Avantone CK-6
Large Diaphragm Condenser Microphone, Cardioid

OUR PART #  CK-6


The AVANTONE “Cabernet (C-series)” mics from AVANT ELECTRONICS are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The AVANTONE CK-6 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics...but at a fraction of their cost.

The rugged CK-6 microphone body and capsule assembly are precision machined of brass. Aesthetically the compact body  features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and grill. The transformerless Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.

Includes:

  • CK-6 Cardioid FET Microphone
  • Custom Retro Shockmount
  • Elegant padded genuine wooden mic box
  • Padded aluminum storage/travel case
  • Owners manual

Avantone CK-6 Features:

  • The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics.
  • The 80Hz HIGH-PASS filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from “muddying up” the track.
  • Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
  • The versatile CK-6 mic is able to produce professional resultswith a clean sonic character.
  • The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
  • Transformerless CLASS A FET Microphone w/32mm gold sputtered thin Mylar capsule
  • -10 dB pad  &  80 Hz LF roll off switches

Avantone CK-6 Specifications:

  • Type:  True transformerless condenser
  • Polar Pattern:  Cardioid
  • Frequency Response:  35 Hz - 20 kHz +/-3.5dB
  • Output Impedance:  <=200 ohms
  • Maximum SPL:  136dB (0.5% THD @ 1kHz)
  • Equivalent Noise Level:  <17dB
  • Output Connector:  Male XLR 3 pin
  • High Pass Switch:  80Hz -6dB/octave
  • Attenuation Switch:  -10dB
  • Power Requirement:  48V Phantom power
  • Finish:  Polished nickel trim, metallic cabernet red body

Avantone CK-6
Large Diaphragm Condenser Microphone, Cardioid

OUR PART #  CK-6

Product Information:

The AVANTONE “Cabernet (C-series)” mics from AVANT ELECTRONICS are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The AVANTONE CK-6 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics...but at a fraction of their cost.

The rugged CK-6 microphone body and capsule assembly are precision machined of brass. Aesthetically the compact body  features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and grill. The transformerless Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.

Includes:

  • CK-6 Cardioid FET Microphone
  • Custom Retro Shockmount
  • Elegant padded genuine wooden mic box
  • Padded aluminum storage/travel case
  • Owners manual

Avantone CK-6 Features:

  • The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics.
  • The 80Hz HIGH-PASS filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from “muddying up” the track.
  • Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
  • The versatile CK-6 mic is able to produce professional resultswith a clean sonic character.
  • The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
  • Transformerless CLASS A FET Microphone w/32mm gold sputtered thin Mylar capsule
  • -10 dB pad  &  80 Hz LF roll off switches

Avantone CK-6 Specifications:

  • Type:  True transformerless condenser
  • Polar Pattern:  Cardioid
  • Frequency Response:  35 Hz - 20 kHz +/-3.5dB
  • Output Impedance:  <=200 ohms
  • Maximum SPL:  136dB (0.5% THD @ 1kHz)
  • Equivalent Noise Level:  <17dB
  • Output Connector:  Male XLR 3 pin
  • High Pass Switch:  80Hz -6dB/octave
  • Attenuation Switch:  -10dB
  • Power Requirement:  48V Phantom power
  • Finish:  Polished nickel trim, metallic cabernet red body
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM