Electro-Voice RE97-2TX-BEIGE
Head Mic, w/TA4F

OUR PART #  RE97-2TX-BEIGE


The Electro-Voice® RE97-2Tx is a low profile, omni-directional, condenser microphone designed for demanding applications where a hands-free microphone is required. The RE97-2Tx is intended for spoken-word use in theatrical performance, corporate AV presentations, fixed installations, houses of worship, or any venue where a fullrange, natural, and well-balanced sound is required from an inconspicuous, lightweight, head-worn microphone.

The output of the RE97-2Tx is clean and accurate, while the omni-directional polar pattern ensures uniform output regardless of the microphone’s angle relative to the sound source. The RE97-2Tx head-band is easily adjusted to fit virtually any head size, is light in weight, and provides a stable base for the microphone boom. The microphone boom can be easily adjusted for optimum placement near the user’s mouth by sliding the boom forward and backward along the headband. The microphone boom is made of special, malleable stainless steel that may be shaped to better match facial contours. The earloops are designed for full 360° rotation, allowing for microphone usage on either side of the head, as well as convenient flat storage when not in use.

The supplied windscreen can be utilized in windy environments and to reduce breath noise. The RE97-2Tx has a shielded 4ft cable terminated in a genuine Switchcraft® TA4F connector and is ready for use with standard EV and Telex body-pack transmitters including the EV REV-BP, BPU-2/CSB-1000 and Telex WT-500/WT-1000. The wire to the body-pack may be conveniently routed behind the user and attached to a shirt collar with the included clothing clip.

Specifications:

  • Transducer: Condenser, back-electret
  • Frequency Response: 50 – 15 kHz
  • Polar Pattern: Omni-directional
  • Sensitivity, 1 kHz: -48 dBV, 4.0 mV/Pascal
  • Maximum SPL: >125 dB SPL
  • Equivalent Noise: 32 dBA
  • Dynamic Range: 93 dB
  • Output Impedance, 1 kHz: 3000 Ohms
  • Power Requirements: +5 VDC
  • Current Consumption: 310 µA
  • Polarity: Positive Pressure on
    Diaphragm Produces a
    Positive Voltage on pin 2
    Dimensions: See diagram
  • Cable: 4 ft (1.22 m) long; 0.052 in
    (1.30 mm) diameter
  • TA4F Connector Wiring: Pin 1 – Ground
    Pin 2 – Audio
    Pin 3 – Bias Voltage
    Pin 4 – Unused
  • Accessories Furnished: Windscreen
    Clothing Clip
    Gig Bag
  • Colors Available: Beige, Brown, Black
  • Net Weight: 0.6 oz (17 g)
    Mic and headset only: 0.33
    oz (9.4 g)
  • Optional Accessories: TXA Phantom Power
    Adapter

Electro-Voice RE97-2TX-BEIGE
Head Mic, w/TA4F

OUR PART #  RE97-2TX-BEIGE

Product Information:

The Electro-Voice® RE97-2Tx is a low profile, omni-directional, condenser microphone designed for demanding applications where a hands-free microphone is required. The RE97-2Tx is intended for spoken-word use in theatrical performance, corporate AV presentations, fixed installations, houses of worship, or any venue where a fullrange, natural, and well-balanced sound is required from an inconspicuous, lightweight, head-worn microphone.

The output of the RE97-2Tx is clean and accurate, while the omni-directional polar pattern ensures uniform output regardless of the microphone’s angle relative to the sound source. The RE97-2Tx head-band is easily adjusted to fit virtually any head size, is light in weight, and provides a stable base for the microphone boom. The microphone boom can be easily adjusted for optimum placement near the user’s mouth by sliding the boom forward and backward along the headband. The microphone boom is made of special, malleable stainless steel that may be shaped to better match facial contours. The earloops are designed for full 360° rotation, allowing for microphone usage on either side of the head, as well as convenient flat storage when not in use.

The supplied windscreen can be utilized in windy environments and to reduce breath noise. The RE97-2Tx has a shielded 4ft cable terminated in a genuine Switchcraft® TA4F connector and is ready for use with standard EV and Telex body-pack transmitters including the EV REV-BP, BPU-2/CSB-1000 and Telex WT-500/WT-1000. The wire to the body-pack may be conveniently routed behind the user and attached to a shirt collar with the included clothing clip.

Specifications:

  • Transducer: Condenser, back-electret
  • Frequency Response: 50 – 15 kHz
  • Polar Pattern: Omni-directional
  • Sensitivity, 1 kHz: -48 dBV, 4.0 mV/Pascal
  • Maximum SPL: >125 dB SPL
  • Equivalent Noise: 32 dBA
  • Dynamic Range: 93 dB
  • Output Impedance, 1 kHz: 3000 Ohms
  • Power Requirements: +5 VDC
  • Current Consumption: 310 µA
  • Polarity: Positive Pressure on
    Diaphragm Produces a
    Positive Voltage on pin 2
    Dimensions: See diagram
  • Cable: 4 ft (1.22 m) long; 0.052 in
    (1.30 mm) diameter
  • TA4F Connector Wiring: Pin 1 – Ground
    Pin 2 – Audio
    Pin 3 – Bias Voltage
    Pin 4 – Unused
  • Accessories Furnished: Windscreen
    Clothing Clip
    Gig Bag
  • Colors Available: Beige, Brown, Black
  • Net Weight: 0.6 oz (17 g)
    Mic and headset only: 0.33
    oz (9.4 g)
  • Optional Accessories: TXA Phantom Power
    Adapter
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM