Radio Design Labs EZ-MX4ML
Microphone and Stereo Line Mixer 4x1

OUR PART #  EZ-MX4ML


The EZ-MX4ML is a stereo audio mixer with two mic and two line inputs. The mic inputs provide phantom voltage on XLR jacks. Both line inputs connect through RCA jacks; one also includes a MINI-jack input. Left and right channel LED VU metering facilitates easy level adjustment.

The EZ-MX4ML is used in houses of worship, restaurants, clubs, meeting rooms, studios, broadcast and commercial sound systems. Power supply included.

Radio Design Labs EZ-MX4ML Features:

  • Four Input Mixer, Two Mic and Two Line Inputs
  • Two Balanced Microphone Inputs on XLR
  • One Unbalanced Line Input on RCA Jacks
  • One Line Input on MINI or RCA Jacks
  • Unbalanced Output on RCA Jacks
  • Microphone Inputs Provide Phantom Voltage
  • Dual-LED VU Meter for Each Channel

Radio Design Labs EZ-MX4ML Specifications:

  • Mic inputs (2): 1.2 kO balanced on XLR jack, mic-level, -11 dBu max.
  • Line inputs (3): > 10 kO, -10 dBV nominal on RCAjacks, -10 dBV nominal on RCA jacks or Mini Jack, +20 dBV max.
  • Level controls (4): Off to 50 dB gain (mic), Off to12 dB gain (line)
  • Output: -10 dBV nominal on RCA jacks or Mini jack (stereo), +16 dBV max.
  • Frequency Response: 80 Hz to 40 kHz (±1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter), 10 Hz to 20 kHz (±0.01dB, line input)
  • THD+N: < 0.1% (20 Hz to 20 kHz, -50 dBu mic input), < 0.05% (20 Hz to 20 kHz, line input)
  • Crosstalk: < -72 dB (1 kHz)
  • CMRR: > -55 dB (20 to 20 kHz, mic input)
  • Metering: Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output
  • Phantom: 24 V (IEC 1938: 1996-12)
  • Noise: < -65 dB (below -10 dBV output, -50 dBu mic input), < -75 dB (below -10 dBV output, line input)
  • 24 Vdc power supply current: 50 mA (idle), 80 mA(max.), 100 mA (max. with phantom)  Powersupply included.
  • Power supply input voltage: 100 to 240 VAC
  • Warranty: 3 Years; contact RDL technical support department for assistance
  • Case dimensions (WxD): 5.75” x 3” (14.6 x 7.6 cm)
  • Mounting size: 1/3 rack width
Surface Mount Bezel 1/3 Rack
Radio Design Labs EZ-SMB2 Surface Mount Bezel 1/3 Rack
Surface mount bezel for 1/3 rack width EZ products.
24 VDC 500mA Switching Power Supply, North American Model
Radio Design Labs PS-24AS 24 VDC 500mA Switching Power Supply, North American Model
Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
Under Counter Bracket
Radio Design Labs EZ-UCB2 Under Counter Bracket
The Radio Design Labs EZ-UCB2 is a under counter bracket pair for all EZ product widths. Radio Design Labs EZ-UCB2 Features: Brackets Snap on EZ Case for Easy Alignment EZ Product Secures Quickly Using Two Screws Brackets Fasten to ...
Component Chasis, 6 x 1/6 RU
Radio Design Labs EZ-CC6 Component Chasis, 6 x 1/6 RU
Component Chassis for 6 Increments of 1/6 Rack WidthFeatures: Mounts All EZ A/V Products Mounts EZ Storage Drawers Cover Lifts Off for Easy Product Mounting Integral Heavy-Duty Non-Skid Rubber Feet
Usually ships in 7-14 business days.
Need it sooner? Call us!
Rack Adapter
Radio Design Labs EZ-RA6 Rack Adapter
Rack Adapter for 6 Increments of 1/6 Rack Width Mounts All EZ A/V Products Mounts EZ Storage Drawers Base Plate Slides Out for Easy Product Mounting Occupies One RU in Standard 19¨ Rack
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Chassis 1/3 Rack
Radio Design Labs EZ-DC2 Desktop Chassis 1/3 Rack
Desktop Chassis for 1/3 Rack Width EZ Products Mounts 1/3 Width EZ Product to Desktop Installs Quickly With Two Screws Covers Cable Port in Desktop Provides Space for Excess Wire
Usually ships in 7-14 business days.
Need it sooner? Call us!
1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
Radio Design Labs EZ-SD1 1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
RDL's EZ-SD1 is a 1/6 rack width storage drawer designed to mount in RDL's EZ-CC6 or EZ-RA6 rack adapters. The drawer holds adapters and cables and can be used in place of filler panels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Filler Panel, 1/6RU
Radio Design Labs EZ-FP1 Filler Panel, 1/6RU
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Click to download

Radio Design Labs EZ-MX4ML
Microphone and Stereo Line Mixer 4x1

OUR PART #  EZ-MX4ML

Product Information:

The EZ-MX4ML is a stereo audio mixer with two mic and two line inputs. The mic inputs provide phantom voltage on XLR jacks. Both line inputs connect through RCA jacks; one also includes a MINI-jack input. Left and right channel LED VU metering facilitates easy level adjustment.

The EZ-MX4ML is used in houses of worship, restaurants, clubs, meeting rooms, studios, broadcast and commercial sound systems. Power supply included.

Radio Design Labs EZ-MX4ML Features:

  • Four Input Mixer, Two Mic and Two Line Inputs
  • Two Balanced Microphone Inputs on XLR
  • One Unbalanced Line Input on RCA Jacks
  • One Line Input on MINI or RCA Jacks
  • Unbalanced Output on RCA Jacks
  • Microphone Inputs Provide Phantom Voltage
  • Dual-LED VU Meter for Each Channel

Radio Design Labs EZ-MX4ML Specifications:

  • Mic inputs (2): 1.2 kO balanced on XLR jack, mic-level, -11 dBu max.
  • Line inputs (3): > 10 kO, -10 dBV nominal on RCAjacks, -10 dBV nominal on RCA jacks or Mini Jack, +20 dBV max.
  • Level controls (4): Off to 50 dB gain (mic), Off to12 dB gain (line)
  • Output: -10 dBV nominal on RCA jacks or Mini jack (stereo), +16 dBV max.
  • Frequency Response: 80 Hz to 40 kHz (±1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter), 10 Hz to 20 kHz (±0.01dB, line input)
  • THD+N: < 0.1% (20 Hz to 20 kHz, -50 dBu mic input), < 0.05% (20 Hz to 20 kHz, line input)
  • Crosstalk: < -72 dB (1 kHz)
  • CMRR: > -55 dB (20 to 20 kHz, mic input)
  • Metering: Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output
  • Phantom: 24 V (IEC 1938: 1996-12)
  • Noise: < -65 dB (below -10 dBV output, -50 dBu mic input), < -75 dB (below -10 dBV output, line input)
  • 24 Vdc power supply current: 50 mA (idle), 80 mA(max.), 100 mA (max. with phantom)  Powersupply included.
  • Power supply input voltage: 100 to 240 VAC
  • Warranty: 3 Years; contact RDL technical support department for assistance
  • Case dimensions (WxD): 5.75” x 3” (14.6 x 7.6 cm)
  • Mounting size: 1/3 rack width
Surface Mount Bezel 1/3 Rack
Radio Design Labs EZ-SMB2 Surface Mount Bezel 1/3 Rack
Surface mount bezel for 1/3 rack width EZ products.
24 VDC 500mA Switching Power Supply, North American Model
Radio Design Labs PS-24AS 24 VDC 500mA Switching Power Supply, North American Model
Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
Under Counter Bracket
Radio Design Labs EZ-UCB2 Under Counter Bracket
The Radio Design Labs EZ-UCB2 is a under counter bracket pair for all EZ product widths. Radio Design Labs EZ-UCB2 Features: Brackets Snap on EZ Case for Easy Alignment EZ Product Secures Quickly Using Two Screws Brackets Fasten to ...
Component Chasis, 6 x 1/6 RU
Radio Design Labs EZ-CC6 Component Chasis, 6 x 1/6 RU
Component Chassis for 6 Increments of 1/6 Rack WidthFeatures: Mounts All EZ A/V Products Mounts EZ Storage Drawers Cover Lifts Off for Easy Product Mounting Integral Heavy-Duty Non-Skid Rubber Feet
Usually ships in 7-14 business days.
Need it sooner? Call us!
Rack Adapter
Radio Design Labs EZ-RA6 Rack Adapter
Rack Adapter for 6 Increments of 1/6 Rack Width Mounts All EZ A/V Products Mounts EZ Storage Drawers Base Plate Slides Out for Easy Product Mounting Occupies One RU in Standard 19¨ Rack
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Chassis 1/3 Rack
Radio Design Labs EZ-DC2 Desktop Chassis 1/3 Rack
Desktop Chassis for 1/3 Rack Width EZ Products Mounts 1/3 Width EZ Product to Desktop Installs Quickly With Two Screws Covers Cable Port in Desktop Provides Space for Excess Wire
Usually ships in 7-14 business days.
Need it sooner? Call us!
1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
Radio Design Labs EZ-SD1 1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
RDL's EZ-SD1 is a 1/6 rack width storage drawer designed to mount in RDL's EZ-CC6 or EZ-RA6 rack adapters. The drawer holds adapters and cables and can be used in place of filler panels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Filler Panel, 1/6RU
Radio Design Labs EZ-FP1 Filler Panel, 1/6RU
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.