Shure VP89M
Medium Condenser Shotgun Microphone w/Case & Screen

OUR PART #  VP89M


The VP89 is a professional shotgun condenser microphone for use in critical broadcast and media production applications. Designed with interchangeable long, medium and short capsules, the VP89 models provide scalable, superior off-axis rejection for focus and flexibility in a wide variety of on-site locations. The VP89M is the medium length model in the series. Carrying case and foam windscreen included.

FEATURES

Updated Technology

  • State-of-the-art preamplifier redesign
  • Superior RF immunity
  • Internal low-frequency roll-of
  • Recessed low-cut filter switch for additional control
  • Smaller footprint
  • Superior Shure design and rugged, roadworthy construction

Medium Length Cartridge/Barrel Housing

  • Wider target aperture for greater degree of ambience (audience response, talk shows, live concerts)
  • Narrow pickup angle
  • Unmatch quality of off-axis rejection

SPECIFICATIONS

  • Cartridge Type: Electret Condenser
  • Polar Pattern: Hypercardioid/Lobar
  • Frequency Response: 140Hz - 20kHz
  • Output Impedance: 115 Ohms
  • Sensitivity (open circuit voltage @ 1kHz, typical): -33dBV/Pa (2.11mV)
  • Maximum SPL (1kHz at 1% THD): 2500 Ohm load = 132dB SPL // 1000 Ohm load: 128.5dB SPL
  • Signal-to-Noise Ratio: 79dB
  • Dynamic Range (at 1kHz): 2500 Ohm load = 117dB // 1000 Ohm load = 113.5dB
  • Clipping Level (at 1kHz, 1%THD): 2500 Ohms load = 4.0dBV // 1000 Ohms load = 1000 Ohms load = 0.0dBV
  • Self Noise (equivalent SPL, A-weighted, Typical): 15dB
  • Common Mode Rejection: 20Hz - 20kHz > 70dB
  • Low Frequency Filter Switch: --12dB / octave below specified frequency
  • Flat Response: 100Hz
  • Low Frequency Roll-off: 200Hz
  • Operating Temperature Range: 0 degrees F to 135 degrees F
  • Operating Relative Humidity: 0 to 95%
  • Polarity: Positive pressure on the diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Housing: Charcoal-gray metallic painted aluminum allow handle and grille with stainless steel screen
  • Power Requirements: 11 - 52VDC phantom power (IEC-61938), <2.0mA
  • Length: 9.41" 
  • Net Weight: 4.9 oz 

 

Windscreen Kit, VP89M
Shure A89MW-KIT Windscreen Kit, VP89M
Developed by Shure with Rycote, the A89LW-KIT Windshield Kit is the broadcast and media production professionals' choice when maximum isolation from wind and handling noise is required. Works with VP89L End-Address Shotgun Condenser ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Carry Case for the VP89M
Shure A89MC Carry Case for the VP89M
Carry Case for the VP89M 

Usually ships in 7-14 business days.
Need it sooner? Call us!

Shure VP89M
Medium Condenser Shotgun Microphone w/Case & Screen

OUR PART #  VP89M

Product Information:

The VP89 is a professional shotgun condenser microphone for use in critical broadcast and media production applications. Designed with interchangeable long, medium and short capsules, the VP89 models provide scalable, superior off-axis rejection for focus and flexibility in a wide variety of on-site locations. The VP89M is the medium length model in the series. Carrying case and foam windscreen included.

FEATURES

Updated Technology

  • State-of-the-art preamplifier redesign
  • Superior RF immunity
  • Internal low-frequency roll-of
  • Recessed low-cut filter switch for additional control
  • Smaller footprint
  • Superior Shure design and rugged, roadworthy construction

Medium Length Cartridge/Barrel Housing

  • Wider target aperture for greater degree of ambience (audience response, talk shows, live concerts)
  • Narrow pickup angle
  • Unmatch quality of off-axis rejection

SPECIFICATIONS

  • Cartridge Type: Electret Condenser
  • Polar Pattern: Hypercardioid/Lobar
  • Frequency Response: 140Hz - 20kHz
  • Output Impedance: 115 Ohms
  • Sensitivity (open circuit voltage @ 1kHz, typical): -33dBV/Pa (2.11mV)
  • Maximum SPL (1kHz at 1% THD): 2500 Ohm load = 132dB SPL // 1000 Ohm load: 128.5dB SPL
  • Signal-to-Noise Ratio: 79dB
  • Dynamic Range (at 1kHz): 2500 Ohm load = 117dB // 1000 Ohm load = 113.5dB
  • Clipping Level (at 1kHz, 1%THD): 2500 Ohms load = 4.0dBV // 1000 Ohms load = 1000 Ohms load = 0.0dBV
  • Self Noise (equivalent SPL, A-weighted, Typical): 15dB
  • Common Mode Rejection: 20Hz - 20kHz > 70dB
  • Low Frequency Filter Switch: --12dB / octave below specified frequency
  • Flat Response: 100Hz
  • Low Frequency Roll-off: 200Hz
  • Operating Temperature Range: 0 degrees F to 135 degrees F
  • Operating Relative Humidity: 0 to 95%
  • Polarity: Positive pressure on the diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Housing: Charcoal-gray metallic painted aluminum allow handle and grille with stainless steel screen
  • Power Requirements: 11 - 52VDC phantom power (IEC-61938), <2.0mA
  • Length: 9.41" 
  • Net Weight: 4.9 oz 

 

Windscreen Kit, VP89M
Shure A89MW-KIT Windscreen Kit, VP89M
Developed by Shure with Rycote, the A89LW-KIT Windshield Kit is the broadcast and media production professionals' choice when maximum isolation from wind and handling noise is required. Works with VP89L End-Address Shotgun Condenser ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Carry Case for the VP89M
Shure A89MC Carry Case for the VP89M
Carry Case for the VP89M 

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM