Transformer balanced male XLR
  • Output Impedance:
    • Analog: 20 Ohms
    • Digital: 5.0 Vpp

Digital Audio Hardware

  • Sample Rates: 48 kHz, 96 kHz
  • DSP Processing: 32-bit floating-point Sharc processor array
  • Audio Input Source Selection: Selectable in adjacent channel pairs from analog, digital, or network inputs
  • Network Audio Routing: Selectable between input/output or internal to matrix mixer
  • Digital Audio Output Jitter: 0.5 ns average, 1.0 ns peak

Digital Control

  • Ethernet Control: Standard RJ45 10/100 Ethernet with autoconfiguration
  • RS-232 Control: Standard female Dsub9 jack
  • 4-pin active remote: 4-pin Euroblock for phantom-powered bidirectional remotes
  • Logic Inputs: 9-pin Euroblock for (8) assignable 5V logic inputs
  • Logic Outputs: Shared with logic inputs. +12V at 10mA output high, 100mAinput low

Analog Control

  • Remote attenuators: 10-pin Euroblock for (8) assignable 0-5 VDC passiveremote attenuators

General

  • Power Requirements: 90 – 240 VAC, 50 – 60 Hz, 70 W maximum
  • Shipping weight: 14 lbs. (6.35 kg)
  • Dimensions: 19.0” L x 3.5” H x 8.5” D (48.26 cm x 8.89 cm x 21.59 cm)
  • Environmental: 40-12

DSP Functions

Automatic Feedback Suppressor

  • Filters: 12
  • Detection frequency range: 25 Hz – 20 kHz
  • FilterModes:
    • Floating
    • Restricted
    • Manual
    • Locked
  • Sensitivity Control: 5 levels
  • Floating Filter Reset: 5 seconds to 24 hours
  • Parametric EQ: 10-, 6-, 4-, and 2-band
  • Graphic EQ: 31-band, constant or proportional Q

Crossover Filters

  • Type: 
    • Linkwitz-Riley
    • Notched Linkwitz- Riley
    • Bessel
    • Butterworth

Low-Pass and High-Pass Filters

  • Type:
    • Linkwitz-Riley
    • Notched Linkwitz- Riley
    • Bessel
    • Butterworth
  • Notch: 1/64 oct. to 4 octaves
  • Frequency Range: 20 Hz – 20 kHz, 1 Hz increments

Band-Pass

  • Frequency Range: 20 Hz – 20 kHz, 1 Hz increments
  • Bandwidth: 1/64 oct. to 4 octaves
  • All-Pass: Second-Order (-180 degrees)
  • Vari-Q LPF and HPF: Second-order
  • Frequency Range: 20 Hz – 20 kHz,1 Hz increments
  • Filter Q: Adjustable from 0.267 to 3.047
  • Shelving Filters Selectable 6 db/oct. or 12 dB/oct.
  • Frequency Range: 20 Hz – 20 kHz in 1 Hz increments
  • Boost/cut range: -15 dB to +15 dB, 0.1 dB increments

Additional DSP Blocks

  • Delay: Up to 1.365 seconds
  • Ducker: Duck at input or in mixer
  • Gate: Frequency keyable
  • Signal Generator: Sinewave, white and pink noise
  • Matrix Mixer
  • Compressor
  • Limiter
  • Autoleveler
8 channel Network Fader Remote Control
Ashly FR-8 8 channel Network Fader Remote Control
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Programmable Zone Controller, Wall Mount, Six Button
Ashly WR-5 Programmable Zone Controller, Wall Mount, Six Button
The WR-5 is a microprocessor-based remote control unit for use with NE Series Amplifiers and processors and the Protea 24.24M. The WR-5 is designed to fit into a standard electrical wall box for remote control of assignable functions. ...
Network Fader Remote Control, 16 Channel
Ashly FR-16 Network Fader Remote Control, 16 Channel
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Remote, 6-button Network
Ashly NEWR-5 Remote, 6-button Network
The neWR-5 is a programmable Ethernet based remote control unit for Ashly NE Series and Pêma products. Connecting and powering the neWR-5 is done using standard Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch or ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
2 Control Level Wallplate Remote for Ashly 24.24M
Ashly WR-1 2 Control Level Wallplate Remote for Ashly 24.24M
The WR-1 is an assignable, dual potentiometer remote volume control for the 24.24M. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM