Radial Engineering Shuttle
500 Series Effects Insert/Routing Module

OUR PART #  SHUTTLE

Log In for price!

Don't have an account? Apply today!

Radial Engineering's Shuttle is a combination effects insert and routing module that enables you to bring playback tracks, effects and other non-Radial modules into the Workhorse.  This opens the doors to patching options that would otherwise require complex wiring.

The design begins with an input feed via the Workhorse or other 500 series rack.  This feeds two front panel insert loops.  The first is fully balanced to make interfacing with +4dB studio gear quick and efficient while taking full advantage of the lower noise afforded by a true balanced insert.  The second loop is unbalanced for -10dB operation.  This is the most common form of insert found in studio workstation environments.  A third loop can be accessed via the Omniport for those that are equipped with a Workhorse.  Each is equipped with an individual insert on-off selector that allows the effects to be compared.

Where the Shuttle really begins to get interesting is when using the Workhorse for real-time playback.  A feed from the recorder is sent to the Shuttle where the program track can be auditioned at the same time as a new recording track without latency of any kind.  One simply routes the mic preamp and shuttle to one of the 8 channels while auditioning via the main, monitor or headphone outputs.

Features:

  • Lets you connect any module to the Workhorse mix buss
  • Two front panel effects loops for handy patchbay convenience
  • Individual insert switches for comparing wet – dry signals
  • Third loop via Omniport for remote studio patchbay interface
500 Series 10-Slot Rackmount Chassis
Radial Engineering Powerhouse 500 Series 10-Slot Rackmount Chassis
Features: 10-slot design for maximum densityIndividual XLR & 1/4" TRS I/O on each slotEasy-Glide module alignment trayInnovative feed and link functionsRadial Engineering's Powerhouse is a 10-module 500 series power-rack designed to ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
500 Series 6-Slot Desktop Power Rack
Radial Engineering SixPack 500 Series 6-Slot Desktop Power Rack
The Radial Engineering SixPack is a desktop power rack for 500 series modules that lets you mix and match up to six modules and safely power them to create a stereo channel strip or unique signal chain.The design begins with a heavy 14 ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
12 Thumb Screws
Radial Engineering Thumb Set 12 Thumb Screws
This set of 12 thumb screws from Radial Engineering is designed for securing your 500 Series modules into a Radial enclosure.Radial Engineering Part #: R700 9100
Usually ships in 7-14 business days.
Need it sooner? Call us!

Radial Engineering Shuttle
500 Series Effects Insert/Routing Module

OUR PART #  SHUTTLE

Product Information:

Radial Engineering's Shuttle is a combination effects insert and routing module that enables you to bring playback tracks, effects and other non-Radial modules into the Workhorse.  This opens the doors to patching options that would otherwise require complex wiring.

The design begins with an input feed via the Workhorse or other 500 series rack.  This feeds two front panel insert loops.  The first is fully balanced to make interfacing with +4dB studio gear quick and efficient while taking full advantage of the lower noise afforded by a true balanced insert.  The second loop is unbalanced for -10dB operation.  This is the most common form of insert found in studio workstation environments.  A third loop can be accessed via the Omniport for those that are equipped with a Workhorse.  Each is equipped with an individual insert on-off selector that allows the effects to be compared.

Where the Shuttle really begins to get interesting is when using the Workhorse for real-time playback.  A feed from the recorder is sent to the Shuttle where the program track can be auditioned at the same time as a new recording track without latency of any kind.  One simply routes the mic preamp and shuttle to one of the 8 channels while auditioning via the main, monitor or headphone outputs.

Features:

  • Lets you connect any module to the Workhorse mix buss
  • Two front panel effects loops for handy patchbay convenience
  • Individual insert switches for comparing wet – dry signals
  • Third loop via Omniport for remote studio patchbay interface
500 Series 10-Slot Rackmount Chassis
Radial Engineering Powerhouse 500 Series 10-Slot Rackmount Chassis
Features: 10-slot design for maximum densityIndividual XLR & 1/4" TRS I/O on each slotEasy-Glide module alignment trayInnovative feed and link functionsRadial Engineering's Powerhouse is a 10-module 500 series power-rack designed to ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
500 Series 6-Slot Desktop Power Rack
Radial Engineering SixPack 500 Series 6-Slot Desktop Power Rack
The Radial Engineering SixPack is a desktop power rack for 500 series modules that lets you mix and match up to six modules and safely power them to create a stereo channel strip or unique signal chain.The design begins with a heavy 14 ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
12 Thumb Screws
Radial Engineering Thumb Set 12 Thumb Screws
This set of 12 thumb screws from Radial Engineering is designed for securing your 500 Series modules into a Radial enclosure.Radial Engineering Part #: R700 9100
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM