Renkus-Heinz PF1-500R
500W RMS @ 4 Ohms PF Series Amp Module with RHAON

OUR PART #  PF1-500R


The Renkus-Heinz PF Series, Class D digital amplifiers light weight switching power supplies are over 70% efficient at full output. Their high efficiency reducing AC power requirements and eliminating the need for a cooling fan.

The PF Series, Intelligent Digital Amplifiers, drive loudspeakers to unprecedented levels of accuracy and performance. The PF Amplifiers combine comprehensive driver protection, parametric equalization and light, cool Class D power amplfication into a single compact unit.

Whenever you are ready for Ethernet audio networking, your Renkus-Heinz loudspeakers are, too. RHAON empowers you with full control over digital audio distribution, speaker-specific DSP and control/monitoring – all using standard Ethernet hardware and cable.

The PF1-500R is identical to the PF1-500 except for the addition of the RHAON Network Interface.

Renkus-Heinz PF1-500R Specifications:

  • Power: 500 W RMS @ 4O, 500 W Burst
  • Frequency Response: +0.0, -.5 dB, 20 Hz to 20 kHz
  • THD Distortion: < 0.02% typical
  • Hum & Noise: <100 dB (A weighted)
  • Damping: >100
  • Input: 10K Ohm balanced differential
  • Sensitivity: 1.0 V for RPO
  • CMR: 74 dB
  • Controls: Gain (screwdriver adjustable)
  • Connectors: Input: Looping XLR; female in, male out (pin 1chassis, pin 2 +, pin 3 -)
  • Power:
    • Power: EC Power connector
    • Universal 90–260 VAC,50/60Hz.
    • 5A @ 120 V, 2.5A @ 240V
    • Idle current: 400 mA @ 120V;200 mA @240V
    • Max inrush current: 1 A
  • Inputs:
    • Cobranet; dual RJ45 connectors; accept
    • Cat e5 copper cable
    • AES/EBU; Phoenix connectors
    • Analog; Phoenix connectors
  • Digital Format: 16 or 24 bit PCM; 48 or 96 kHz samplerate; selectable Network Latency
  • Protection: Soft & Peak Limiting, Excursion Control & Thermal Regulation

Renkus-Heinz PF1-500R
500W RMS @ 4 Ohms PF Series Amp Module with RHAON

OUR PART #  PF1-500R

Product Information:

The Renkus-Heinz PF Series, Class D digital amplifiers light weight switching power supplies are over 70% efficient at full output. Their high efficiency reducing AC power requirements and eliminating the need for a cooling fan.

The PF Series, Intelligent Digital Amplifiers, drive loudspeakers to unprecedented levels of accuracy and performance. The PF Amplifiers combine comprehensive driver protection, parametric equalization and light, cool Class D power amplfication into a single compact unit.

Whenever you are ready for Ethernet audio networking, your Renkus-Heinz loudspeakers are, too. RHAON empowers you with full control over digital audio distribution, speaker-specific DSP and control/monitoring – all using standard Ethernet hardware and cable.

The PF1-500R is identical to the PF1-500 except for the addition of the RHAON Network Interface.

Renkus-Heinz PF1-500R Specifications:

  • Power: 500 W RMS @ 4O, 500 W Burst
  • Frequency Response: +0.0, -.5 dB, 20 Hz to 20 kHz
  • THD Distortion: < 0.02% typical
  • Hum & Noise: <100 dB (A weighted)
  • Damping: >100
  • Input: 10K Ohm balanced differential
  • Sensitivity: 1.0 V for RPO
  • CMR: 74 dB
  • Controls: Gain (screwdriver adjustable)
  • Connectors: Input: Looping XLR; female in, male out (pin 1chassis, pin 2 +, pin 3 -)
  • Power:
    • Power: EC Power connector
    • Universal 90–260 VAC,50/60Hz.
    • 5A @ 120 V, 2.5A @ 240V
    • Idle current: 400 mA @ 120V;200 mA @240V
    • Max inrush current: 1 A
  • Inputs:
    • Cobranet; dual RJ45 connectors; accept
    • Cat e5 copper cable
    • AES/EBU; Phoenix connectors
    • Analog; Phoenix connectors
  • Digital Format: 16 or 24 bit PCM; 48 or 96 kHz samplerate; selectable Network Latency
  • Protection: Soft & Peak Limiting, Excursion Control & Thermal Regulation
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM