Avantone CK-40
Stereo FET Microphone with Case & Mount

OUR PART #  CK-40


The Avantone "Cabernet (C-series)" mics from Avant Electronics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics.

The Avantone CK-40 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to some of the world's veyr finest stereo FET mics; but at a fraction of their cost.

The rugged CK-40 microphone body and capsule assemblies are precision machined of brass.

Aesthetically, it features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and plated steel grills.

The discreet class A low-noise FET circuitry will yield pleasing professional results comparable to much more expensive designs.

Any studio can proudly offer the Stereo CK-40 as a group vocal mic, room mic, piano mic, or utility condenser due to its versatility. It exudes class visually as well as sonically.

The versatile Avantone CK-40 stereo class A FET microphone features twin large 35mm center-terminated pressure gradient transducers. Their close physical proximity places them in a tight vertical array to allow accurage stereo imaging without phase issues arising. The top capsule/grill assembly rotates up to 180 degrees relative to the lower capsule/grill assembly. This feature along with the multi-pattern independent selector choices allow for all stereo recording techniques to be utilized. (XY-Coincident/Blumlein, M-S)

The 2 sets of pad, pattern select & LF rolloff switches independently control the capsules. Front switches control the lower fixed grill/capsule while the rear switches control the upper rotating headgrill.

The CK-40 operates on standard 48 volt phantom power and includes a 5-pin mic cable that plugs into the included 1x2 stereo splitter box. Two standard XLR mic cables are then all that is required to connect to a phantom powered mic preamp/console channel.

Uses Include:

  • Studio group vocals, acoustic guitar, mandolin, drum overheads, piano,room mic, etc.
  • The 3 patterns allow the CK-40 to be used in a variety of situationsincluding M-S recording
  • The -10dB attenuation switch can be engaged when micing very high SPLsources to keep from overloading the electronics
  • The 80Hz high-pass filter switch can be engaged to reduce rumble and tokeep unwanted low frequencies from "muddying up" the track

Avantone CK-40 Includes:

  • Avantone CK-40 multi-pattern stereo FET microphone
  • Avantone custom retro shockmount
  • Padded, zippered mic pouch
  • 1x2 splitter box
  • 30' 5-pin cable
  • Foam wind filter
  • Padded aluminum storage/travel case
  • Owners manual

Avantone CK-40 Features:

  • Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability
  • Extra large dual 35mm center-terminated Euro style capsules
  • The versatile stereo CK-40 mic is able to produce professional results with a warm, pleasing sonic character
  • The included Custom Retro Shockmount is superb in allowing a precisepositioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results
  • 3-pattern Class A FET microphone with dual 35mm gold sputtered thin Mylar capsules
  • -10dB pad & 80Hz LF roll off switches

Avantone CK-40 Specifications:

  • Type: Stereo true condenser microphone
  • Polar Patterns: Cardioid, Omni, Figure 8 (x2)
  • Capsules: (2) Dual plate 35mm gold sputtered diaphragm/brass assembly
  • Frequency Response: 20-20,000 Hz +/-3dB
  • Rated Output Impedance: <=200 ohms
  • Maximum SPL: 147dB (0.5% THD @ 1000Hz)
  • Sensitivity: -40dB
  • Noise Level: 17dB (A weighted EC651)
  • S/N Ratio re 1Pa: 77dB
  • Output Connector: Male XLR 5-pin
  • High-Pass Switch: 80Hz 6dB/octave
  • Attenuation Switch: -10dB
  • Included Accessories: Mic pouch, shockmount, foam filter, 2x1 splitterbox, 30' cable, metal road case
  • Power Requirement: Standard 48 Volt Phantom (x2) 3mA current consumption
  • Size: 10 7/8" x 1 15/16"
  • Weight: 2.1 lbs
  • Finish: Polished Nickel trim/Metallic Cabernet Red Body

Avantone CK-40
Stereo FET Microphone with Case & Mount

OUR PART #  CK-40

Product Information:

The Avantone "Cabernet (C-series)" mics from Avant Electronics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics.

The Avantone CK-40 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to some of the world's veyr finest stereo FET mics; but at a fraction of their cost.

The rugged CK-40 microphone body and capsule assemblies are precision machined of brass.

Aesthetically, it features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and plated steel grills.

The discreet class A low-noise FET circuitry will yield pleasing professional results comparable to much more expensive designs.

Any studio can proudly offer the Stereo CK-40 as a group vocal mic, room mic, piano mic, or utility condenser due to its versatility. It exudes class visually as well as sonically.

The versatile Avantone CK-40 stereo class A FET microphone features twin large 35mm center-terminated pressure gradient transducers. Their close physical proximity places them in a tight vertical array to allow accurage stereo imaging without phase issues arising. The top capsule/grill assembly rotates up to 180 degrees relative to the lower capsule/grill assembly. This feature along with the multi-pattern independent selector choices allow for all stereo recording techniques to be utilized. (XY-Coincident/Blumlein, M-S)

The 2 sets of pad, pattern select & LF rolloff switches independently control the capsules. Front switches control the lower fixed grill/capsule while the rear switches control the upper rotating headgrill.

The CK-40 operates on standard 48 volt phantom power and includes a 5-pin mic cable that plugs into the included 1x2 stereo splitter box. Two standard XLR mic cables are then all that is required to connect to a phantom powered mic preamp/console channel.

Uses Include:

  • Studio group vocals, acoustic guitar, mandolin, drum overheads, piano,room mic, etc.
  • The 3 patterns allow the CK-40 to be used in a variety of situationsincluding M-S recording
  • The -10dB attenuation switch can be engaged when micing very high SPLsources to keep from overloading the electronics
  • The 80Hz high-pass filter switch can be engaged to reduce rumble and tokeep unwanted low frequencies from "muddying up" the track

Avantone CK-40 Includes:

  • Avantone CK-40 multi-pattern stereo FET microphone
  • Avantone custom retro shockmount
  • Padded, zippered mic pouch
  • 1x2 splitter box
  • 30' 5-pin cable
  • Foam wind filter
  • Padded aluminum storage/travel case
  • Owners manual

Avantone CK-40 Features:

  • Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability
  • Extra large dual 35mm center-terminated Euro style capsules
  • The versatile stereo CK-40 mic is able to produce professional results with a warm, pleasing sonic character
  • The included Custom Retro Shockmount is superb in allowing a precisepositioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results
  • 3-pattern Class A FET microphone with dual 35mm gold sputtered thin Mylar capsules
  • -10dB pad & 80Hz LF roll off switches

Avantone CK-40 Specifications:

  • Type: Stereo true condenser microphone
  • Polar Patterns: Cardioid, Omni, Figure 8 (x2)
  • Capsules: (2) Dual plate 35mm gold sputtered diaphragm/brass assembly
  • Frequency Response: 20-20,000 Hz +/-3dB
  • Rated Output Impedance: <=200 ohms
  • Maximum SPL: 147dB (0.5% THD @ 1000Hz)
  • Sensitivity: -40dB
  • Noise Level: 17dB (A weighted EC651)
  • S/N Ratio re 1Pa: 77dB
  • Output Connector: Male XLR 5-pin
  • High-Pass Switch: 80Hz 6dB/octave
  • Attenuation Switch: -10dB
  • Included Accessories: Mic pouch, shockmount, foam filter, 2x1 splitterbox, 30' cable, metal road case
  • Power Requirement: Standard 48 Volt Phantom (x2) 3mA current consumption
  • Size: 10 7/8" x 1 15/16"
  • Weight: 2.1 lbs
  • Finish: Polished Nickel trim/Metallic Cabernet Red Body
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.