Beyerdynamic DT 290 MK II 200/80
200 Ohm Headset with 80 Ohm Microphone without Cable

OUR PART #  DT290-MKII-200/80


The lightweight, closed headset DT 290 is ideally suited for broadcasting applications. The headphone features an efficient neodymium magnet system, very high precision reproduction and a balanced sound. Another special feature is the wide transmission range of 10 Hz - 30 kHz.

The soft circumaural earcups and the fully adjustable padded headband are extremely comfortable. The dynamic microphone can be optimally positioned with the flexible gooseneck. The hypercardioid polar pattern guarantees an extremely high-gain-before feedback and noise cancellation. If necessary the assembly of the microphone holder can be changed so that the microphone can be worn on the left or right side (in the factory it is assembled on the left side). The cables to the earcups and the microphone run safely in the headband. The connecting cable is single-sided, plug-in type with a golden combi 1/4"-mini jack plug. All parts such as ear pads, headband and gooseneck microphone are easy to replace.

Features:

  • Lightweight, low profile design
  • Reference quality, closed ear monitors
  • High suppression of ambient noise
  • Soft, circumaural ear pad
  • Noise cancelling microphone
  • Dynamic, hypercardioid microphone capsule
  • Very high gain-before-feedback
  • Flexible gooseneck for optimal positioning
  • Noise cancelling microphone
  • Single exit, plug-in cable assembly
  • All DT 290 versions are supplied withoutconnecting cable. Please order the appropriate connecting cableseparately

Headphone Specifications:

  • Transducer Principle: Dynamic
  • Operating Principle: Closed
  • Transmission Range: 10 Hz - 30 kHz
  • Nominal Impedance: 80 ohms system
  • Nominal SPL at 1 kHz: 100 dB SPL at 1 mW = 0.28V to 80 ohms
  • T.H.D.: <0.2%
  • Nominal Power Rating: 100 mW = 120 dB = 2.8 V to 80 ohms
  • Ambient Noise Insulation: approx. 16 dBA
  • Average Pressure on Ears: 4.5 N
  • Weight without cable: 240 g

Microphone Specifications:

  • Transducer Principle: Dynamic
  • Transmission Range: 40 Hz - 12 kHz
  • Polar Pattern: Hypercardioid
  • Output Voltage at a distance of 5 cm: approx. 3 mV
  • Nominal Impedance: 200 ohms
  • Nominal Output Impedance: > 1000 ohms
Cable for DT 190 and 290 Series, 5-pin XLRM, 1.5m
Beyerdynamic K190.41 Cable for DT 190 and 290 Series, 5-pin XLRM, 1.5m
Connecting cable for DT 190 and 290 series with 5 pin XLR male.
Cable for DT 190 Series, Split 3-pin XLRM & 1/4", 1.5m
Beyerdynamic K190.40 Cable for DT 190 Series, Split 3-pin XLRM & 1/4", 1.5m
Connecting cable for DT 190-series with 3 pin XLR male and 1/4" jack plug. 1.5m length.
Cable for DT 190 and DT 290 Series, 4-pin XLRF, 1.5m
Beyerdynamic K190.28 Cable for DT 190 and DT 290 Series, 4-pin XLRF, 1.5m
Connecting cable for DT 190 and DT 290 series with 4 pin XLR female. 1.5m length.
5-FT STRAIGHT CABLE/DT180/190
Beyerdynamic K190.00 5-FT STRAIGHT CABLE/DT180/190
Connecting cable for DT 190 and DT 290 series with free ends. 1.5m length.
Cable for Beyer DT190/180/280/290, 10 ft
Beyerdynamic K190.40-10FT Cable for Beyer DT190/180/280/290, 10 ft
Connecting cable for DT 190/290 series with 3-pin XLR male and 1/4" jack plug, 3m length.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Beyerdynamic DT 290 MK II 200/80
200 Ohm Headset with 80 Ohm Microphone without Cable

OUR PART #  DT290-MKII-200/80

Product Information:

The lightweight, closed headset DT 290 is ideally suited for broadcasting applications. The headphone features an efficient neodymium magnet system, very high precision reproduction and a balanced sound. Another special feature is the wide transmission range of 10 Hz - 30 kHz.

The soft circumaural earcups and the fully adjustable padded headband are extremely comfortable. The dynamic microphone can be optimally positioned with the flexible gooseneck. The hypercardioid polar pattern guarantees an extremely high-gain-before feedback and noise cancellation. If necessary the assembly of the microphone holder can be changed so that the microphone can be worn on the left or right side (in the factory it is assembled on the left side). The cables to the earcups and the microphone run safely in the headband. The connecting cable is single-sided, plug-in type with a golden combi 1/4"-mini jack plug. All parts such as ear pads, headband and gooseneck microphone are easy to replace.

Features:

  • Lightweight, low profile design
  • Reference quality, closed ear monitors
  • High suppression of ambient noise
  • Soft, circumaural ear pad
  • Noise cancelling microphone
  • Dynamic, hypercardioid microphone capsule
  • Very high gain-before-feedback
  • Flexible gooseneck for optimal positioning
  • Noise cancelling microphone
  • Single exit, plug-in cable assembly
  • All DT 290 versions are supplied withoutconnecting cable. Please order the appropriate connecting cableseparately

Headphone Specifications:

  • Transducer Principle: Dynamic
  • Operating Principle: Closed
  • Transmission Range: 10 Hz - 30 kHz
  • Nominal Impedance: 80 ohms system
  • Nominal SPL at 1 kHz: 100 dB SPL at 1 mW = 0.28V to 80 ohms
  • T.H.D.: <0.2%
  • Nominal Power Rating: 100 mW = 120 dB = 2.8 V to 80 ohms
  • Ambient Noise Insulation: approx. 16 dBA
  • Average Pressure on Ears: 4.5 N
  • Weight without cable: 240 g

Microphone Specifications:

  • Transducer Principle: Dynamic
  • Transmission Range: 40 Hz - 12 kHz
  • Polar Pattern: Hypercardioid
  • Output Voltage at a distance of 5 cm: approx. 3 mV
  • Nominal Impedance: 200 ohms
  • Nominal Output Impedance: > 1000 ohms
Cable for DT 190 and 290 Series, 5-pin XLRM, 1.5m
Beyerdynamic K190.41 Cable for DT 190 and 290 Series, 5-pin XLRM, 1.5m
Connecting cable for DT 190 and 290 series with 5 pin XLR male.
Cable for DT 190 Series, Split 3-pin XLRM & 1/4", 1.5m
Beyerdynamic K190.40 Cable for DT 190 Series, Split 3-pin XLRM & 1/4", 1.5m
Connecting cable for DT 190-series with 3 pin XLR male and 1/4" jack plug. 1.5m length.
Cable for DT 190 and DT 290 Series, 4-pin XLRF, 1.5m
Beyerdynamic K190.28 Cable for DT 190 and DT 290 Series, 4-pin XLRF, 1.5m
Connecting cable for DT 190 and DT 290 series with 4 pin XLR female. 1.5m length.
5-FT STRAIGHT CABLE/DT180/190
Beyerdynamic K190.00 5-FT STRAIGHT CABLE/DT180/190
Connecting cable for DT 190 and DT 290 series with free ends. 1.5m length.
Cable for Beyer DT190/180/280/290, 10 ft
Beyerdynamic K190.40-10FT Cable for Beyer DT190/180/280/290, 10 ft
Connecting cable for DT 190/290 series with 3-pin XLR male and 1/4" jack plug, 3m length.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM