Community MX10-W
10" 2-Way Monitor in White - 200W RMS @ 8 Ohms

OUR PART #  MX10-W

Log In for price!

Don't have an account? Apply today!

Community's M-Class MX10 is a stylish and low profile floor monitor with excellent performance capabilities. Utilizing proprietary coaxial drivers to provide true point-source acoustical output, this compact monitor provides professional performance at an affordable price. Conical waveguides eliminate the transition anomalies that occur in most square and rectangular horns, resulting in exceptionally smooth phase and frequency response curves. Its coaxial design means that all of the sound emanates from the same point source. These innovations reduce eedback, improve intelligibility, and provide uniform coverage.

Note: Image shown is for illustrative purposes only. Actual product finish is WHITE .

The MX10 features high sensitivity, permitting the use of smaller power amplifiers to obtain very high output levels. Precision engineered internal crossovers eliminate the need for biamplification, further reducing the overall system cost. Characterized by a smooth, flat frequency response coupled with low distortion, the MX10 provides exceptional resistance to feedback. The Tru-Phase™ high frequency waveguide affords precision pattern control to avoid acoustic hot-spots on the stage, thereby greatly simplifying the task of the personnel who mix monitors.

Features:

  • Stylish, compact, and elegant appearance
  • Smooth conical dispersion for uniform stage coverage
  • Patented Carbon Ring Cone Technology™
  • Coaxial design provides flat frequency and phase response
  • Discreet single Ergo-Grip™ rear pocket handle for portability
  • Available in black or white finishes

Specifications:

  • Loudspeaker Type: Two-way, full-range coaxial floormonitor
  • Operating Range:
    • 70 Hz to 18 kHz
    • 90 Hz to 16 kHz (±4 dB)
  • Max Input Ratings (Passive): 200W continuous, 500Wprogram | 40 volts RMS, 89 volts momentary peak
  • Recommended Power Amplifier: 400W to 600W @ 8 ohms
  • Sensitivity (1W/1m): 99 dB SPL (125 Hz to 12.5 kHz 1/3octave bands) 99 dB SPL (250 Hz to 4 kHz speech range)
  • Maximum Output: 122 dB SPL / 129 dB SPL (peak)
  • Nominal Impedance: 8 ohms
  • Minimum Impedance: 5.6 ohms @ 200 Hz | Nominal –6dB
  • Beamwidth:
    • 100° H (+48º / -31º, 500 Hz to 6 kHz)
    • 100° V (+48º / -31º, 500 Hz to 6 kHz)
    • Axial Q / DI: 6.5 / 8.1, 500 Hz to 6 kHz
  • Crossover Frequency: 1 kHz
  • Recommended Signal
  • Processing: 80 Hz high pass filter
  • Drivers:
    • LF (1) 10" cone
    • HF (1) 1.25" exit
  • Driver Protection: DYNA-TECH™ driver protection system
  • Input Connection: (2) paralleled NL4-compatiblelocking connectors internally looped to one 2-terminal barrier strip
  • Enclosure: 11-ply cross-laminated birch
  • Handles: (1) Ergo-Grip™ rear pocket handle
  • Finish: Black or white paint finish
  • Grille: 16-gauge perforated steel
  • Required Accessories: 24 dB/Octave 90 Hz high passfilter
  • Supplied Accessories: (4) rubber feet with mountingscrews
  • Optional Accessories: MX-Y10B mounting yoke bracket,black MX-Y10W mounting yoke bracket, white
  • Dimenstions: 10.8" H x 12.6" W x 16.5" D
  • Weight: 22 lbs (10 kg)
Wall/Ceiling Yoke in White for MX10-W Loudspeaker
Community MX-Y10W Wall/Ceiling Yoke in White for MX10-W Loudspeaker
Community's MX-Y8 and MX-Y10 yoke brackets are designed to flush mount the M-Class series MX8 and MX10 loudspeakers in either a vertical or horizontal orientation tightly against a wall or ceiling. Corner mounting is also possible when the ...
Usually ships in 7-14 business days.
Need it sooner? Call us!

Community MX10-W
10" 2-Way Monitor in White - 200W RMS @ 8 Ohms

OUR PART #  MX10-W

Product Information:

Community's M-Class MX10 is a stylish and low profile floor monitor with excellent performance capabilities. Utilizing proprietary coaxial drivers to provide true point-source acoustical output, this compact monitor provides professional performance at an affordable price. Conical waveguides eliminate the transition anomalies that occur in most square and rectangular horns, resulting in exceptionally smooth phase and frequency response curves. Its coaxial design means that all of the sound emanates from the same point source. These innovations reduce eedback, improve intelligibility, and provide uniform coverage.

Note: Image shown is for illustrative purposes only. Actual product finish is WHITE .

The MX10 features high sensitivity, permitting the use of smaller power amplifiers to obtain very high output levels. Precision engineered internal crossovers eliminate the need for biamplification, further reducing the overall system cost. Characterized by a smooth, flat frequency response coupled with low distortion, the MX10 provides exceptional resistance to feedback. The Tru-Phase™ high frequency waveguide affords precision pattern control to avoid acoustic hot-spots on the stage, thereby greatly simplifying the task of the personnel who mix monitors.

Features:

  • Stylish, compact, and elegant appearance
  • Smooth conical dispersion for uniform stage coverage
  • Patented Carbon Ring Cone Technology™
  • Coaxial design provides flat frequency and phase response
  • Discreet single Ergo-Grip™ rear pocket handle for portability
  • Available in black or white finishes

Specifications:

  • Loudspeaker Type: Two-way, full-range coaxial floormonitor
  • Operating Range:
    • 70 Hz to 18 kHz
    • 90 Hz to 16 kHz (±4 dB)
  • Max Input Ratings (Passive): 200W continuous, 500Wprogram | 40 volts RMS, 89 volts momentary peak
  • Recommended Power Amplifier: 400W to 600W @ 8 ohms
  • Sensitivity (1W/1m): 99 dB SPL (125 Hz to 12.5 kHz 1/3octave bands) 99 dB SPL (250 Hz to 4 kHz speech range)
  • Maximum Output: 122 dB SPL / 129 dB SPL (peak)
  • Nominal Impedance: 8 ohms
  • Minimum Impedance: 5.6 ohms @ 200 Hz | Nominal –6dB
  • Beamwidth:
    • 100° H (+48º / -31º, 500 Hz to 6 kHz)
    • 100° V (+48º / -31º, 500 Hz to 6 kHz)
    • Axial Q / DI: 6.5 / 8.1, 500 Hz to 6 kHz
  • Crossover Frequency: 1 kHz
  • Recommended Signal
  • Processing: 80 Hz high pass filter
  • Drivers:
    • LF (1) 10" cone
    • HF (1) 1.25" exit
  • Driver Protection: DYNA-TECH™ driver protection system
  • Input Connection: (2) paralleled NL4-compatiblelocking connectors internally looped to one 2-terminal barrier strip
  • Enclosure: 11-ply cross-laminated birch
  • Handles: (1) Ergo-Grip™ rear pocket handle
  • Finish: Black or white paint finish
  • Grille: 16-gauge perforated steel
  • Required Accessories: 24 dB/Octave 90 Hz high passfilter
  • Supplied Accessories: (4) rubber feet with mountingscrews
  • Optional Accessories: MX-Y10B mounting yoke bracket,black MX-Y10W mounting yoke bracket, white
  • Dimenstions: 10.8" H x 12.6" W x 16.5" D
  • Weight: 22 lbs (10 kg)
Wall/Ceiling Yoke in White for MX10-W Loudspeaker
Community MX-Y10W Wall/Ceiling Yoke in White for MX10-W Loudspeaker
Community's MX-Y8 and MX-Y10 yoke brackets are designed to flush mount the M-Class series MX8 and MX10 loudspeakers in either a vertical or horizontal orientation tightly against a wall or ceiling. Corner mounting is also possible when the ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM