RTS SAP-612
Source Assignment Panel (RTS Catalog #: 9000687200)

OUR PART #  SAP612

Log In for price!

Don't have an account? Apply today!

RTS' SAP-612 source assign panel independently assigns each of 24 TW channels (12 two-channel TW user station strings) to any one of six busses, communication channels. All channels assigned to a common buss channel can intercommunicate and exchange call signals. One to three TW power supplies (such as models PS-31 or PS-15) may be conveniently connected to the SAP-612 to distribute power to the intercom stations. Alternatively, the SAP-612 may be used with a non-TW power source. Switchable 200 ohm line terminations are built into the SAP-612 for proper line termination when using a non-TW power source. The SAP-612 has two balanced, transformer isolated program inputs. Program 1 is permanently assigned to buss channel 5, and program 2 is permanently assigned to buss channel 6.

Specifications:

  • Maximum Switch Carrying Current: 1 amp/output
  • Maximum Switch Breaking Current: 0.5 amp/output
  • Inputs:
    Full duplex lines (busses): 6
    Program Inputs: 2
  • Outputs (2 channel):
  • User Station Strings: 12
  • Program Inputs:
    Impedance: 600 ohms
    Level: 0 dBm
  • Power Requirements: No external power required; Power distributed from RTS® Systems power supplies PS-15 or PS-31 connected at rear panel of SAP-612.
  • Dimensions: 1.72" (44 mm) high, 19" (483 mm) wide 8" (20.1mm) deep (Allow another 4" (102 mm) depth for cables on rear panel)
  • Weight: 4.5 lbs.
  • Finish: Gray

RTS SAP-612
Source Assignment Panel (RTS Catalog #: 9000687200)

OUR PART #  SAP612

Product Information:

RTS' SAP-612 source assign panel independently assigns each of 24 TW channels (12 two-channel TW user station strings) to any one of six busses, communication channels. All channels assigned to a common buss channel can intercommunicate and exchange call signals. One to three TW power supplies (such as models PS-31 or PS-15) may be conveniently connected to the SAP-612 to distribute power to the intercom stations. Alternatively, the SAP-612 may be used with a non-TW power source. Switchable 200 ohm line terminations are built into the SAP-612 for proper line termination when using a non-TW power source. The SAP-612 has two balanced, transformer isolated program inputs. Program 1 is permanently assigned to buss channel 5, and program 2 is permanently assigned to buss channel 6.

Specifications:

  • Maximum Switch Carrying Current: 1 amp/output
  • Maximum Switch Breaking Current: 0.5 amp/output
  • Inputs:
    Full duplex lines (busses): 6
    Program Inputs: 2
  • Outputs (2 channel):
  • User Station Strings: 12
  • Program Inputs:
    Impedance: 600 ohms
    Level: 0 dBm
  • Power Requirements: No external power required; Power distributed from RTS® Systems power supplies PS-15 or PS-31 connected at rear panel of SAP-612.
  • Dimensions: 1.72" (44 mm) high, 19" (483 mm) wide 8" (20.1mm) deep (Allow another 4" (102 mm) depth for cables on rear panel)
  • Weight: 4.5 lbs.
  • Finish: Gray
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM