Audio Technologies Inc. DDA-106XLR
Distribution Amp, Digital, 1x6, XLR, AES/EBU

OUR PART #  DDA-106XLR


The Audio Technologies Inc Series 2 Digital Audio Distribution Amplifiers give you new features and flexibility. Now you can distribute digital audio at up to 192kHz sample rates with incredibly low jitter and ultra-short propagation delay. Switchable inputs let you choose from multiple input streams. Selectable reclocking lets you precisely regenerate a pristine input signal or handle Surround-encoded audio. Sample Rate, Word Length, Fault Diagnostic and Pro/Consumer displays tell you your audio is clean or let you know why it's not. Push-button input EQ optimizes for long input cables. Loop-thru connectors let you stack units for even more outputs or seamlessly insert a DA into your digital workflow.

Audio Technologies Inc DDA-106XLR Features

  • Sample rates from 27 to 192kHz
  • Word Lengths from 16 to 24 bit
  • Lowest jitter, <300 picoseconds
  • Propegation delay <25 nanoseconds
  • Selectable Re-clocking, Surround capable
  • Loop-thru inputs with switched termination
  • Input sample rate indicators
  • Input word length indicators
  • Fault diagnostic indicators
  • Pro/Consumer Mode indicator
  • Automatic Input EQ for long line lengths
  • Front Panel Lockout

Input:

  • Connectors: XLR female; paralleled input connectors for loop-thru expansion
  • Level: 0.2Vp-p minimum
  • Impedance: Transformer isolated, balanced and floating, 110 ohms; terminating resistors may be switched in or out via front panel control
  • Sampling Frequency: 27 to 192kHz
  • Cable Length: >1000 feet of 110 ohm cable with equalizer; 75 ohm coax allows longer runs
  • Equalizer: Automatic EQ for long lines via front panel push button
  • Clock: Regenerated from input signal with dual mode PLL or non-relocked to preserve Surround coding; switchable

Outputs:

  • Connectors: 6 XLR male
  • Level: 4Vp-p loaded
  • Impedance: 110 ohms, balanced and transformer isolated
  • Output Jitter: <0.3 nanoseconds peak to peak
  • Propagation Delay: <25 nanoseconds

Indicators:

  • Input Termination: On, Off
  • Input Sample Rate: 32, 44.1, 48, 88.2, 96, 176.4, and 192 kHz
  • Input Word Length: 16, 18, 20 and 24 bits
  • Input Digital Errors: Bi-Phase/Parity, Validity, Non-Linear PCM, DTS-CD Signal
  • Re-Clocking: Off, On
  • Mode: Pro, Consumer
  • Input Cable EQ: Locked, Enabled
  • Input Select: 1, 2
  • Power: LED follows power transformer and full wave bridge

Audio Technologies Inc DDA-106XLR Specifications:

  • Power: Internal Supply, 115/230 VAC (selectable via internal jumper) +/-10%, 50/60Hz, 10VA, IEC320 3-pin connector
  • Size: 19" W x 1.75" H x 8.5" D; 1RU package
  • Weight: 7 lbs net; 9 lbs shipping
  • Warranty: Limited, one year warranty

Audio Technologies Inc. DDA-106XLR
Distribution Amp, Digital, 1x6, XLR, AES/EBU

OUR PART #  DDA-106XLR

Product Information:

The Audio Technologies Inc Series 2 Digital Audio Distribution Amplifiers give you new features and flexibility. Now you can distribute digital audio at up to 192kHz sample rates with incredibly low jitter and ultra-short propagation delay. Switchable inputs let you choose from multiple input streams. Selectable reclocking lets you precisely regenerate a pristine input signal or handle Surround-encoded audio. Sample Rate, Word Length, Fault Diagnostic and Pro/Consumer displays tell you your audio is clean or let you know why it's not. Push-button input EQ optimizes for long input cables. Loop-thru connectors let you stack units for even more outputs or seamlessly insert a DA into your digital workflow.

Audio Technologies Inc DDA-106XLR Features

  • Sample rates from 27 to 192kHz
  • Word Lengths from 16 to 24 bit
  • Lowest jitter, <300 picoseconds
  • Propegation delay <25 nanoseconds
  • Selectable Re-clocking, Surround capable
  • Loop-thru inputs with switched termination
  • Input sample rate indicators
  • Input word length indicators
  • Fault diagnostic indicators
  • Pro/Consumer Mode indicator
  • Automatic Input EQ for long line lengths
  • Front Panel Lockout

Input:

  • Connectors: XLR female; paralleled input connectors for loop-thru expansion
  • Level: 0.2Vp-p minimum
  • Impedance: Transformer isolated, balanced and floating, 110 ohms; terminating resistors may be switched in or out via front panel control
  • Sampling Frequency: 27 to 192kHz
  • Cable Length: >1000 feet of 110 ohm cable with equalizer; 75 ohm coax allows longer runs
  • Equalizer: Automatic EQ for long lines via front panel push button
  • Clock: Regenerated from input signal with dual mode PLL or non-relocked to preserve Surround coding; switchable

Outputs:

  • Connectors: 6 XLR male
  • Level: 4Vp-p loaded
  • Impedance: 110 ohms, balanced and transformer isolated
  • Output Jitter: <0.3 nanoseconds peak to peak
  • Propagation Delay: <25 nanoseconds

Indicators:

  • Input Termination: On, Off
  • Input Sample Rate: 32, 44.1, 48, 88.2, 96, 176.4, and 192 kHz
  • Input Word Length: 16, 18, 20 and 24 bits
  • Input Digital Errors: Bi-Phase/Parity, Validity, Non-Linear PCM, DTS-CD Signal
  • Re-Clocking: Off, On
  • Mode: Pro, Consumer
  • Input Cable EQ: Locked, Enabled
  • Input Select: 1, 2
  • Power: LED follows power transformer and full wave bridge

Audio Technologies Inc DDA-106XLR Specifications:

  • Power: Internal Supply, 115/230 VAC (selectable via internal jumper) +/-10%, 50/60Hz, 10VA, IEC320 3-pin connector
  • Size: 19" W x 1.75" H x 8.5" D; 1RU package
  • Weight: 7 lbs net; 9 lbs shipping
  • Warranty: Limited, one year warranty
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM