Applied Microphone (AMT) S15G
Condenser Microphone for Acoustic Guitar

OUR PART #  S15G


AMT's S15G is a low-profile condenser microphone that has a cardioid pattern which gives it better gain before feedback. The element as well as the mounting clamp is designed for the instrument. AMT designs microphones for each instrument and does NOT adapt elements or mounting gear to fit instruments. The S15G system clamps to the outside of the guitar. It is adjustable from a minimum of 3" to a maximum of 5-7/8". The AMT S15G features a flexiable 6" gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.

The microphone attaches to the side of the instrument, and is suspended in a 4 point isolation ring reducing handling noise.

The S15G terminates to the BP42 belt pack. It operates on either 9 volt battery or Phantom power to 52volts DC. It incorporates an LED to indicate the status of the voltage.

The S15G is terminated by a 3.5mm plug which connects to a belt pack preamp. The included belt pack houses a volume control, contours the setup for the intended instrument, and powers the microphone system appropriatly. A low Z cable and case is included.

The S15G now also comes with a cable that disconnects. This cable will allow the player to switch back and forth between the different AMT Preamps as well as convert it to the "W"ireless setup. Different cable's and preamps sold separately!

Specifications:

  • Element   Condenser
  • Polar Pattern  Cardoid
  • Frequency  50Hz - 18kHz
  • Sensitivity  -65dB+ 4dB
  • Impedance  150 Ohms*
  • Phantom Power  12 to 52 vDC*
  • Or 9 Volt battery
  • Max input SPL  140 dB
  • Dimension  6" Flex Arm
  • Cable  6'
  • Weight  Mic only: 49 grams

 

Applied Microphone (AMT) S15G
Condenser Microphone for Acoustic Guitar

OUR PART #  S15G

Product Information:

AMT's S15G is a low-profile condenser microphone that has a cardioid pattern which gives it better gain before feedback. The element as well as the mounting clamp is designed for the instrument. AMT designs microphones for each instrument and does NOT adapt elements or mounting gear to fit instruments. The S15G system clamps to the outside of the guitar. It is adjustable from a minimum of 3" to a maximum of 5-7/8". The AMT S15G features a flexiable 6" gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.

The microphone attaches to the side of the instrument, and is suspended in a 4 point isolation ring reducing handling noise.

The S15G terminates to the BP42 belt pack. It operates on either 9 volt battery or Phantom power to 52volts DC. It incorporates an LED to indicate the status of the voltage.

The S15G is terminated by a 3.5mm plug which connects to a belt pack preamp. The included belt pack houses a volume control, contours the setup for the intended instrument, and powers the microphone system appropriatly. A low Z cable and case is included.

The S15G now also comes with a cable that disconnects. This cable will allow the player to switch back and forth between the different AMT Preamps as well as convert it to the "W"ireless setup. Different cable's and preamps sold separately!

Specifications:

  • Element   Condenser
  • Polar Pattern  Cardoid
  • Frequency  50Hz - 18kHz
  • Sensitivity  -65dB+ 4dB
  • Impedance  150 Ohms*
  • Phantom Power  12 to 52 vDC*
  • Or 9 Volt battery
  • Max input SPL  140 dB
  • Dimension  6" Flex Arm
  • Cable  6'
  • Weight  Mic only: 49 grams

 

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM