Radio Design Labs EZ-HSX4
Stereo Switcher with Headphone Amplifier

OUR PART #  EZ-HSX4


Radio Design Labs' EZ-HSX4 is a stereo audio source selector with an output volume control. Line-level and headphone outputs are provided. This unit is ideal as a four input headphone amplifier and as a source selector feeding an associated audio amplifier.

The EZ-HSX4 is used in stores, houses of worship, studios, sound booths, home component systems and commercial sound systems.

Features:

  • Radio Design Labs' PS-24AS power supply is included
  • Unbalanced Stereo Audio Inputs and Output
  • Inputs and Line Output on Rear-Panel RCA Jacks
  • Four Input Source Selection
  • Line Output Switchable Fixed (Unity Gain) or Variable
  • Variable Output Follows Front-Panel Level Control
  • Headphone Output on 1/4" (6.3 mm) and MINI Jacks
  • Headphone Output Follows Front-Panel Level Control
  • Full-Size Interlocking Pushbuttons on Front Panel

Specifications:

  • Inputs (4): Stereo on dual RCA jacks, > 10 kO, -10 dBV nominal, +10 dBV max.
  • Level control: Off to +12 dB gain
  • Outputs (3): Stereo on dual RCA jacks (line level, -10 dBV nominal, +10 dBV max. fixed, +17 dBV max. variable), 1/4” (6.3 mm) TRS or Mini jack (2 headphone, 35 mW, 100 O load)
  • Frequency Response: 10 Hz to 20 kHz (line output ±0.05 dB, headphone output ±1.25 dB, 100 O load)
  • THD+N: < 0.03% (line output), < 0.1% (headphone output, 10 mW, 100 O load)
  • Crosstalk: < -70 dB (1 kHz)
  • Noise: < -100 dB (headphone, below 10 mW output, 100 O load)
  • Noise: < -80 dB (variable output, below -10 dBV, unity gain), < -95 dB (fixed output, below -10 dBV)
  • 24 Vdc power supply current: 40 mA (idle), 50 mA (max.)
  • Case dimensions: 5.75" W x 5" D (14.6 x 12.7 cm)
  • Mounting size: 1/3 rack width
Surface Mount Bezel 1/3 Rack
Radio Design Labs EZ-SMB2 Surface Mount Bezel 1/3 Rack
Surface mount bezel for 1/3 rack width EZ products.
24 VDC 500mA Switching Power Supply, North American Model
Radio Design Labs PS-24AS 24 VDC 500mA Switching Power Supply, North American Model
Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
Under Counter Bracket
Radio Design Labs EZ-UCB2 Under Counter Bracket
The Radio Design Labs EZ-UCB2 is a under counter bracket pair for all EZ product widths.Radio Design Labs EZ-UCB2 Features: Brackets Snap on EZ Case for Easy Alignment EZ Product Secures Quickly Using Two Screws Brackets Fasten to ...

4.0 / 5

★★★★★ Log In for price!

In Stock
Component Chasis, 6 x 1/6 RU
Radio Design Labs EZ-CC6 Component Chasis, 6 x 1/6 RU
Component Chassis for 6 Increments of 1/6 Rack WidthFeatures: Mounts All EZ A/V Products Mounts EZ Storage Drawers Cover Lifts Off for Easy Product Mounting Integral Heavy-Duty Non-Skid Rubber Feet

Usually ships in 7-14 business days.
Need it sooner? Call us!
Rack Adapter
Radio Design Labs EZ-RA6 Rack Adapter
Rack Adapter for 6 Increments of 1/6 Rack Width Mounts All EZ A/V Products Mounts EZ Storage Drawers Base Plate Slides Out for Easy Product Mounting Occupies One RU in Standard 19¨ Rack

Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Chassis 1/3 Rack
Radio Design Labs EZ-DC2 Desktop Chassis 1/3 Rack
Desktop Chassis for 1/3 Rack Width EZ Products Mounts 1/3 Width EZ Product to Desktop Installs Quickly With Two Screws Covers Cable Port in Desktop Provides Space for Excess Wire

Usually ships in 7-14 business days.
Need it sooner? Call us!
1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
Radio Design Labs EZ-SD1 1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
RDL's EZ-SD1 is a 1/6 rack width storage drawer designed to mount in RDL's EZ-CC6 or EZ-RA6 rack adapters. The drawer holds adapters and cables and can be used in place of filler panels.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Filler Panel, 1/6RU
Radio Design Labs EZ-FP1 Filler Panel, 1/6RU
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Click to download

Radio Design Labs EZ-HSX4
Stereo Switcher with Headphone Amplifier

OUR PART #  EZ-HSX4

Product Information:

Radio Design Labs' EZ-HSX4 is a stereo audio source selector with an output volume control. Line-level and headphone outputs are provided. This unit is ideal as a four input headphone amplifier and as a source selector feeding an associated audio amplifier.

The EZ-HSX4 is used in stores, houses of worship, studios, sound booths, home component systems and commercial sound systems.

Features:

  • Radio Design Labs' PS-24AS power supply is included
  • Unbalanced Stereo Audio Inputs and Output
  • Inputs and Line Output on Rear-Panel RCA Jacks
  • Four Input Source Selection
  • Line Output Switchable Fixed (Unity Gain) or Variable
  • Variable Output Follows Front-Panel Level Control
  • Headphone Output on 1/4" (6.3 mm) and MINI Jacks
  • Headphone Output Follows Front-Panel Level Control
  • Full-Size Interlocking Pushbuttons on Front Panel

Specifications:

  • Inputs (4): Stereo on dual RCA jacks, > 10 kO, -10 dBV nominal, +10 dBV max.
  • Level control: Off to +12 dB gain
  • Outputs (3): Stereo on dual RCA jacks (line level, -10 dBV nominal, +10 dBV max. fixed, +17 dBV max. variable), 1/4” (6.3 mm) TRS or Mini jack (2 headphone, 35 mW, 100 O load)
  • Frequency Response: 10 Hz to 20 kHz (line output ±0.05 dB, headphone output ±1.25 dB, 100 O load)
  • THD+N: < 0.03% (line output), < 0.1% (headphone output, 10 mW, 100 O load)
  • Crosstalk: < -70 dB (1 kHz)
  • Noise: < -100 dB (headphone, below 10 mW output, 100 O load)
  • Noise: < -80 dB (variable output, below -10 dBV, unity gain), < -95 dB (fixed output, below -10 dBV)
  • 24 Vdc power supply current: 40 mA (idle), 50 mA (max.)
  • Case dimensions: 5.75" W x 5" D (14.6 x 12.7 cm)
  • Mounting size: 1/3 rack width
Surface Mount Bezel 1/3 Rack
Radio Design Labs EZ-SMB2 Surface Mount Bezel 1/3 Rack
Surface mount bezel for 1/3 rack width EZ products.
24 VDC 500mA Switching Power Supply, North American Model
Radio Design Labs PS-24AS 24 VDC 500mA Switching Power Supply, North American Model
Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
Under Counter Bracket
Radio Design Labs EZ-UCB2 Under Counter Bracket
The Radio Design Labs EZ-UCB2 is a under counter bracket pair for all EZ product widths.Radio Design Labs EZ-UCB2 Features: Brackets Snap on EZ Case for Easy Alignment EZ Product Secures Quickly Using Two Screws Brackets Fasten to ...

4.0 / 5

★★★★★ Log In for price!

In Stock
Component Chasis, 6 x 1/6 RU
Radio Design Labs EZ-CC6 Component Chasis, 6 x 1/6 RU
Component Chassis for 6 Increments of 1/6 Rack WidthFeatures: Mounts All EZ A/V Products Mounts EZ Storage Drawers Cover Lifts Off for Easy Product Mounting Integral Heavy-Duty Non-Skid Rubber Feet

Usually ships in 7-14 business days.
Need it sooner? Call us!
Rack Adapter
Radio Design Labs EZ-RA6 Rack Adapter
Rack Adapter for 6 Increments of 1/6 Rack Width Mounts All EZ A/V Products Mounts EZ Storage Drawers Base Plate Slides Out for Easy Product Mounting Occupies One RU in Standard 19¨ Rack

Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Chassis 1/3 Rack
Radio Design Labs EZ-DC2 Desktop Chassis 1/3 Rack
Desktop Chassis for 1/3 Rack Width EZ Products Mounts 1/3 Width EZ Product to Desktop Installs Quickly With Two Screws Covers Cable Port in Desktop Provides Space for Excess Wire

Usually ships in 7-14 business days.
Need it sooner? Call us!
1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
Radio Design Labs EZ-SD1 1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
RDL's EZ-SD1 is a 1/6 rack width storage drawer designed to mount in RDL's EZ-CC6 or EZ-RA6 rack adapters. The drawer holds adapters and cables and can be used in place of filler panels.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Filler Panel, 1/6RU
Radio Design Labs EZ-FP1 Filler Panel, 1/6RU
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM