SKB Cases 3I-1813-7B-C
Molded Case 18.5" x 13" x 7", Cubed Foam

OUR PART #  3I-1813-7B-C


The 3I-1813-7B-C Mil-Std waterproof black case (5" Deep) is an injection molded ultra high-strength polypropylene copolymer resin case. It features a gasketed, water and dust-tight, submersible design that is resistant to corrosion and impact damage. The case is ATA category 1 rated. There is a continuous molded-in hinge, "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle and automatic ambient pressure equalization valve. It is resistant to UV, solvents, corrosion, fungus and impact damage, and the cases are lockable with a customer supplied padlock.

Features:

  • Cubed foam interior
  • Injection molded ultra high-strength polypropylene copolymer resin case
  • Certifications:
    ATA (Air Transport Association) category 1 rated
    MIL-STD-810F Military specification for resistance to UV, solvents, corrosion, fungus and impact damage
    MIL-STD-C-4150J Military specification for waterproof and water-vapor proof cases for transit and storage
    IP67 Military specification for protection against dust and against the effect of immersion between 15cm and 1.0 m
    MIL-STD-648C Military specification for automatic ambient pressure equalization valve
  • Trigger release latch system is lockable with a customer supplied padlock
  • Continuous molded-in hinge for added protection
  • Temperature rating = -40 to +160°F (-40 to +71.11°C)
  • Snap-down rubber over-molded cushion grip handle

Specifications:

  • Material:
    Exterior: Ultra high-strength polypropylene copolymer resin
    Interior: 1.0" thick cubed foam, 3/4" dye cut squares
  • Type of Closure:
    Trigger release latch system
    Lockable with a customer supplied padlock
    Continuous molded-in hinge for added protection
  • Exterior Dimensions: 20.75 x 15.125 x 7.81" (52.7 x 38.74 x 19.84cm) (LxWxD)
  • Interior Dimensions:
    Lid depth: 1.5" (3.81cm)
    Base depth: 5.5" (13.97cm)
    18.5 x 13 x 7.0" (46.99 x 33.02 x 17.78cm) (LxWxH)
  • Volume:
    Exterior space: 1.43 ft³ (0.041 m³)
    Interior space: 0.97 ft³ (0.028 m³)
  • Interior Fitting: 1.0" thick cubed foam, 3/4" dye cut squares
  • Accommodates: Gear that needs protection from water and dust
  • Carrying/Transport Options: Snap-down cushion grip handle
  • Weight: 10 lbs (4.54kg)
iSeries Medium Colored Replacement Handle
SKB Cases 3i-HD80 iSeries Medium Colored Replacement Handle
SKB's 3i-HD80 Medium Colored Handles are 6.75" long and are available in blue, red, green, or yellow. These cushioned over-molded handles allow you to color code your black SKB iSeries cases to tell them apart. Compatitble with ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

SKB Cases 3I-1813-7B-C
Molded Case 18.5" x 13" x 7", Cubed Foam

OUR PART #  3I-1813-7B-C

Product Information:

The 3I-1813-7B-C Mil-Std waterproof black case (5" Deep) is an injection molded ultra high-strength polypropylene copolymer resin case. It features a gasketed, water and dust-tight, submersible design that is resistant to corrosion and impact damage. The case is ATA category 1 rated. There is a continuous molded-in hinge, "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle and automatic ambient pressure equalization valve. It is resistant to UV, solvents, corrosion, fungus and impact damage, and the cases are lockable with a customer supplied padlock.

Features:

  • Cubed foam interior
  • Injection molded ultra high-strength polypropylene copolymer resin case
  • Certifications:
    ATA (Air Transport Association) category 1 rated
    MIL-STD-810F Military specification for resistance to UV, solvents, corrosion, fungus and impact damage
    MIL-STD-C-4150J Military specification for waterproof and water-vapor proof cases for transit and storage
    IP67 Military specification for protection against dust and against the effect of immersion between 15cm and 1.0 m
    MIL-STD-648C Military specification for automatic ambient pressure equalization valve
  • Trigger release latch system is lockable with a customer supplied padlock
  • Continuous molded-in hinge for added protection
  • Temperature rating = -40 to +160°F (-40 to +71.11°C)
  • Snap-down rubber over-molded cushion grip handle

Specifications:

  • Material:
    Exterior: Ultra high-strength polypropylene copolymer resin
    Interior: 1.0" thick cubed foam, 3/4" dye cut squares
  • Type of Closure:
    Trigger release latch system
    Lockable with a customer supplied padlock
    Continuous molded-in hinge for added protection
  • Exterior Dimensions: 20.75 x 15.125 x 7.81" (52.7 x 38.74 x 19.84cm) (LxWxD)
  • Interior Dimensions:
    Lid depth: 1.5" (3.81cm)
    Base depth: 5.5" (13.97cm)
    18.5 x 13 x 7.0" (46.99 x 33.02 x 17.78cm) (LxWxH)
  • Volume:
    Exterior space: 1.43 ft³ (0.041 m³)
    Interior space: 0.97 ft³ (0.028 m³)
  • Interior Fitting: 1.0" thick cubed foam, 3/4" dye cut squares
  • Accommodates: Gear that needs protection from water and dust
  • Carrying/Transport Options: Snap-down cushion grip handle
  • Weight: 10 lbs (4.54kg)
iSeries Medium Colored Replacement Handle
SKB Cases 3i-HD80 iSeries Medium Colored Replacement Handle
SKB's 3i-HD80 Medium Colored Handles are 6.75" long and are available in blue, red, green, or yellow. These cushioned over-molded handles allow you to color code your black SKB iSeries cases to tell them apart. Compatitble with ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM