Bogen Communications HFCS1LP
6 inch High-Fidelity 75 Watt Ceiling Speaker, White

OUR PART #  HFCS1-LP

Log In for price!

Don't have an account? Apply today!

The Bogen HFCS1LP ceiling loudspeaker delivers superior sound and clear intelligibility in a variety of ceiling environments.

The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions.

The Bogen HFCS1LP speaker offers several levels of power output controlled via a front-mounted rotary tap selector switch (under grille). The low-distortion speaker design, coupled with a computer-matched venting system, delivers high intelligibility and exceptional low-frequency response for both music and speech reinforcement.

Bogen Communications HFCS1LP Features:

  • Wide-dispersion coaxial driver for broad, even coverage
  • Good off-axis response with smooth contouring
  • Computer-matched venting system for full bass output
  • Low-profile housing allows greater range of installations
  • High power handling capability for foreground sound
  • Selectable power taps via front-mounted control
  • Power taps (in watts):  32, 16, 8, 4, 2, and 1for70V; 32, 16, 8, 4, and 2 for 100V
  • 16-ohm input for non-transformer, multi-speaker systems(selectable via tap selector switch)
  • Compounded rubber surround, plus polypropylene and polycarbonate drivers for lasting performance
  • Easy wiring with plug-in connector
  • Integral swing-out clamps for easy installation
  • Connector provides loop-through terminals for the next speaker
  • Attachment point for seismic cable (safety cable)
  • Input terminal cover with knockouts and safety eyelet provides protection for connections
  • Off-White textured finish easily painted to match theme decor
  • Attractive, contemporary, sturdy steel grille assembly with fine perforations
  • Listed to UL Standard 60065 for US and Canada
  • Independently tested and meets requirements of UL-2043 (report available)
  • Accessory tile bridge support ring (Model TBCR, solds eparately)
  • Accessory 10-foot long cable kit (Model CK10, sold separately)

Bogen Communications HFCS1LP Specifications:

  • Frequency Response (-10 dB, Half-Space Response):  78 Hz to 19 kHz
  • LF Driver:  6-1/2" (165mm) Polypropylene Cone
  • HF Driver:  3/4" (20mm) Polycarbonate Dome
  • Sensitivity (1W/1m):  89 dBspl (Average 100 Hz -10 kHz)
  • Impedance Ratings:  Low (16 ohms) / High (70V/100V)
  • Power Input (Max.):  75W @ 16 ohms; 32W @ 70V/100V
  • Power Settings (in watts, Front panel, switch-selected):  70V - 32, 16, 8, 4, 2, 1; 100V - 32, 16, 8, 4, 2
  • Baffle Material:  Fire-rated (94VO) ABS
  • Back Can Material:  Heavy-Gauge Plated Steel
  • Terminations:  4 Terminal Plug-in Input Connector
  • Product Weight:  7-3/4 lb.
  • Speaker Dimensions:  12-5/16" dia. x 7-3/4" D
  • Minimum Vertical Clearance Requirement:  6-3/4"
  • Included Accessories:  Input Terminal Cover (2 Halves); (4) Screws; (1) Plug-in Input Connector
  • Optional Accessories:  Tile Bridge Support Ring (TBCR); Cable Kit (CK10)
  • Baffle Ring & Grille Color:  Off-white

NOTES:  Image shown above is for illustrative purposes only; actual product comes in white. For full specifications on this product, refer to attached Specification Sheet under the Documentation Tab.

Bogen Communications HFCS1LP
6 inch High-Fidelity 75 Watt Ceiling Speaker, White

OUR PART #  HFCS1-LP

Product Information:

The Bogen HFCS1LP ceiling loudspeaker delivers superior sound and clear intelligibility in a variety of ceiling environments.

The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions.

The Bogen HFCS1LP speaker offers several levels of power output controlled via a front-mounted rotary tap selector switch (under grille). The low-distortion speaker design, coupled with a computer-matched venting system, delivers high intelligibility and exceptional low-frequency response for both music and speech reinforcement.

Bogen Communications HFCS1LP Features:

  • Wide-dispersion coaxial driver for broad, even coverage
  • Good off-axis response with smooth contouring
  • Computer-matched venting system for full bass output
  • Low-profile housing allows greater range of installations
  • High power handling capability for foreground sound
  • Selectable power taps via front-mounted control
  • Power taps (in watts):  32, 16, 8, 4, 2, and 1for70V; 32, 16, 8, 4, and 2 for 100V
  • 16-ohm input for non-transformer, multi-speaker systems(selectable via tap selector switch)
  • Compounded rubber surround, plus polypropylene and polycarbonate drivers for lasting performance
  • Easy wiring with plug-in connector
  • Integral swing-out clamps for easy installation
  • Connector provides loop-through terminals for the next speaker
  • Attachment point for seismic cable (safety cable)
  • Input terminal cover with knockouts and safety eyelet provides protection for connections
  • Off-White textured finish easily painted to match theme decor
  • Attractive, contemporary, sturdy steel grille assembly with fine perforations
  • Listed to UL Standard 60065 for US and Canada
  • Independently tested and meets requirements of UL-2043 (report available)
  • Accessory tile bridge support ring (Model TBCR, solds eparately)
  • Accessory 10-foot long cable kit (Model CK10, sold separately)

Bogen Communications HFCS1LP Specifications:

  • Frequency Response (-10 dB, Half-Space Response):  78 Hz to 19 kHz
  • LF Driver:  6-1/2" (165mm) Polypropylene Cone
  • HF Driver:  3/4" (20mm) Polycarbonate Dome
  • Sensitivity (1W/1m):  89 dBspl (Average 100 Hz -10 kHz)
  • Impedance Ratings:  Low (16 ohms) / High (70V/100V)
  • Power Input (Max.):  75W @ 16 ohms; 32W @ 70V/100V
  • Power Settings (in watts, Front panel, switch-selected):  70V - 32, 16, 8, 4, 2, 1; 100V - 32, 16, 8, 4, 2
  • Baffle Material:  Fire-rated (94VO) ABS
  • Back Can Material:  Heavy-Gauge Plated Steel
  • Terminations:  4 Terminal Plug-in Input Connector
  • Product Weight:  7-3/4 lb.
  • Speaker Dimensions:  12-5/16" dia. x 7-3/4" D
  • Minimum Vertical Clearance Requirement:  6-3/4"
  • Included Accessories:  Input Terminal Cover (2 Halves); (4) Screws; (1) Plug-in Input Connector
  • Optional Accessories:  Tile Bridge Support Ring (TBCR); Cable Kit (CK10)
  • Baffle Ring & Grille Color:  Off-white

NOTES:  Image shown above is for illustrative purposes only; actual product comes in white. For full specifications on this product, refer to attached Specification Sheet under the Documentation Tab.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM