Electro-Voice ZX1 90W
8" 2-Way Speaker in White

OUR PART #  ZX1-90W


200 watt 8" two-way speaker system with EV DH2005 hi-frequency compression driver. 2 NL4 connectors. 90x50 coverage pattern with rotatable waveguide. Includes integrated pole mount, carrying slot and rubber feet. Black high impact polymer cabinet.

The Electro-Voice ZX1 is the new standard of no compromise audio performance and versatility for compact sound reinforcement.

The high-tech enclosure is lightweight and extremely durable. The enclosure geometery has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low frequency response withtout vent noise. The ZX1's long excursion, high output 8" woofer with a weatherized treated cone delivers smooth low frequency performance with exceptional reliability.

NOTE: Though two are shown above, only ONE speaker is sold per purchase of one unit.

A sophisticated crossover network integrates it with the EV DH2005, a 1" exit true compression driver with extended frequency response and high output capability. Full-bandwidth overload protection is provided for reliable, long term operation without audible effect.

Electro-Voice ZX1 90W Features:

  • Extremely smooth, wide frequency response
  • Attractive, clean design with full grille
  • Rotatable horn design
  • Integral Monitor Angle on Enclosure

Electro-Voice ZX1 90W Specifications:

  • Frequency Response: 60Hz - 20kHz
  • Axial Sensitivity: 94 dB (1W/1m)
  • Maximum Calculated SPL: 123 dB
  • Horizontal Coverage: 90° or 50°
  • Vertical Coverage: 50° or 90°
  • System Power Handling: 200W continuous, 400W program
  • LF Transducer: EV8L, 8" Driver
  • HF Transducer: DH2005, 1" Exit Compression Driver
  • Nominal Impedance: 8 ohms
  • Pole Mount: Included
  • Connectors: Two NL4 Connectors
  • Overload Protection: Full protection - all modes
  • Mounting System: Four M8 studs on bottom of speaker
  • Built-in Monitor Angle: Yes
  • Dimensions (HxWxD): 17.75" x 11.12" x 10.35"
  • Weight:
    • Net: 18.5 lbs
    • Shipping: 22.5 lbs
Speaker Mounting Plate, Single, for EV ZX1 Series
Electro-Voice MP1-B Speaker Mounting Plate, Single, for EV ZX1 Series
Includes spacers, detachable hang points, and eye bolts.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Speaker Carrying Bag for EV ZX1 Series
Electro-Voice CB1 Speaker Carrying Bag for EV ZX1 Series
Includes shoulder strap and accessory pockets. Two can be combined for carrying two speakers at once.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Forged 3/8-16 Eyebolt Kit, 3-pack
Electro-Voice EBK-3 Forged 3/8-16 Eyebolt Kit, 3-pack
The Electro-Voice EBK-3 is a 3-pack forged 3/8-16 eyebolt kit.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Speaker Slip Cover with Drawstring ZX1 Series Speakers
Electro-Voice SC-ZX1 Speaker Slip Cover with Drawstring ZX1 Series Speakers
Electro-Voice's SC-ZX1 is a Speaker Slip Cover with Drawstring for use with their ZX1 Series speakers.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Electro-Voice ZX1 90W
8" 2-Way Speaker in White

OUR PART #  ZX1-90W

Product Information:

200 watt 8" two-way speaker system with EV DH2005 hi-frequency compression driver. 2 NL4 connectors. 90x50 coverage pattern with rotatable waveguide. Includes integrated pole mount, carrying slot and rubber feet. Black high impact polymer cabinet.

The Electro-Voice ZX1 is the new standard of no compromise audio performance and versatility for compact sound reinforcement.

The high-tech enclosure is lightweight and extremely durable. The enclosure geometery has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low frequency response withtout vent noise. The ZX1's long excursion, high output 8" woofer with a weatherized treated cone delivers smooth low frequency performance with exceptional reliability.

NOTE: Though two are shown above, only ONE speaker is sold per purchase of one unit.

A sophisticated crossover network integrates it with the EV DH2005, a 1" exit true compression driver with extended frequency response and high output capability. Full-bandwidth overload protection is provided for reliable, long term operation without audible effect.

Electro-Voice ZX1 90W Features:

  • Extremely smooth, wide frequency response
  • Attractive, clean design with full grille
  • Rotatable horn design
  • Integral Monitor Angle on Enclosure

Electro-Voice ZX1 90W Specifications:

  • Frequency Response: 60Hz - 20kHz
  • Axial Sensitivity: 94 dB (1W/1m)
  • Maximum Calculated SPL: 123 dB
  • Horizontal Coverage: 90° or 50°
  • Vertical Coverage: 50° or 90°
  • System Power Handling: 200W continuous, 400W program
  • LF Transducer: EV8L, 8" Driver
  • HF Transducer: DH2005, 1" Exit Compression Driver
  • Nominal Impedance: 8 ohms
  • Pole Mount: Included
  • Connectors: Two NL4 Connectors
  • Overload Protection: Full protection - all modes
  • Mounting System: Four M8 studs on bottom of speaker
  • Built-in Monitor Angle: Yes
  • Dimensions (HxWxD): 17.75" x 11.12" x 10.35"
  • Weight:
    • Net: 18.5 lbs
    • Shipping: 22.5 lbs
Speaker Mounting Plate, Single, for EV ZX1 Series
Electro-Voice MP1-B Speaker Mounting Plate, Single, for EV ZX1 Series
Includes spacers, detachable hang points, and eye bolts.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Speaker Carrying Bag for EV ZX1 Series
Electro-Voice CB1 Speaker Carrying Bag for EV ZX1 Series
Includes shoulder strap and accessory pockets. Two can be combined for carrying two speakers at once.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Forged 3/8-16 Eyebolt Kit, 3-pack
Electro-Voice EBK-3 Forged 3/8-16 Eyebolt Kit, 3-pack
The Electro-Voice EBK-3 is a 3-pack forged 3/8-16 eyebolt kit.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Speaker Slip Cover with Drawstring ZX1 Series Speakers
Electro-Voice SC-ZX1 Speaker Slip Cover with Drawstring ZX1 Series Speakers
Electro-Voice's SC-ZX1 is a Speaker Slip Cover with Drawstring for use with their ZX1 Series speakers.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM