Audix MG18-HC
Gooseneck Microphone, 18", Hypercardioid, Condenser

OUR PART #  MG18-HC

Log In for price!

Don't have an account? Apply today!

The MG12, MG15, and MG18 are professional miniature gooseneck condenser microphones designed for applications such as podium, presentation, meetings and teleconferencing. Known for their clarity, excellent sound quality and ease of operation, the MG12/15/18 have the ability to accurately capture and reproduce vocals from a comfortable distance.

The MG12/15/18 are characterized with a uniformly controlled cardioid polar pattern, helping to isolate the speaker from other ambient noise in the room or on the stage. The MG12/15/18 gooseneck mics are also available in a hypercardioid polar pattern for tighter pattern control. With a wide frequency range of 60Hz-19kHz, the MG12/15/18 provide natural sound with exceptional transient response.

The MG12/15/18 gooseneck system is equipped with a sophisticated dual preamp circuitry - one circuit located in the capsule housing and the other circuit built into the base of the XLR. This circuitry is internally balanced, insuring that the audio path will be isolated from hum and noise. In addition, the circuitry employs protection from RF and spurious emissions from cell phones and wireless GSM devices.

The goosenecks may be mounted with the supplied flange mount (TM1218) or with an optional base with an internal shockmount (SMT1218R). The mics may also be used on a standard mic stand or in conjunction with the Audix ATS-10 table stand with lighted on/off switch.

Manufactured with very high standards and tight tolerences, the MG12/15/18 features a machined brass body, field replaceable capsule, replaceable electronics, and a variety of optional accessories. The MG12/15/18 operate on phantom power of 18-52 volts and are available in non-reflective black matte finish.

Features

  • Natural accurate sound
  • Modular threaded capsule(s)
  • Low noise electronics, dual circuitry, internally balanced
  • RF immunity
  • Low profile design
  • Tension fit design for stable positioning

Specifications

  • Transducer Type: Pre-polarized condenser
  • Frequency Response: 60Hz-19kHz
  • Polar Pattern: Hypercardioid
  • Output Impedance: 150 ohms balanced
  • Sensitivity: 32mV/Pa @ 1k
  • Equivalent Noise Level: 22 dB (A weighted)
  • Signal to Noise Ratio: 72dB
  • Power Requirements: 18-52 volts phantom
  • Maximum SPL: >/=130dB
  • Dynamic Range: 108dB
  • Cable/Connector: 3-pin gold plated male XLR connector
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
  • Housing/Finish: Machined Brass/Black Matte
  • Weight: 4.73 oz
  • Overall Length: 22.4"
Desktop Stand for ADX12 & ADX18 Gooseneck Microphones
Audix ATS10 Desktop Stand for ADX12 & ADX18 Gooseneck Microphones
Audix's ATS10 is a heavy-duty, shock-absorbent tabletop stand for use with their ADX12 and ADX18 gooseneck microphones.
D Series Mic Clip
Audix DCLIP D Series Mic Clip
Heavy duty snap on clip with tension fit for D-Series, SCX series, ADX50 and TR40 microphones. Uses standard 5/8" threads and also includes a 3/8" thread adapter for European stands.
Phantom Power Supply, 2-Channel
Audix APS-2 Phantom Power Supply, 2-Channel
110V, switchable to 220. Detachable power cord.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Shockmount Adapter for Audix ADX212 & ADX218 for Permanent Installation, Rubber Insulated
Audix SMT-1218R Shockmount Adapter for Audix ADX212 & ADX218 for Permanent Installation, Rubber Insulated
Shockmount adapter for ADX212 & ADX218 for permanent installation.  Rubber insulated.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Audix MG18-HC
Gooseneck Microphone, 18", Hypercardioid, Condenser

OUR PART #  MG18-HC

Product Information:

The MG12, MG15, and MG18 are professional miniature gooseneck condenser microphones designed for applications such as podium, presentation, meetings and teleconferencing. Known for their clarity, excellent sound quality and ease of operation, the MG12/15/18 have the ability to accurately capture and reproduce vocals from a comfortable distance.

The MG12/15/18 are characterized with a uniformly controlled cardioid polar pattern, helping to isolate the speaker from other ambient noise in the room or on the stage. The MG12/15/18 gooseneck mics are also available in a hypercardioid polar pattern for tighter pattern control. With a wide frequency range of 60Hz-19kHz, the MG12/15/18 provide natural sound with exceptional transient response.

The MG12/15/18 gooseneck system is equipped with a sophisticated dual preamp circuitry - one circuit located in the capsule housing and the other circuit built into the base of the XLR. This circuitry is internally balanced, insuring that the audio path will be isolated from hum and noise. In addition, the circuitry employs protection from RF and spurious emissions from cell phones and wireless GSM devices.

The goosenecks may be mounted with the supplied flange mount (TM1218) or with an optional base with an internal shockmount (SMT1218R). The mics may also be used on a standard mic stand or in conjunction with the Audix ATS-10 table stand with lighted on/off switch.

Manufactured with very high standards and tight tolerences, the MG12/15/18 features a machined brass body, field replaceable capsule, replaceable electronics, and a variety of optional accessories. The MG12/15/18 operate on phantom power of 18-52 volts and are available in non-reflective black matte finish.

Features

  • Natural accurate sound
  • Modular threaded capsule(s)
  • Low noise electronics, dual circuitry, internally balanced
  • RF immunity
  • Low profile design
  • Tension fit design for stable positioning

Specifications

  • Transducer Type: Pre-polarized condenser
  • Frequency Response: 60Hz-19kHz
  • Polar Pattern: Hypercardioid
  • Output Impedance: 150 ohms balanced
  • Sensitivity: 32mV/Pa @ 1k
  • Equivalent Noise Level: 22 dB (A weighted)
  • Signal to Noise Ratio: 72dB
  • Power Requirements: 18-52 volts phantom
  • Maximum SPL: >/=130dB
  • Dynamic Range: 108dB
  • Cable/Connector: 3-pin gold plated male XLR connector
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
  • Housing/Finish: Machined Brass/Black Matte
  • Weight: 4.73 oz
  • Overall Length: 22.4"
Desktop Stand for ADX12 & ADX18 Gooseneck Microphones
Audix ATS10 Desktop Stand for ADX12 & ADX18 Gooseneck Microphones
Audix's ATS10 is a heavy-duty, shock-absorbent tabletop stand for use with their ADX12 and ADX18 gooseneck microphones.
D Series Mic Clip
Audix DCLIP D Series Mic Clip
Heavy duty snap on clip with tension fit for D-Series, SCX series, ADX50 and TR40 microphones. Uses standard 5/8" threads and also includes a 3/8" thread adapter for European stands.
Phantom Power Supply, 2-Channel
Audix APS-2 Phantom Power Supply, 2-Channel
110V, switchable to 220. Detachable power cord.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Shockmount Adapter for Audix ADX212 & ADX218 for Permanent Installation, Rubber Insulated
Audix SMT-1218R Shockmount Adapter for Audix ADX212 & ADX218 for Permanent Installation, Rubber Insulated
Shockmount adapter for ADX212 & ADX218 for permanent installation.  Rubber insulated.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.