Ashly ne8250pe
8 Channel Network Power Amplifier with 250W per Channel @ 4 Ohms and Protea DSP

OUR PART #  NE8250PE

Log In for price!

Don't have an account? Apply today!

The Ashly NE-Series (Network Enabled) with sixteen multi-channel amplifiers. Targeted for the performance installation and constant voltage markets, these amplifiers add a new level of power and control from the simplest to most advanced, 25V, 70V and 100V amplifiers and provide 250W of power per channel. Network Enabled (NE) amplifiers offer ease of use, full setup, control and monitoring using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed. Euroblock input connectors and world renowned Protea DSP signal processing.

The DSP library is extensive and utilizes two SHARC 32-bit/96kHz processors. Processing blocks include Graphic, Parametric, Notch and Shelving Equalization, High-, Low- and All-Pass Filters (HPF/LPF/APF) with up to 48dB/Octave slopes, Delay, Compressor/Limiter, Gate, Ducking, Auto-leveler, Gain and Signal Generators (sivewave, white and pink noise). A full Matrix Mixer with assignable routing allows any input to drive any or all amplifier outputs. Presets can be used to store and retrieve global parameters of an entire amplifier's control surface and DSP section.

Additionally, each amplifier also provides DC voltage control of the attenuators which makes it a snap to control volume from remote locations, preset recall, Remote Power Standby and data in and out ports for connecting accessories like the WR-5 to control user selected parameters. There are LED indicators for power, standby, protect, network communications and each channel has a four-step signal meter, bridge mono, temperature and current indicators. Four-channel Mic-pre, AES/EBU, and Cobranet input modules will be available as options.

Ashly ne8250pe Features:

  • Eight channel amplifier
  • Ethernet control is standard
  • Low-Z, 25V, 70V and 100V models
  • Extensive DSP
  • Easy and intuitive user interface
  • Extensive protection circuitry
  • Safety/Compliance: cTUVus/FCC, CE (pending), RoHS
  • Level attenuators for each channel
  • Power switch can be disabled by software
  • 4-step signal level and clip LEDs
  • 10/100 Ethernet port
  • Euroblock inputs and outputs
  • Remote level control
  • Preset recall
  • Remote power standby
  • Data in and out ports

Power Ratings:

  • 8 ohms: 8 x 150W
  • 4 ohms: 8 x 250W

Ashly ne8250pe Specifications

  • Signal to Noise (20Hz-20kHz, unweighted): >98dB
  • Power Consumption (Pink Noise @ 4 ohms):
    • 1/8th Output: 31.25W
    • 1/8th Draw: 360W
    • 1/8th Current: 4.8A
    • Idle Power: 35W
    • Idle Current: 0.5A
  • Output Circuitry: Class D
  • Input Sensitivity: 6.2dBu
  • Frequency Response: 20Hz-20kHz, +/-1.0dB
  • Damping Factor: - 8 ohm load, >250
  • Input Inpemdance: 20k ohms, balanced
  • Maximum Input Level: +21 dBu
  • Cooling: Temperature dependent speed-controlled fan (Front In, Side Out)
  • Front Panel Indicators per channel: Signal: -18, -12, -6, Clip, Temp, Current, Bridge
  • Front Panel Indicators: Overall power, standby, protect, disable, com
  • Attenuators: Per channel front panel
  • Input Connectors: each channel 3-pin Euroblock
  • Output Connectors: each channel Euroblock
  • Amplifier Protection: Output Overcurrent, DC Output, Main Supply Rail Overvoltage, Chassis Temperature, Inrush Limiting, Mains Fuse
  • Power Cable Connector: 15A Edison 3-prong IEC
  • Dimensions: 19" W x 3.5" H x 15.5" D
  • Weight: 21 lbs net, 26 lbs shipping
Remote, 6-button Network
Ashly NEWR-5 Remote, 6-button Network
The neWR-5 is a programmable Ethernet based remote control unit for Ashly NE Series and Pêma products. Connecting and powering the neWR-5 is done using standard Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch or ...
Programmable Zone Controller, Wall Mount, Six Button
Ashly WR-5 Programmable Zone Controller, Wall Mount, Six Button
The WR-5 is a microprocessor-based remote control unit for use with NE Series Amplifiers and processors and the Protea 24.24M. The WR-5 is designed to fit into a standard electrical wall box for remote control of assignable functions. ...
4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
Ashly WR-2 4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
The WR-2 allows selection of one of four presets via interlocking pushbutton switches. Each pushbutton switch connects to a screw-terminal on the rear of the 24.24M (labeled "1" through "8" "Preset Recall"). The terminal numbers correspond ...
Network Fader Remote Control, 16 Channel
Ashly FR-16 Network Fader Remote Control, 16 Channel
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
8 channel Network Fader Remote Control
Ashly FR-8 8 channel Network Fader Remote Control
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Remote
Ashly RD8C Desktop Remote
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
8-Channel Remote Level Control
Ashly RW8C 8-Channel Remote Level Control
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
2 Control Level Wallplate Remote for Ashly 24.24M
Ashly WR-1 2 Control Level Wallplate Remote for Ashly 24.24M
The WR-1 is an assignable, dual potentiometer remote volume control for the 24.24M. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock ...
Usually ships in 7-14 business days.
Need it sooner? Call us!

Ashly ne8250pe
8 Channel Network Power Amplifier with 250W per Channel @ 4 Ohms and Protea DSP

OUR PART #  NE8250PE

Product Information:

The Ashly NE-Series (Network Enabled) with sixteen multi-channel amplifiers. Targeted for the performance installation and constant voltage markets, these amplifiers add a new level of power and control from the simplest to most advanced, 25V, 70V and 100V amplifiers and provide 250W of power per channel. Network Enabled (NE) amplifiers offer ease of use, full setup, control and monitoring using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed. Euroblock input connectors and world renowned Protea DSP signal processing.

The DSP library is extensive and utilizes two SHARC 32-bit/96kHz processors. Processing blocks include Graphic, Parametric, Notch and Shelving Equalization, High-, Low- and All-Pass Filters (HPF/LPF/APF) with up to 48dB/Octave slopes, Delay, Compressor/Limiter, Gate, Ducking, Auto-leveler, Gain and Signal Generators (sivewave, white and pink noise). A full Matrix Mixer with assignable routing allows any input to drive any or all amplifier outputs. Presets can be used to store and retrieve global parameters of an entire amplifier's control surface and DSP section.

Additionally, each amplifier also provides DC voltage control of the attenuators which makes it a snap to control volume from remote locations, preset recall, Remote Power Standby and data in and out ports for connecting accessories like the WR-5 to control user selected parameters. There are LED indicators for power, standby, protect, network communications and each channel has a four-step signal meter, bridge mono, temperature and current indicators. Four-channel Mic-pre, AES/EBU, and Cobranet input modules will be available as options.

Ashly ne8250pe Features:

  • Eight channel amplifier
  • Ethernet control is standard
  • Low-Z, 25V, 70V and 100V models
  • Extensive DSP
  • Easy and intuitive user interface
  • Extensive protection circuitry
  • Safety/Compliance: cTUVus/FCC, CE (pending), RoHS
  • Level attenuators for each channel
  • Power switch can be disabled by software
  • 4-step signal level and clip LEDs
  • 10/100 Ethernet port
  • Euroblock inputs and outputs
  • Remote level control
  • Preset recall
  • Remote power standby
  • Data in and out ports

Power Ratings:

  • 8 ohms: 8 x 150W
  • 4 ohms: 8 x 250W

Ashly ne8250pe Specifications

  • Signal to Noise (20Hz-20kHz, unweighted): >98dB
  • Power Consumption (Pink Noise @ 4 ohms):
    • 1/8th Output: 31.25W
    • 1/8th Draw: 360W
    • 1/8th Current: 4.8A
    • Idle Power: 35W
    • Idle Current: 0.5A
  • Output Circuitry: Class D
  • Input Sensitivity: 6.2dBu
  • Frequency Response: 20Hz-20kHz, +/-1.0dB
  • Damping Factor: - 8 ohm load, >250
  • Input Inpemdance: 20k ohms, balanced
  • Maximum Input Level: +21 dBu
  • Cooling: Temperature dependent speed-controlled fan (Front In, Side Out)
  • Front Panel Indicators per channel: Signal: -18, -12, -6, Clip, Temp, Current, Bridge
  • Front Panel Indicators: Overall power, standby, protect, disable, com
  • Attenuators: Per channel front panel
  • Input Connectors: each channel 3-pin Euroblock
  • Output Connectors: each channel Euroblock
  • Amplifier Protection: Output Overcurrent, DC Output, Main Supply Rail Overvoltage, Chassis Temperature, Inrush Limiting, Mains Fuse
  • Power Cable Connector: 15A Edison 3-prong IEC
  • Dimensions: 19" W x 3.5" H x 15.5" D
  • Weight: 21 lbs net, 26 lbs shipping
Remote, 6-button Network
Ashly NEWR-5 Remote, 6-button Network
The neWR-5 is a programmable Ethernet based remote control unit for Ashly NE Series and Pêma products. Connecting and powering the neWR-5 is done using standard Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch or ...
Programmable Zone Controller, Wall Mount, Six Button
Ashly WR-5 Programmable Zone Controller, Wall Mount, Six Button
The WR-5 is a microprocessor-based remote control unit for use with NE Series Amplifiers and processors and the Protea 24.24M. The WR-5 is designed to fit into a standard electrical wall box for remote control of assignable functions. ...
4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
Ashly WR-2 4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
The WR-2 allows selection of one of four presets via interlocking pushbutton switches. Each pushbutton switch connects to a screw-terminal on the rear of the 24.24M (labeled "1" through "8" "Preset Recall"). The terminal numbers correspond ...
Network Fader Remote Control, 16 Channel
Ashly FR-16 Network Fader Remote Control, 16 Channel
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
8 channel Network Fader Remote Control
Ashly FR-8 8 channel Network Fader Remote Control
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Remote
Ashly RD8C Desktop Remote
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
8-Channel Remote Level Control
Ashly RW8C 8-Channel Remote Level Control
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
2 Control Level Wallplate Remote for Ashly 24.24M
Ashly WR-1 2 Control Level Wallplate Remote for Ashly 24.24M
The WR-1 is an assignable, dual potentiometer remote volume control for the 24.24M. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.