Applied Microphone (AMT) WS
Double Condenser Microphone System for Clarinet, Oboe, Alto Flute & Bass Flute

OUR PART #  WS-AMT


AMT's WS is a low profile double condenser microphone that attaches to the clarinet, alto and bass flue, or oboe with an ultra-miniature low mass clamp. It is specifically designed for the timbre of the clarinet. The microphone provides pure tonal reproduction while being unobtrusive. It has an even reproduction of sound across the entire instrument. The AMT WS features a flexible gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive. The WS features one microphone at the bell and a second positioned over the keys to provide a truer reproduction for the instrument's tone quality.

The WS is terminated by a 3.5mm plug which connects to a belt pack preamp. The output is a predetermined mix balanced by the nature of the instrument. The included belt pack houses a volume control, contours the setup for the intended instrument, and powers the microphone system appropriately. A low-Z cable and case is included.

The AMT WS models including WSW, WS Studio, and the WS all come with TWO isolation rings now. Both microphones are suspended in AMT's iso-ring technology which allows more gain before feedback and less handling noise.

Includes:

  • AMT WS microphone
  • BP40 belt pack preamp
  • 1/4"-XLR cable
  • Hard shell Blo-mold protective case

Specifications:

  • Element: Condenser
  • Polar Pattern: Figure 8
  • Sensitivity: -68dB+ 4dB
  • Impedance: 150 ohms
  • Phantom Power: 12 to 52V DC or self-powered battery
  • Max Input SPL: 140dB
  • Dimension: 13" Flex Arm
  • Cable: 10 ft
  • Weight, mic only: 31 grams

Wireless Ability:
The AMT WS can be used with most major brand wireless belt pack transmitters and receivers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. When ordering the AMT Interface, be sure to know your wireless make, model, and pin out configuration. Interfaces are made to order.

Applied Microphone (AMT) WS
Double Condenser Microphone System for Clarinet, Oboe, Alto Flute & Bass Flute

OUR PART #  WS-AMT

Product Information:

AMT's WS is a low profile double condenser microphone that attaches to the clarinet, alto and bass flue, or oboe with an ultra-miniature low mass clamp. It is specifically designed for the timbre of the clarinet. The microphone provides pure tonal reproduction while being unobtrusive. It has an even reproduction of sound across the entire instrument. The AMT WS features a flexible gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive. The WS features one microphone at the bell and a second positioned over the keys to provide a truer reproduction for the instrument's tone quality.

The WS is terminated by a 3.5mm plug which connects to a belt pack preamp. The output is a predetermined mix balanced by the nature of the instrument. The included belt pack houses a volume control, contours the setup for the intended instrument, and powers the microphone system appropriately. A low-Z cable and case is included.

The AMT WS models including WSW, WS Studio, and the WS all come with TWO isolation rings now. Both microphones are suspended in AMT's iso-ring technology which allows more gain before feedback and less handling noise.

Includes:

  • AMT WS microphone
  • BP40 belt pack preamp
  • 1/4"-XLR cable
  • Hard shell Blo-mold protective case

Specifications:

  • Element: Condenser
  • Polar Pattern: Figure 8
  • Sensitivity: -68dB+ 4dB
  • Impedance: 150 ohms
  • Phantom Power: 12 to 52V DC or self-powered battery
  • Max Input SPL: 140dB
  • Dimension: 13" Flex Arm
  • Cable: 10 ft
  • Weight, mic only: 31 grams

Wireless Ability:
The AMT WS can be used with most major brand wireless belt pack transmitters and receivers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. When ordering the AMT Interface, be sure to know your wireless make, model, and pin out configuration. Interfaces are made to order.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM