Radial Engineering EXTC
500 Series Guitar Effects Interface

OUR PART #  EXTC


Radial Engineering's EXTC is an effects loop processor that converts +4dB balanced signals to HI-Z guitar effects pedals and then reconverts them back so that they can easily be manipulated in the pro-audio environment. The EXTC begins with separate send and receive controls that enable the engineer to adjust levels as needed. These are supplemented with a mix/blend control that allows the original signal to be blended with effects to achieve the perfect balance. This is particularly important with bass as most guitar effects are focused in the mid range which invariably cut off the important bass frequencies when processed. One merely adjusts the mix between wet and dry signals for amazing results. An important feature on the EXTC is the 180º polarity reverse. Most folks do not realize that guitar pedals often reverse the phase of the signal as it passes through the effect. This is only noticed when combining dry and wet signals when they cancel each other out. The phase reverse function solves the problem by inverting the polarity and brings both the wet and dry signals back into absolute phase. The EXTC’s Omniport™ is configured to work with a traditional patchbay using a TRS tip-send and ring-return format. This enables the EXTC to quickly be patched into any signal path as needed.

500 Series 10-Slot Rackmount Chassis
Radial Engineering Powerhouse 500 Series 10-Slot Rackmount Chassis
Features: 10-slot design for maximum densityIndividual XLR & 1/4" TRS I/O on each slotEasy-Glide module alignment trayInnovative feed and link functionsRadial Engineering's Powerhouse is a 10-module 500 series power-rack designed to ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
500 Series 6-Slot Desktop Power Rack
Radial Engineering SixPack 500 Series 6-Slot Desktop Power Rack
The Radial Engineering SixPack is a desktop power rack for 500 series modules that lets you mix and match up to six modules and safely power them to create a stereo channel strip or unique signal chain.The design begins with a heavy 14 ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
12 Thumb Screws
Radial Engineering Thumb Set 12 Thumb Screws
This set of 12 thumb screws from Radial Engineering is designed for securing your 500 Series modules into a Radial enclosure.Radial Engineering Part #: R700 9100

Usually ships in 7-14 business days.
Need it sooner? Call us!

Radial Engineering EXTC
500 Series Guitar Effects Interface

OUR PART #  EXTC

Product Information:

Radial Engineering's EXTC is an effects loop processor that converts +4dB balanced signals to HI-Z guitar effects pedals and then reconverts them back so that they can easily be manipulated in the pro-audio environment. The EXTC begins with separate send and receive controls that enable the engineer to adjust levels as needed. These are supplemented with a mix/blend control that allows the original signal to be blended with effects to achieve the perfect balance. This is particularly important with bass as most guitar effects are focused in the mid range which invariably cut off the important bass frequencies when processed. One merely adjusts the mix between wet and dry signals for amazing results. An important feature on the EXTC is the 180º polarity reverse. Most folks do not realize that guitar pedals often reverse the phase of the signal as it passes through the effect. This is only noticed when combining dry and wet signals when they cancel each other out. The phase reverse function solves the problem by inverting the polarity and brings both the wet and dry signals back into absolute phase. The EXTC’s Omniport™ is configured to work with a traditional patchbay using a TRS tip-send and ring-return format. This enables the EXTC to quickly be patched into any signal path as needed.

500 Series 10-Slot Rackmount Chassis
Radial Engineering Powerhouse 500 Series 10-Slot Rackmount Chassis
Features: 10-slot design for maximum densityIndividual XLR & 1/4" TRS I/O on each slotEasy-Glide module alignment trayInnovative feed and link functionsRadial Engineering's Powerhouse is a 10-module 500 series power-rack designed to ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
500 Series 6-Slot Desktop Power Rack
Radial Engineering SixPack 500 Series 6-Slot Desktop Power Rack
The Radial Engineering SixPack is a desktop power rack for 500 series modules that lets you mix and match up to six modules and safely power them to create a stereo channel strip or unique signal chain.The design begins with a heavy 14 ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
12 Thumb Screws
Radial Engineering Thumb Set 12 Thumb Screws
This set of 12 thumb screws from Radial Engineering is designed for securing your 500 Series modules into a Radial enclosure.Radial Engineering Part #: R700 9100

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM