Audio Technologies Inc. DA1000
Distribution Amp, Analog, 1x8

OUR PART #  DA1000


With its new higher power outputs (+26dBm) at lower noise (-100dBm EIN) the updated DA1000 is ideal for every application and every budget.

Avoid RF and hum pick-up problems from noisy, lossy splitters. Prevent hard-to-find shorts from multiple taps on critical lines. Boost low console outputs. Drive long lines. Eliminate rolloff and distortion from mismatched load impedances. These ATI DAs fit neatly on a desktop or can be rack mounted with ATI's accessory Rack Mount Shelf. They use reliable barrier block connectors with fan-out strips for easy prewiring and quick-change servicing.

The DA1000 has a single, high output, active balanced driver per channel that is resistively split into 4 or 8 outputs each, all driven at precisely the same level. These economical units feature output clipping LEDs and a headphone/metering jack in a half rack package that you can mount singly or side-by-side in only 1RU of vertical space.

Features

  • Output clipping indicators
  • Signal present indicator
  • Front phone jack for headphones, metering or auxiliary ninth output
  • Single or dual side-by-side rack mounting kits
  • Eight active balanced outputs with +26dBm each; full short circuit isolation
  • Heavy common mode bypassing of all output and input lines for superior RF protection
  • High slex rate design provides totally transparent operation

Specifications

  • Output Level: +26dBm into 600 ohms
  • Distortion: 0.0001% typical THD 20Hz to 20kHz
  • Frequency Response: +/-.25dB, at 20 to 20kHz, -3dB at 100 kHz
  • Noise: -100dBm EIN, 20Hz-20kHz
  • Crosstalk: 70dB minimum @ 1kHz
  • Gain: 26dB; front panel input level controls
  • Inputs: 30k ohm balanced bridging
  • Hum Rejection: 80dB hum CMR 60-120Hz
  • Mounting: 21075-501 Accessory Rack Shelf mounts two units side by side
  • Terminals: Rear Barrier Block; Fanning Strip supplied
  • Power: 115 VAC +/-10%, 47-63 Hz; 230 VAC with internal wiring change
  • Size (W x H x D): 8 1/2" x 1 3/4" x 7"
  • Shipping Weight: 4 lbs
  • Warranty: Limited, One Year Warranty

Audio Technologies Inc. DA1000
Distribution Amp, Analog, 1x8

OUR PART #  DA1000

Product Information:

With its new higher power outputs (+26dBm) at lower noise (-100dBm EIN) the updated DA1000 is ideal for every application and every budget.

Avoid RF and hum pick-up problems from noisy, lossy splitters. Prevent hard-to-find shorts from multiple taps on critical lines. Boost low console outputs. Drive long lines. Eliminate rolloff and distortion from mismatched load impedances. These ATI DAs fit neatly on a desktop or can be rack mounted with ATI's accessory Rack Mount Shelf. They use reliable barrier block connectors with fan-out strips for easy prewiring and quick-change servicing.

The DA1000 has a single, high output, active balanced driver per channel that is resistively split into 4 or 8 outputs each, all driven at precisely the same level. These economical units feature output clipping LEDs and a headphone/metering jack in a half rack package that you can mount singly or side-by-side in only 1RU of vertical space.

Features

  • Output clipping indicators
  • Signal present indicator
  • Front phone jack for headphones, metering or auxiliary ninth output
  • Single or dual side-by-side rack mounting kits
  • Eight active balanced outputs with +26dBm each; full short circuit isolation
  • Heavy common mode bypassing of all output and input lines for superior RF protection
  • High slex rate design provides totally transparent operation

Specifications

  • Output Level: +26dBm into 600 ohms
  • Distortion: 0.0001% typical THD 20Hz to 20kHz
  • Frequency Response: +/-.25dB, at 20 to 20kHz, -3dB at 100 kHz
  • Noise: -100dBm EIN, 20Hz-20kHz
  • Crosstalk: 70dB minimum @ 1kHz
  • Gain: 26dB; front panel input level controls
  • Inputs: 30k ohm balanced bridging
  • Hum Rejection: 80dB hum CMR 60-120Hz
  • Mounting: 21075-501 Accessory Rack Shelf mounts two units side by side
  • Terminals: Rear Barrier Block; Fanning Strip supplied
  • Power: 115 VAC +/-10%, 47-63 Hz; 230 VAC with internal wiring change
  • Size (W x H x D): 8 1/2" x 1 3/4" x 7"
  • Shipping Weight: 4 lbs
  • Warranty: Limited, One Year Warranty
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM