Turbosound LS-1522
15" Woofer for TXD252

OUR PART #  LS-1522


15" speaker for Turbsound model TXD-252.

The TXD-252 is a switchable passive/biamp fullrange loudspeaker enclosure designed for use in a wide variety of live sound, fixed installation and mobile DJ applications as well as in pubs, bars and nightclubs.

  It consists of two 15” reflex-loaded low frequency drivers and a 3” diaphragm high frequency driver on a rotatable 80°H x 50°V Converging Elliptical Waveguide™. The loudspeaker components are matched with an internal passive crossover network whichan easily be bypassed for bi-amplified operation.

  The high frequency horn can be rotated through 90° to allow a swap of the horizontal and vertical coverage patterns. This allows the cabinet to be suspended either horizontally or vertically in permanent installations using the M10 rigging points provided on the sides, top and rear of the cabinet.

  The trapezoidal cabinet is constructed from 15mm (5/8”) birch plywood, screwed and glued together for maximum rigidity, and is finished in black semi-matt textured paint.  Six recessed flush handles are provided for easy lifting and carrying and the rear of the cabinet is pre-drilled for optional T4 wheels. Four rubber feet are fitted to the bottom of the cabinet, and a grey powder-coated perforated steel mesh grille protects the drive units from damage.

  Two Neutrik Speakon NL4MP speaker connectors are provided on the rear panel for passive input and parallel connections.  An additional switched Speakon NL4 connector allows the TXD-252 to be used in biamplified mode.

Click to download

General Parts Questions

Question:
What do I do if my item still doesn’t work or has additional problems?
Answer: In most cases if your item has the same symptom or new symptoms it’s because the fault was originally misdiagnosed. Please be aware that we cannot be responsible for damages because of a misdiagnos......See more
Answer: In most cases if your item has the same symptom or new symptoms it’s because the fault was originally misdiagnosed. Please be aware that we cannot be responsible for damages because of a misdiagnosed fault, incorrect installation, or incorrect operation of your device.

If you’re not confident in your diagnosis it may be best to take your item to a qualified technician.

Question:
The part I purchased is defective or failed soon after my purchase. Does it have a warranty?
Answer: Possibly - some spare parts come with a warranty, typically with a shorter duration than the standard warranty for finished goods. In some cases manufacturers sell spare parts “as is” or won’t ......See more
Answer: Possibly - some spare parts come with a warranty, typically with a shorter duration than the standard warranty for finished goods. In some cases manufacturers sell spare parts “as is” or won’t consider an item eligible for return if the part isn’t installed by an authorized center.

If you’re concerned about the duration of a spare part warranty please contact us before placing your order. Be aware that if you install a part to repair an item that’s still under the manufacturer’s warranty you may void the warranty in your item by performing unauthorized repairs.

Question:
Can you help me diagnose my item?
Answer: In most cases it’s impractical to attempt a diagnosis without an item present along with the appropriate test equipment. If you’re not confident in your ability to diagnose the fault of your item;......See more
Answer: In most cases it’s impractical to attempt a diagnosis without an item present along with the appropriate test equipment. If you’re not confident in your ability to diagnose the fault of your item; it may be best to take your item to a qualified technician.
Question:
Am I ordering the correct part?
Answer: Check the product description to ensure your model is listed as compatible. Parts from the same manufacturer may seem compatible with your item but that isn’t always the case. If you find a ......See more
Answer: Check the product description to ensure your model is listed as compatible. Parts from the same manufacturer may seem compatible with your item but that isn’t always the case. If you find a part that appears to be a match for your item but your model isn’t listed - please contact us so we can confirm compatibility. It is possible that a part can fit more models than we have listed.

Parts appearance may vary from the original component depending on the manufacturer the vendor uses. Please be aware that we cannot be responsible for damages because of installation of an incorrect part. Unopened, uninstalled parts can be returned within 30 days.

Turbosound LS-1522
15" Woofer for TXD252

OUR PART #  LS-1522

Product Information:

15" speaker for Turbsound model TXD-252.

The TXD-252 is a switchable passive/biamp fullrange loudspeaker enclosure designed for use in a wide variety of live sound, fixed installation and mobile DJ applications as well as in pubs, bars and nightclubs.

  It consists of two 15” reflex-loaded low frequency drivers and a 3” diaphragm high frequency driver on a rotatable 80°H x 50°V Converging Elliptical Waveguide™. The loudspeaker components are matched with an internal passive crossover network whichan easily be bypassed for bi-amplified operation.

  The high frequency horn can be rotated through 90° to allow a swap of the horizontal and vertical coverage patterns. This allows the cabinet to be suspended either horizontally or vertically in permanent installations using the M10 rigging points provided on the sides, top and rear of the cabinet.

  The trapezoidal cabinet is constructed from 15mm (5/8”) birch plywood, screwed and glued together for maximum rigidity, and is finished in black semi-matt textured paint.  Six recessed flush handles are provided for easy lifting and carrying and the rear of the cabinet is pre-drilled for optional T4 wheels. Four rubber feet are fitted to the bottom of the cabinet, and a grey powder-coated perforated steel mesh grille protects the drive units from damage.

  Two Neutrik Speakon NL4MP speaker connectors are provided on the rear panel for passive input and parallel connections.  An additional switched Speakon NL4 connector allows the TXD-252 to be used in biamplified mode.

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.