Look Solutions VI-0194
Viper NT Fog Generator

OUR PART #  VI-0194

Log In for price!

Don't have an account? Apply today!

The Viper NT originates from the continued development and improvement of the Viper fog machine.  It unites the current digital technology with the proven technique and power of its predecessor.  Features a much simpler operation, reducing the amount of time needed to set up the machine.

Look Solutions VI-0194 Fog Generator Features:

  • The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.
  • Digital technology makes fine adjustment of the pump possible.In 1% increments, the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Viper NT to be used in both small and large locations.
  • The Viper NT can be controlled via DMX 512.The connection is done with 5-Pin XLR plugs.  The DMX start address can be adjusted and saved via the control panel.  The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option).  This connection is done with 3-Pin XLR plugs.  Astand-alone-mode is also possible. The adjustments are done directly at the machine. A short press of the start button makes the machine run.
  • With the internal timer, the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.

The Viper NT is equipped with new safety features.  On the front and back part of the cover, there are fixing points for safety bonds.  At both sides of the bottom of the machine are three holes to which a hanging yoke (complete with a collecting tray for fluid drips) can be fixed.

The following Look-fog fluids are available for the Viper NT:

  • Quick-Fog (thick, quick disappearing fluid)
  • Regular-Fog (thick, long lasting fluid)
  • Slow-Fog (thick, extremly long lasting fluid)

Look Solutions VI-0194 Fog Generator Specifications:

  • Power requirement: 1300 Watt
  • Voltage: 230V/50Hz or 120V/60Hz
  • Warm up time: approx. 7 min.
  • Fluid consumption at max. output: 120 ml/min.
  • Fluid consumption at continuous output: 35 ml/min.
  • Fluid tank capacity: 5 liter
  • Fog output adjustable in 99 steps
  • Output projection max.: 15 m
  • Fogging time at < 50% output: continuous output
  • Control: DMX 512
    0 - 10 Vanalog
    Stand-alone-Mode
    Radio remote (option)
  • Temperature control: Microprocessor controlled
  • Overheating protection: Heaterblock/Thermostat
    Pump/Thermal switch
  • Dimensions (L x W x H): 47 x 23 x 24 cm
  • Weight without bottle: approx. 8.6 kg

Advantages:

  • DMX as standard, analog and stand-alone-Mode
  • Internal timer
  • Easy handling
  • Powerful output
  • Fogging output adjustable in steps of 1% from 0 -99%
  • Continuous output
  • Easy bottle changing with quick-out connectors
Quick Fog Fluid (5L)
Look Solutions VI-3501 Quick Fog Fluid (5L)
For use with Viper and Orka fog machines.  Dissipates quickly.
Regular Fog Fluid (5L)
Look Solutions VI-3505 Regular Fog Fluid (5L)
For use with Viper and Orka fog machines.  Medium lasting duration.
ATA Case for Vipe NT/2.6
Look Solutions VI-1191 ATA Case for Vipe NT/2.6
ATA Case for the Viper NT and Viper 2.6.  The Viper can be fixed in the case with four screws.  Also includes a box for accesories in the lid. Dimensions (L x W x H): 56 x 27 x 36 cm
Usually ships in 7-14 business days.
Need it sooner? Call us!
Radio Remote
Look Solutions PT-1137 Radio Remote
Radio Remote (with 3-pin XLR plug Transmitter and receiver) for Unique2, Viper, Orka, and Cryo-Fog.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Hanging Set for Viper
Look Solutions VI-1192 Hanging Set for Viper
Hanging yoke for the Viper-series completely with collecting tray.  Ideal for hanging the machine on stages and for fixed installation in theaters and clubs.  The collecting tray can be fixed directly to the machine which helps ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Adapter,Ducting for Viper
Look Solutions VI-1193 Adapter,Ducting for Viper
Duct adapter for the Viper NT or 2.6 is fixed directly on the machine.  Hose diamter: 100mm
Usually ships in 7-14 business days.
Need it sooner? Call us!
XLR Remote
Look Solutions PT-1159 XLR Remote
The Look Solutions PT-1159 is an XLR remote that is compatible with their Power-Tiny, Unique, Viper NT, Viper 2.6, and the Orka. Cable sold separately.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Slow Fog Fluid (5L)
Look Solutions VI-3509 Slow Fog Fluid (5L)
For use with Viper and Orka fog machines.  Long lasting.
Please call for availability.
Tank Lid
Look Solutions VI-2121 Tank Lid
Tank lid for 2L and 10 L containers.  Usable with Unique 2, Viper, Orka and Cryo-Fog machines.
Usually ships in 7-14 business days.
Need it sooner? Call us!
XLR Cable 50ft
Look Solutions PT-1159C XLR Cable 50ft
Compatible with Unieque2, Viper, Orka, and Cyro-Fog.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Look Solutions VI-0194
Viper NT Fog Generator

OUR PART #  VI-0194

Product Information:

The Viper NT originates from the continued development and improvement of the Viper fog machine.  It unites the current digital technology with the proven technique and power of its predecessor.  Features a much simpler operation, reducing the amount of time needed to set up the machine.

Look Solutions VI-0194 Fog Generator Features:

  • The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.
  • Digital technology makes fine adjustment of the pump possible.In 1% increments, the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Viper NT to be used in both small and large locations.
  • The Viper NT can be controlled via DMX 512.The connection is done with 5-Pin XLR plugs.  The DMX start address can be adjusted and saved via the control panel.  The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option).  This connection is done with 3-Pin XLR plugs.  Astand-alone-mode is also possible. The adjustments are done directly at the machine. A short press of the start button makes the machine run.
  • With the internal timer, the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.

The Viper NT is equipped with new safety features.  On the front and back part of the cover, there are fixing points for safety bonds.  At both sides of the bottom of the machine are three holes to which a hanging yoke (complete with a collecting tray for fluid drips) can be fixed.

The following Look-fog fluids are available for the Viper NT:

  • Quick-Fog (thick, quick disappearing fluid)
  • Regular-Fog (thick, long lasting fluid)
  • Slow-Fog (thick, extremly long lasting fluid)

Look Solutions VI-0194 Fog Generator Specifications:

  • Power requirement: 1300 Watt
  • Voltage: 230V/50Hz or 120V/60Hz
  • Warm up time: approx. 7 min.
  • Fluid consumption at max. output: 120 ml/min.
  • Fluid consumption at continuous output: 35 ml/min.
  • Fluid tank capacity: 5 liter
  • Fog output adjustable in 99 steps
  • Output projection max.: 15 m
  • Fogging time at < 50% output: continuous output
  • Control: DMX 512
    0 - 10 Vanalog
    Stand-alone-Mode
    Radio remote (option)
  • Temperature control: Microprocessor controlled
  • Overheating protection: Heaterblock/Thermostat
    Pump/Thermal switch
  • Dimensions (L x W x H): 47 x 23 x 24 cm
  • Weight without bottle: approx. 8.6 kg

Advantages:

  • DMX as standard, analog and stand-alone-Mode
  • Internal timer
  • Easy handling
  • Powerful output
  • Fogging output adjustable in steps of 1% from 0 -99%
  • Continuous output
  • Easy bottle changing with quick-out connectors
Quick Fog Fluid (5L)
Look Solutions VI-3501 Quick Fog Fluid (5L)
For use with Viper and Orka fog machines.  Dissipates quickly.
Regular Fog Fluid (5L)
Look Solutions VI-3505 Regular Fog Fluid (5L)
For use with Viper and Orka fog machines.  Medium lasting duration.
ATA Case for Vipe NT/2.6
Look Solutions VI-1191 ATA Case for Vipe NT/2.6
ATA Case for the Viper NT and Viper 2.6.  The Viper can be fixed in the case with four screws.  Also includes a box for accesories in the lid. Dimensions (L x W x H): 56 x 27 x 36 cm
Usually ships in 7-14 business days.
Need it sooner? Call us!
Radio Remote
Look Solutions PT-1137 Radio Remote
Radio Remote (with 3-pin XLR plug Transmitter and receiver) for Unique2, Viper, Orka, and Cryo-Fog.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Hanging Set for Viper
Look Solutions VI-1192 Hanging Set for Viper
Hanging yoke for the Viper-series completely with collecting tray.  Ideal for hanging the machine on stages and for fixed installation in theaters and clubs.  The collecting tray can be fixed directly to the machine which helps ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Adapter,Ducting for Viper
Look Solutions VI-1193 Adapter,Ducting for Viper
Duct adapter for the Viper NT or 2.6 is fixed directly on the machine.  Hose diamter: 100mm
Usually ships in 7-14 business days.
Need it sooner? Call us!
XLR Remote
Look Solutions PT-1159 XLR Remote
The Look Solutions PT-1159 is an XLR remote that is compatible with their Power-Tiny, Unique, Viper NT, Viper 2.6, and the Orka. Cable sold separately.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Slow Fog Fluid (5L)
Look Solutions VI-3509 Slow Fog Fluid (5L)
For use with Viper and Orka fog machines.  Long lasting.
Please call for availability.
Tank Lid
Look Solutions VI-2121 Tank Lid
Tank lid for 2L and 10 L containers.  Usable with Unique 2, Viper, Orka and Cryo-Fog machines.
Usually ships in 7-14 business days.
Need it sooner? Call us!
XLR Cable 50ft
Look Solutions PT-1159C XLR Cable 50ft
Compatible with Unieque2, Viper, Orka, and Cyro-Fog.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM