Avantone CK-7
Large Diaphragm Multi-Pattern Condenser Microphone

OUR PART #  CK-7


The AVANTONE “Cabernet (C-series)” microphones from AVANT ELECTRONICS are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The AVANTONE CK-7 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to some of the very finest FET mics...but at a fraction of their cost.

Our rugged CK-7 microphone body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and grill. The transformer coupled Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs. Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility…It exudes class visually as well as sonically.

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile CK-7 mic is able to produce professional results with a warm, pleasing sonic character. The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. 3-Pattern CLASS A FET Microphone w/ dual 35mm gold sputtered thin Mylar capsules Includes -10 dB pad  &  80 Hz LF roll off switches.

Includes:

  • CK-7 Multi-Pattern FET Microphone
  • Custom Retro Shockmount
  • Elegant padded genuine wooden mic box
  • Padded aluminum storage/travel case
  • Owner's manual

Avantone CK-7 Specifications:

  • Type:  True Condenser
  • Polar Patterns:  Cardioid, Omnidirectional, Figure 8
  • Frequency Response:  20 Hz - 20 kHz +/-3dB
  • Output Impedance:  <=250 ohms
  • Maximum SPL:  139dB (0.5% THD @ 1kHz)
  • S/N Ratio re 1Pa:  75dB
  • Output Connector:  Male XLR 3 pin
  • High-Pass Switch:  80Hz 6dB/octave
  • Attenuation Switch:  -10dB
  • Power Requirement:  Standard 48V Phantom
  • Finish:  Polished nickel trim, metallic cabernet red body
  • Weight:  1.4 lbs
  • Dimensions:  7.5" x 2"

Avantone CK-7
Large Diaphragm Multi-Pattern Condenser Microphone

OUR PART #  CK-7

Product Information:

The AVANTONE “Cabernet (C-series)” microphones from AVANT ELECTRONICS are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The AVANTONE CK-7 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to some of the very finest FET mics...but at a fraction of their cost.

Our rugged CK-7 microphone body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and grill. The transformer coupled Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs. Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility…It exudes class visually as well as sonically.

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile CK-7 mic is able to produce professional results with a warm, pleasing sonic character. The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. 3-Pattern CLASS A FET Microphone w/ dual 35mm gold sputtered thin Mylar capsules Includes -10 dB pad  &  80 Hz LF roll off switches.

Includes:

  • CK-7 Multi-Pattern FET Microphone
  • Custom Retro Shockmount
  • Elegant padded genuine wooden mic box
  • Padded aluminum storage/travel case
  • Owner's manual

Avantone CK-7 Specifications:

  • Type:  True Condenser
  • Polar Patterns:  Cardioid, Omnidirectional, Figure 8
  • Frequency Response:  20 Hz - 20 kHz +/-3dB
  • Output Impedance:  <=250 ohms
  • Maximum SPL:  139dB (0.5% THD @ 1kHz)
  • S/N Ratio re 1Pa:  75dB
  • Output Connector:  Male XLR 3 pin
  • High-Pass Switch:  80Hz 6dB/octave
  • Attenuation Switch:  -10dB
  • Power Requirement:  Standard 48V Phantom
  • Finish:  Polished nickel trim, metallic cabernet red body
  • Weight:  1.4 lbs
  • Dimensions:  7.5" x 2"
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM