Radio Design Labs D-CIJ3
Consumer Input Jacks, RCA

OUR PART #  D-CIJ3


The D-CIJ3 is the perfect choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line.

The D-CIJ3 is a complete unbalanced line-level audio input module. The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for mono or stereo consumer level sources. An input signal may be connected to either the phono jacks or to the mini-jack. The left and right signal inputs are combined and balanced through audio transformers configured to reject induced hum. A mono line-level output is provided on the rear panel detachable terminal block for connection to a 10 kO or higher input impedance line-level module or equipment input.

Features:

  • Stereo Inputs to Mono Output
  • Stereo Inputs on RCA Jacks and Stereo Mini-Jack
  • Line-Level Output to Feed 10 kO Equipment Inputs
  • Output Connections on Detachable Terminal Block
  • Mix Stereo Inputs to Mono Balanced
  • Unbalanced to Balanced Conversion Without Gain
  • Transformer Isolation for Unbalanced Line Inputs
  • Hum Cancellation on Unbalanced Line Inputs
  • Available in RDL White/Gray (D-CIJ3)

Specifications:

  • Input connectors (3): Phono jacks with gold contacts (Left and Right), Mini-jack 3.5 mm (Stereo)
  • Frequency response (line level): 50 Hz to 20 kHz (±1 dB); 30 Hz to 20 kHz (±2 dB)
  • THD: <0.2% (1 kHz)
  • Output connector: Detachable terminal block
  • Dimensions:
    Height: 4.13 in. 10.49 cm
    Width: 1.7 in. 4.32 cm
    Depth: 2.15 in. 5.47 cm
  • Mounting Box Minimum Dimensions:
    Width: 1.80 in. 4.57 cm
    Depth: 1.75 in. 4.45 cm
  • Ambient Operating Environment: 0° C to 55° C
testtesttesttesttesttesttesttesttesttesttesttest
3RU Rack Panel Mount for 9 Decora Models
Radio Design Labs RM-D9 3RU Rack Panel Mount for 9 Decora Models
Radio Design Labs' RM-D9 is a 3 RU rack panel that allows the mounting of 9 Decora products, such as RDL remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens.The ...
Single-Gang Universal Wall Box
Radio Design Labs WB-1U Single-Gang Universal Wall Box
Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
Wall Plate, Single Cover Plate, White
Radio Design Labs CP1-W Wall Plate, Single Cover Plate, White
For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-1U Universal Wall Box.
Single Gang Decora Cover Plate in Stainless Steel
Radio Design Labs CP-1S Single Gang Decora Cover Plate in Stainless Steel
The Radio Design Labs CP-1S is a single gang decora cover plate in stainless steel.Dimensions: 4.55" H x 2.8" W (11.6 x 7.1 cm)Package Dimensions: 2" x 3"Shipping Weight: 0.072 lbs
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)
Radio Design Labs DC-4G Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)
Radio Design Labs' DC-4G desktop chassis holds four Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount to ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Wall Mount Chasis for Decora
Radio Design Labs DC-2G Wall Mount Chasis for Decora
The DC-2G desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desk Top Chassis for Decora, White
Radio Design Labs DC-2W Desk Top Chassis for Decora, White
The DC-2W white desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
1RU Rack Panel Mount for 3 Decora Models
Radio Design Labs RM-D3 1RU Rack Panel Mount for 3 Decora Models
Radio Design Labs' RM-D3 is a 1 RU rack panel that allows the mounting of 3 Decora products, such as RDL® remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens. The ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Wall Mount Chasis for Decora
Radio Design Labs DC-1G Wall Mount Chasis for Decora
The DC-1G desktop chassis holds one Decora®-style product, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a vertical ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Dual-Gang Universal Wall Box
Radio Design Labs WB-2U Dual-Gang Universal Wall Box
Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Double Cover Plate/Gray
Radio Design Labs CP-2/G Double Cover Plate/Gray
For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-2U Universal Wall Box. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
Single-Gang Gray Wall Plate for SMB-1, DC-1, WB-1U, Decora-Style Products
Radio Design Labs CP-1/G Single-Gang Gray Wall Plate for SMB-1, DC-1, WB-1U, Decora-Style Products
Radio Design Labs' CP-1G is for use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels.  Compatible with Decora style products and American electrical boxes.Height: 4.55" (11.6 cm)Width: 2.80" (7.1 cm)
Usually ships in 7-14 business days.
Need it sooner? Call us!

Radio Design Labs D-CIJ3
Consumer Input Jacks, RCA

OUR PART #  D-CIJ3

Product Information:

The D-CIJ3 is the perfect choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line.

The D-CIJ3 is a complete unbalanced line-level audio input module. The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for mono or stereo consumer level sources. An input signal may be connected to either the phono jacks or to the mini-jack. The left and right signal inputs are combined and balanced through audio transformers configured to reject induced hum. A mono line-level output is provided on the rear panel detachable terminal block for connection to a 10 kO or higher input impedance line-level module or equipment input.

Features:

  • Stereo Inputs to Mono Output
  • Stereo Inputs on RCA Jacks and Stereo Mini-Jack
  • Line-Level Output to Feed 10 kO Equipment Inputs
  • Output Connections on Detachable Terminal Block
  • Mix Stereo Inputs to Mono Balanced
  • Unbalanced to Balanced Conversion Without Gain
  • Transformer Isolation for Unbalanced Line Inputs
  • Hum Cancellation on Unbalanced Line Inputs
  • Available in RDL White/Gray (D-CIJ3)

Specifications:

  • Input connectors (3): Phono jacks with gold contacts (Left and Right), Mini-jack 3.5 mm (Stereo)
  • Frequency response (line level): 50 Hz to 20 kHz (±1 dB); 30 Hz to 20 kHz (±2 dB)
  • THD: <0.2% (1 kHz)
  • Output connector: Detachable terminal block
  • Dimensions:
    Height: 4.13 in. 10.49 cm
    Width: 1.7 in. 4.32 cm
    Depth: 2.15 in. 5.47 cm
  • Mounting Box Minimum Dimensions:
    Width: 1.80 in. 4.57 cm
    Depth: 1.75 in. 4.45 cm
  • Ambient Operating Environment: 0° C to 55° C
testtesttesttesttesttesttesttesttesttesttesttest
3RU Rack Panel Mount for 9 Decora Models
Radio Design Labs RM-D9 3RU Rack Panel Mount for 9 Decora Models
Radio Design Labs' RM-D9 is a 3 RU rack panel that allows the mounting of 9 Decora products, such as RDL remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens.The ...
Single-Gang Universal Wall Box
Radio Design Labs WB-1U Single-Gang Universal Wall Box
Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
Wall Plate, Single Cover Plate, White
Radio Design Labs CP1-W Wall Plate, Single Cover Plate, White
For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-1U Universal Wall Box.
Single Gang Decora Cover Plate in Stainless Steel
Radio Design Labs CP-1S Single Gang Decora Cover Plate in Stainless Steel
The Radio Design Labs CP-1S is a single gang decora cover plate in stainless steel.Dimensions: 4.55" H x 2.8" W (11.6 x 7.1 cm)Package Dimensions: 2" x 3"Shipping Weight: 0.072 lbs
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)
Radio Design Labs DC-4G Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)
Radio Design Labs' DC-4G desktop chassis holds four Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount to ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Wall Mount Chasis for Decora
Radio Design Labs DC-2G Wall Mount Chasis for Decora
The DC-2G desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desk Top Chassis for Decora, White
Radio Design Labs DC-2W Desk Top Chassis for Decora, White
The DC-2W white desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
1RU Rack Panel Mount for 3 Decora Models
Radio Design Labs RM-D3 1RU Rack Panel Mount for 3 Decora Models
Radio Design Labs' RM-D3 is a 1 RU rack panel that allows the mounting of 3 Decora products, such as RDL® remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens. The ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Wall Mount Chasis for Decora
Radio Design Labs DC-1G Wall Mount Chasis for Decora
The DC-1G desktop chassis holds one Decora®-style product, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a vertical ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Dual-Gang Universal Wall Box
Radio Design Labs WB-2U Dual-Gang Universal Wall Box
Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Double Cover Plate/Gray
Radio Design Labs CP-2/G Double Cover Plate/Gray
For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-2U Universal Wall Box. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
Single-Gang Gray Wall Plate for SMB-1, DC-1, WB-1U, Decora-Style Products
Radio Design Labs CP-1/G Single-Gang Gray Wall Plate for SMB-1, DC-1, WB-1U, Decora-Style Products
Radio Design Labs' CP-1G is for use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels.  Compatible with Decora style products and American electrical boxes.Height: 4.55" (11.6 cm)Width: 2.80" (7.1 cm)
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.