Audix F2
Dynamic Microphone, Hypercardioid

OUR PART #  F2


Designed, assembled and tested by Audix in the USA, the f2 is a dynamic instrument microphone used for stage and studio applications. The f2 is characterized with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a LM (Low Mass) diaphragm for natural, accurate sound reproduction.

The f2 is lightweight, compact and easy to position. With a wide frequency response of 52Hz-15kHz and the ability to handle sound pressure levels of 139dB, the f2 is an excellent choice for micing instruments with a percussive nature such as rack toms, congas, saxophone, guitar cabinets and brass.

Roadworthy construction includes a precision cast zinc alloy body, black coat finish, laser etched model and serial number, steel mesh grill, gold XRL connector and a tension-fit heavy duty nylon mic clip.

Transformerless design, low impedance and balanced output allow for interference-free performance even with long cable runs.

Features

  • Compact, lightweight
  • Cast zinc alloy body
  • LM (Low mass) diaphragm
  • Studio quality sound
  • Excellent mid-bass transient response
  • Handles high SPL without distortion
  • Roadworthy construction
  • 3 year warranty

Applications

  • Rack toms
  • Congas
  • Floor tom
  • Guitar & bass cabinets
  • Saxophone
  • Brass

Specifications

  • Transducer Type: Dynamic
  • Frequency Response: 52Hz-15kHz
  • Polar Pattern: Hypercardioid
  • Output Impedance: 580 ohms
  • Sensitivity: 2 mV/Pa @ 1k
  • Capsule Technology: LM Type A
  • Off Axis Rejection: >20dB
  • Maximum SPL: >/=139dB
  • Connector: 3-pin gold plated male XLR connector
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Housing/Finish: Cast zinc alloy/black coat
  • Weight: 8.7 oz
  • Length: 4.09"
Mic Mounting System
Audix CABGRABBER-XL Mic Mounting System
Compact mic clamp for large guitar amps and bass cabinets. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mic Clamp for Guitar Amps & Cabinets
Audix CabGrabber Mic Clamp for Guitar Amps & Cabinets
The CabGrabber™ (model no. CABGRAB1) from Audix is a compact microphone holder that clamps on to most combo amps or cabinets between 8"-14" in depth. Can be used with any microphone weighing up to 1 lb.Audix CabGrabber Features: An ...
Gooseneck Clip Mount for Drum Microphones
Audix DVICE Gooseneck Clip Mount for Drum Microphones
Audix's DVICE is a gooseneck clip designed primarily for use on drums.  Works with D series, Micro D series, and most other mics.  Will work with all other mic clips using a 5/8" thread.  Included with all D series drum ...
Drum Attachment
Audix DFLEX Drum Attachment
The D-FLEX is a gooseneck drum attachment for mounting Audix D-series instrument & drum microphones to drums or amplifiers. The flexibility of its design allows for a variety of mounting positions and angles (dual pivot ...
5" Microphone Stand
Audix Tripod 5" Microphone Stand
Convenient 5" tripod stand for a variety of miking applications.  Works with any standard 5/8" microphone clip. 

Usually ships in 7-14 business days.
Need it sooner? Call us!

Audix F2
Dynamic Microphone, Hypercardioid

OUR PART #  F2

Product Information:

Designed, assembled and tested by Audix in the USA, the f2 is a dynamic instrument microphone used for stage and studio applications. The f2 is characterized with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a LM (Low Mass) diaphragm for natural, accurate sound reproduction.

The f2 is lightweight, compact and easy to position. With a wide frequency response of 52Hz-15kHz and the ability to handle sound pressure levels of 139dB, the f2 is an excellent choice for micing instruments with a percussive nature such as rack toms, congas, saxophone, guitar cabinets and brass.

Roadworthy construction includes a precision cast zinc alloy body, black coat finish, laser etched model and serial number, steel mesh grill, gold XRL connector and a tension-fit heavy duty nylon mic clip.

Transformerless design, low impedance and balanced output allow for interference-free performance even with long cable runs.

Features

  • Compact, lightweight
  • Cast zinc alloy body
  • LM (Low mass) diaphragm
  • Studio quality sound
  • Excellent mid-bass transient response
  • Handles high SPL without distortion
  • Roadworthy construction
  • 3 year warranty

Applications

  • Rack toms
  • Congas
  • Floor tom
  • Guitar & bass cabinets
  • Saxophone
  • Brass

Specifications

  • Transducer Type: Dynamic
  • Frequency Response: 52Hz-15kHz
  • Polar Pattern: Hypercardioid
  • Output Impedance: 580 ohms
  • Sensitivity: 2 mV/Pa @ 1k
  • Capsule Technology: LM Type A
  • Off Axis Rejection: >20dB
  • Maximum SPL: >/=139dB
  • Connector: 3-pin gold plated male XLR connector
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Housing/Finish: Cast zinc alloy/black coat
  • Weight: 8.7 oz
  • Length: 4.09"
Mic Mounting System
Audix CABGRABBER-XL Mic Mounting System
Compact mic clamp for large guitar amps and bass cabinets. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mic Clamp for Guitar Amps & Cabinets
Audix CabGrabber Mic Clamp for Guitar Amps & Cabinets
The CabGrabber™ (model no. CABGRAB1) from Audix is a compact microphone holder that clamps on to most combo amps or cabinets between 8"-14" in depth. Can be used with any microphone weighing up to 1 lb.Audix CabGrabber Features: An ...
Gooseneck Clip Mount for Drum Microphones
Audix DVICE Gooseneck Clip Mount for Drum Microphones
Audix's DVICE is a gooseneck clip designed primarily for use on drums.  Works with D series, Micro D series, and most other mics.  Will work with all other mic clips using a 5/8" thread.  Included with all D series drum ...
Drum Attachment
Audix DFLEX Drum Attachment
The D-FLEX is a gooseneck drum attachment for mounting Audix D-series instrument & drum microphones to drums or amplifiers. The flexibility of its design allows for a variety of mounting positions and angles (dual pivot ...
5" Microphone Stand
Audix Tripod 5" Microphone Stand
Convenient 5" tripod stand for a variety of miking applications.  Works with any standard 5/8" microphone clip. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM