Similar Models

JBL Control 50S/T
150W 8" Subwoofer for Control 52 Satellite Speakers in White

OUR PART #  CONTROL-50S/T-WH

Log In for price!

Don't have an account? Apply today!

JBL's Control 50S/T 150 Watt (600 Watt peak) subwoofer contains a high-power, long-excursion, 200 mm (8") driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5") 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.

JBL Control 50S/T Features:

  • Stylish, unobtrusive design fits into a wide variety of decors
  • High fidelity sound
  • Selectable 70V/100V for distributed lines, or low impedance
  • Versatility for either two or four satellite speakers per system
  • Ability to mix and match with Control Contractor 40 Series in ceiling models
  • Wall-mount brackets included

JBL Control 50S/T Specifications:

  • Frequency Range (-10 dB): 32 Hz – 200 Hz
  • Frequency Response (±3 dB): 50 Hz – 150 Hz
  • Power Capacity:
    • 300 Watts Continuous Program Power (2 hrs)
    • 150 Watts Continuous Pink Noise (2 hrs)
    • 200 Watts Continuous Program Power (100 hrs)
    • 100 Watts Continuous Pink Noise (100 hrs)
  • Nominal Sensitivity (2.83V, 1m): 95 dB (near corner), 89 dB (center ofwall)
  • Rated Maximum SPL (1m):
    - 115 dB average, 121 dB peak (nearcorner)
    - 109 dB average, 115 dB peak (center of wall)
  • Nominal Impedance: 8 ohms (in bypass/thru mode)
  • Transformer Taps: 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
  • Transducer Driver: 200 mm (8") with polypropylene cone, butyl rubber surround, 38 mm (1.5") 4-layer copper-clad coil, vented aluminum former
  • Input Connectors: Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)
  • Material: Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
  • Cabinet Dimensions: 14" H x 15.4" W x 8" D (356 x391 x 203 mm)
  • Wall Bracket Dimensions: 0.6" D (15 mm)
  • Wall Bracket: 0.9" (2.3 mm) thick zinc-plated and painted cold-rolled steel
  • Net Weight: 20 lbs. (9 kg)
  • Shipping Weight: 23 lbs. (10.2 kg)
  • Included Accessories: Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.

NOTE: Shown above in black, comes in white.

JBL Control 50S/T
150W 8" Subwoofer for Control 52 Satellite Speakers in White

OUR PART #  CONTROL-50S/T-WH

Product Information:

JBL's Control 50S/T 150 Watt (600 Watt peak) subwoofer contains a high-power, long-excursion, 200 mm (8") driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5") 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.

JBL Control 50S/T Features:

  • Stylish, unobtrusive design fits into a wide variety of decors
  • High fidelity sound
  • Selectable 70V/100V for distributed lines, or low impedance
  • Versatility for either two or four satellite speakers per system
  • Ability to mix and match with Control Contractor 40 Series in ceiling models
  • Wall-mount brackets included

JBL Control 50S/T Specifications:

  • Frequency Range (-10 dB): 32 Hz – 200 Hz
  • Frequency Response (±3 dB): 50 Hz – 150 Hz
  • Power Capacity:
    • 300 Watts Continuous Program Power (2 hrs)
    • 150 Watts Continuous Pink Noise (2 hrs)
    • 200 Watts Continuous Program Power (100 hrs)
    • 100 Watts Continuous Pink Noise (100 hrs)
  • Nominal Sensitivity (2.83V, 1m): 95 dB (near corner), 89 dB (center ofwall)
  • Rated Maximum SPL (1m):
    - 115 dB average, 121 dB peak (nearcorner)
    - 109 dB average, 115 dB peak (center of wall)
  • Nominal Impedance: 8 ohms (in bypass/thru mode)
  • Transformer Taps: 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
  • Transducer Driver: 200 mm (8") with polypropylene cone, butyl rubber surround, 38 mm (1.5") 4-layer copper-clad coil, vented aluminum former
  • Input Connectors: Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)
  • Material: Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
  • Cabinet Dimensions: 14" H x 15.4" W x 8" D (356 x391 x 203 mm)
  • Wall Bracket Dimensions: 0.6" D (15 mm)
  • Wall Bracket: 0.9" (2.3 mm) thick zinc-plated and painted cold-rolled steel
  • Net Weight: 20 lbs. (9 kg)
  • Shipping Weight: 23 lbs. (10.2 kg)
  • Included Accessories: Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.

NOTE: Shown above in black, comes in white.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.