JBL Control 67 HC/T
High Ceiling Pendant Speaker with Narrow 75° Coverage

OUR PART #  C67HC/T


The JBL Control Contractor 60 Series Pendant loudspeakers offer outstanding coverage for rooms with open architecture or high-ceilings and also provide excellent voice and music clarity for venues with difficult acoustics.  The proprietary conical Radiation Boundary Integrator combines a large diameter high-frequency waveguide with low-frequency projection apertures that work in tandem to provide an integration of coverage between the two coaxially-mounted drivers.  The result is even pattern control and coverage, where all listeners hear a consistent flat, frequency response. 

The Control 67 HC/T is an ultra-compact mid-high satelittle pendant speaker is great for speech and mid-high music applications.

JBL Control 67 HC/T Features:

  • Well-controlled 75 degree coverage for clarity in high-ceiling and reverberant locations
  • 6.5" (165mm) low-frequency with silk-dome tweeter for outstanding sonic fidelity
  • High 93 dB sensitivity
  • 75 Watts, 8 ohms and 60W multi-tap transformer
  • Black
  • Speaker comes with full grille

JBl Control 67 HC/T Specifications:

  • Frequency Response (-10 dB): 75 Hz – 17 kHz
  • Frequency Range (±3 dB): 110 Hz – 16 kHz
  • Power Capacity: 75 Watts Continuous Pink Noise Power (with 300 Watts peaks) 150 Watts Continuous Program Power
  • Nominal Sensitivity: 93 dB
  • Nominal Coverage Angle: 75° (+15°/-20°)
  • Directivity (Q): 10.4
  • Directivity Index (DI): 9.8 dB
  • Rated Maximum SPL @ 1m: 112 dB continuous pink noise,118 dB peak
  • Rated Impedance: 8 ohms
  • Transformer Taps:
    • 70V: 60W, 30W, 15W & 7.5W
    • 100V: 60W, 30W, 15W
  • Transformer Insertion Loss: 0.5 dB @ 7.5 W, 0.5 dB @ 15W, 0.6 dB @ 30 W, 0.7 dB @ 60 W
  • LF Driver: 165 mm (6.5") polypropylene-coatedpaper with pure butyl rubber surround, 25 mm (1") copper voice coil, vented fiberglass resin voice coil-former
  • HF Driver: 25 mm (1") textile soft-dome, neodymium magnet assembly, ferro-fluid cooling, aluminum voice coil former
  • Enclosure Material: High-impact polystyrene
  • Grille: Zinc-plated steel grille with powder-coatfinish, foam backing (removable for painting)
  • Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splashproof rating.
  • Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
  • Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m(15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire ropesuspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
  • Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 andUL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
  • Dimensions: 13.1" Dia. x 13.6" H (333 x 344 mm) height to top of cabinet.  14.5" (369 mm) to top of suspension bracket.
  • Net Weight (each): 13 lbs (5.9 kg)
  • Shipping Weight (pair): 31 lbs (14.1 kg)
  • Included Accessories: Two suspension cable systems (see "Suspension", above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.
  • Optional Accessories: MTC-PC60HC top panel / terminal cover

JBL Control 67 HC/T
High Ceiling Pendant Speaker with Narrow 75° Coverage

OUR PART #  C67HC/T

Product Information:

The JBL Control Contractor 60 Series Pendant loudspeakers offer outstanding coverage for rooms with open architecture or high-ceilings and also provide excellent voice and music clarity for venues with difficult acoustics.  The proprietary conical Radiation Boundary Integrator combines a large diameter high-frequency waveguide with low-frequency projection apertures that work in tandem to provide an integration of coverage between the two coaxially-mounted drivers.  The result is even pattern control and coverage, where all listeners hear a consistent flat, frequency response. 

The Control 67 HC/T is an ultra-compact mid-high satelittle pendant speaker is great for speech and mid-high music applications.

JBL Control 67 HC/T Features:

  • Well-controlled 75 degree coverage for clarity in high-ceiling and reverberant locations
  • 6.5" (165mm) low-frequency with silk-dome tweeter for outstanding sonic fidelity
  • High 93 dB sensitivity
  • 75 Watts, 8 ohms and 60W multi-tap transformer
  • Black
  • Speaker comes with full grille

JBl Control 67 HC/T Specifications:

  • Frequency Response (-10 dB): 75 Hz – 17 kHz
  • Frequency Range (±3 dB): 110 Hz – 16 kHz
  • Power Capacity: 75 Watts Continuous Pink Noise Power (with 300 Watts peaks) 150 Watts Continuous Program Power
  • Nominal Sensitivity: 93 dB
  • Nominal Coverage Angle: 75° (+15°/-20°)
  • Directivity (Q): 10.4
  • Directivity Index (DI): 9.8 dB
  • Rated Maximum SPL @ 1m: 112 dB continuous pink noise,118 dB peak
  • Rated Impedance: 8 ohms
  • Transformer Taps:
    • 70V: 60W, 30W, 15W & 7.5W
    • 100V: 60W, 30W, 15W
  • Transformer Insertion Loss: 0.5 dB @ 7.5 W, 0.5 dB @ 15W, 0.6 dB @ 30 W, 0.7 dB @ 60 W
  • LF Driver: 165 mm (6.5") polypropylene-coatedpaper with pure butyl rubber surround, 25 mm (1") copper voice coil, vented fiberglass resin voice coil-former
  • HF Driver: 25 mm (1") textile soft-dome, neodymium magnet assembly, ferro-fluid cooling, aluminum voice coil former
  • Enclosure Material: High-impact polystyrene
  • Grille: Zinc-plated steel grille with powder-coatfinish, foam backing (removable for painting)
  • Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splashproof rating.
  • Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
  • Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m(15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire ropesuspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
  • Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 andUL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
  • Dimensions: 13.1" Dia. x 13.6" H (333 x 344 mm) height to top of cabinet.  14.5" (369 mm) to top of suspension bracket.
  • Net Weight (each): 13 lbs (5.9 kg)
  • Shipping Weight (pair): 31 lbs (14.1 kg)
  • Included Accessories: Two suspension cable systems (see "Suspension", above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.
  • Optional Accessories: MTC-PC60HC top panel / terminal cover
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM