Aviom AN-16/o v.4
16 Channel Line Level Output Module for Aviom Pro16 with DB25 Outputs

OUR PART #  AN16/O-V.4

Log In for price!

Don't have an account? Apply today!

The Aviom AN-16/o v.4 Output Module is a 1U rack-mount 16-channel digital-to-analog converter for Pro16® digital snake and audio distribution systems. Digital audio transmitted to the AN-16/o v.4 via Aviom's A-Net® Pro16 digital audio transmission protocol is converted to analog using 24-bit, 48kHz converters.

Sixteen balanced outputs are provided on the rear panel via DB25 multipin connectors. The analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level.

In personal mixing systems using the A360 Personal Mixer with the D800 or D800-Dante A-Net Distributors, the AN-16/o v.4 simplifies connections to wireless IEM systems. Each A360 Personal Mixer sends its stereo mix output back into the network which appears as a pair of channels on the AN-16/o v.4. Each AN-16/o v.4 supports up to eight A360s. Simply patch the analog outputs on the AN-16/o v.4 into the IEM transmitter's inputs. No analog cables are required at the A360 on stage.

Use the AN-16/o v.4 anywhere analog outputs are required: on stage or FOH in a digital snake, in the studio, for a recording split, or in even the most complex audio networks. Adding a digital split to a Pro16 system is as simple as connecting an additional AN-16/o v.4 Output Module.
The AN-16/o v.4 can be connected to a Pro64 digital snake or audio network by adding the ASI A-Net Systems Interface.

Aviom AN-16/o v.4 Specifications:

  • Audio Outputs:  16 channels, balanced
  • Outputs:  DB25 multipin connectors (2); Tascam® analog audio pinout impedance balanced output for mic, +4dBu, and +18dBu; differential output for +24dBu
  • D/A Conversion:  48 kHz sample rate, 24 bit
  • Frequency Response:  4 Hz - 22 kHz
  • A-Net Input/Output:  one EtherCon Category 5 (RJ45 connector)
  • A-Net Expansion:  one EtherCon Category 5 (RJ45 connector)
  • Output Level Settings:  Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu, and Mic
  • Channel LED Indicators:  Signal Present and Clip, per channel
  • Metering:  LEDs; green: Signal Present; red: Clip; per channel
  • Maximum Output Level:  +24 dBu
  • Output Impedance:  226 Ohms (+18dBu, +24dBu); 100 Ohms (+4dBu and mic)
  • Freq. Response:  4 Hz - 22 kHz +0.2dB/-3dB
  • THD +N:  < 0.004%
  • Crosstalk:  -90 dB
  • Bit Error Rate (BER):  10 (-12)
  • Signal to Noise (unweighted):  92 dB typical, A/D to D/A; Measured from AN-16/i to AN-16/o v.4 Output Module
  • Digital Connections:  A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1; Neutrik EtherCon connectors
  • A-Net Pro16:  A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; uses unshielded Cat-5e UTP (or better) cable
  • Latency:  < 0.620 msec (measured from analog input to analog output)
  • Power Supply: 
    • Type:  External, DC, universal switching type
    • Input Voltage:  100-240 volts, 50/60Hz, 30VA
    • Output Voltage:  24 VDC, 0.5 amp
    • Plug Size:  2 mm
  • Power:  24 VDC, 500mA
  • Dimensions:  19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
  • Weight:  6.8 lbs. (3.08 kg)
  • Options:  SB4 System Bridge; used to combine up to four A-Net streamsfor transmission over one Cat-5e cable

Aviom AN-16/o v.4
16 Channel Line Level Output Module for Aviom Pro16 with DB25 Outputs

OUR PART #  AN16/O-V.4

Product Information:

The Aviom AN-16/o v.4 Output Module is a 1U rack-mount 16-channel digital-to-analog converter for Pro16® digital snake and audio distribution systems. Digital audio transmitted to the AN-16/o v.4 via Aviom's A-Net® Pro16 digital audio transmission protocol is converted to analog using 24-bit, 48kHz converters.

Sixteen balanced outputs are provided on the rear panel via DB25 multipin connectors. The analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level.

In personal mixing systems using the A360 Personal Mixer with the D800 or D800-Dante A-Net Distributors, the AN-16/o v.4 simplifies connections to wireless IEM systems. Each A360 Personal Mixer sends its stereo mix output back into the network which appears as a pair of channels on the AN-16/o v.4. Each AN-16/o v.4 supports up to eight A360s. Simply patch the analog outputs on the AN-16/o v.4 into the IEM transmitter's inputs. No analog cables are required at the A360 on stage.

Use the AN-16/o v.4 anywhere analog outputs are required: on stage or FOH in a digital snake, in the studio, for a recording split, or in even the most complex audio networks. Adding a digital split to a Pro16 system is as simple as connecting an additional AN-16/o v.4 Output Module.
The AN-16/o v.4 can be connected to a Pro64 digital snake or audio network by adding the ASI A-Net Systems Interface.

Aviom AN-16/o v.4 Specifications:

  • Audio Outputs:  16 channels, balanced
  • Outputs:  DB25 multipin connectors (2); Tascam® analog audio pinout impedance balanced output for mic, +4dBu, and +18dBu; differential output for +24dBu
  • D/A Conversion:  48 kHz sample rate, 24 bit
  • Frequency Response:  4 Hz - 22 kHz
  • A-Net Input/Output:  one EtherCon Category 5 (RJ45 connector)
  • A-Net Expansion:  one EtherCon Category 5 (RJ45 connector)
  • Output Level Settings:  Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu, and Mic
  • Channel LED Indicators:  Signal Present and Clip, per channel
  • Metering:  LEDs; green: Signal Present; red: Clip; per channel
  • Maximum Output Level:  +24 dBu
  • Output Impedance:  226 Ohms (+18dBu, +24dBu); 100 Ohms (+4dBu and mic)
  • Freq. Response:  4 Hz - 22 kHz +0.2dB/-3dB
  • THD +N:  < 0.004%
  • Crosstalk:  -90 dB
  • Bit Error Rate (BER):  10 (-12)
  • Signal to Noise (unweighted):  92 dB typical, A/D to D/A; Measured from AN-16/i to AN-16/o v.4 Output Module
  • Digital Connections:  A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1; Neutrik EtherCon connectors
  • A-Net Pro16:  A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; uses unshielded Cat-5e UTP (or better) cable
  • Latency:  < 0.620 msec (measured from analog input to analog output)
  • Power Supply: 
    • Type:  External, DC, universal switching type
    • Input Voltage:  100-240 volts, 50/60Hz, 30VA
    • Output Voltage:  24 VDC, 0.5 amp
    • Plug Size:  2 mm
  • Power:  24 VDC, 500mA
  • Dimensions:  19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
  • Weight:  6.8 lbs. (3.08 kg)
  • Options:  SB4 System Bridge; used to combine up to four A-Net streamsfor transmission over one Cat-5e cable
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM