Yamaha IF2108W
Speaker 2way 8" Full Range Passive White

OUR PART #  IF2108W


Yamaha Installation Series Loudspeakers

The Installation Series provides a wide range of models with seamlessly integrated hardware to meet the expectations of contractors and end-users for audio quality, ease of installation, and system design. All models feature a phase differential of less than 90 at 2 kHz . This minimizes the reduction of sound level and unwanted coloration in the "overlapped" area when combining/arraying speakers. The overall effect on frequency response is held to a minimum, ensuring a consistent family sound of speakers.

Selected Features:

  • Ideal for medium to large-scale installations.
  • Uniform phase response throughout the entire series.
  • A wide selection of dispersion characteristics for long-range, shortrange, and long/short range use.
  • Standard U-bracket and array-frame hardware available for maximuminstallation convenience and efficiency.
  • Switchable single-amp and bi-amp drive modes.
  • Certified measurement and prediction EASE data. Including polar plots, CADfiles, and DXF data.
  • Constructed of high strength premium 11-ply / 5/8 inch-thick Finland Birchenclosures on most models.
  • Grilles have 63% transparency for better clarity of sound.
  • Speakers include a barrier-strip and NL4 Neutrik* with parallelconnections.
  • Horns are manufactured from fiber-reinforced plastic to minimize unwantedresonance.
  • The entire line of speakers incorporates rotatable horns, when spaceconsideration dictates the speakers orientation.
  • High frequency drivers feature one-piece titanium diaphragms formedtoprecision tolerances for high performance, endurance and superiorsonicquality.

Specifications:

  • Frequency Response: 75 Hz – 18 kHz
  • Frequency Range: 55 Hz – 19 kHz
  • Nominal Coverage (H xV. -6dB): 90 deg. X 60 deg
  • Power Rating: 100 W (EIA)
  • Nominal Impedance: 8 ohms
  • Sensitivity (1 W @ 1 m): 95 dB SPL
  • Calculated Peak SPL: 121 dB SPL
  • Calculated Continuous SPL: 115 dB SPL
  • LF Component: 8" Woofer, 2" Voice Coil
  • HF Component: Rotatable Constant Directivity Horn, 1" exit, 1.7" VoiceCoil Compression Driver
  • Dimensions (h x w x d): 17.6 x 11.1 x 9.8 in
  • Weight: 26 lbs.
  • Shape: Multi-angle wedge
  • Material: 5/8" 11-ply Finland Birch
  • Finish: Textured White
  • Grill: 14 gauge powder coated perforated steel backed with acousticallytransparent reticulated foam
  • Connectors: 2x Neutric NL4 and barrier strip, wired in parallel
  • Suspension Points: 11x M10, 6x M8
  • Pole Mounts: One
  • Handle: One
  • U-Bracket: UB2108(W)
Wall Mount Bracket for CBR and DBR Series Speakers
Yamaha BWS251-400 Wall Mount Bracket for CBR and DBR Series Speakers
Yamaha's BWS251-400 is a wall mount bracket designed for Yamaha's CBR and DBR series speakers.Compatible Yamaha Speakers: CBR15 CBR12 CBR10 DBR15 DBR12 DBR10 IF2208 IF2205 MSR400 MSR250 MSR100 C112VA ...
Ceiling Bracket
Yamaha BCS251 Ceiling Bracket
Model: BCS251Net weight: 2.3kg; 5.1lbs / Load capability: 30kg; 66.2lbsApplicable for: CBR15, CBR12, CBR10, DBR15, DBR12, DBR10, MSR100, MSR400, MSR250, C112VA, IF2208, IF2108, IF2205
U-Brackets for the IF2108 Speaker, White
Yamaha UB2108W U-Brackets for the IF2108 Speaker, White
Wall mount U-Brackets for the Yamaha IF2108 speaker. They have a durable white finish which can be painted to match any interior. 

Usually ships in 7-14 business days.
Need it sooner? Call us!

Yamaha IF2108W
Speaker 2way 8" Full Range Passive White

OUR PART #  IF2108W

Product Information:

Yamaha Installation Series Loudspeakers

The Installation Series provides a wide range of models with seamlessly integrated hardware to meet the expectations of contractors and end-users for audio quality, ease of installation, and system design. All models feature a phase differential of less than 90 at 2 kHz . This minimizes the reduction of sound level and unwanted coloration in the "overlapped" area when combining/arraying speakers. The overall effect on frequency response is held to a minimum, ensuring a consistent family sound of speakers.

Selected Features:

  • Ideal for medium to large-scale installations.
  • Uniform phase response throughout the entire series.
  • A wide selection of dispersion characteristics for long-range, shortrange, and long/short range use.
  • Standard U-bracket and array-frame hardware available for maximuminstallation convenience and efficiency.
  • Switchable single-amp and bi-amp drive modes.
  • Certified measurement and prediction EASE data. Including polar plots, CADfiles, and DXF data.
  • Constructed of high strength premium 11-ply / 5/8 inch-thick Finland Birchenclosures on most models.
  • Grilles have 63% transparency for better clarity of sound.
  • Speakers include a barrier-strip and NL4 Neutrik* with parallelconnections.
  • Horns are manufactured from fiber-reinforced plastic to minimize unwantedresonance.
  • The entire line of speakers incorporates rotatable horns, when spaceconsideration dictates the speakers orientation.
  • High frequency drivers feature one-piece titanium diaphragms formedtoprecision tolerances for high performance, endurance and superiorsonicquality.

Specifications:

  • Frequency Response: 75 Hz – 18 kHz
  • Frequency Range: 55 Hz – 19 kHz
  • Nominal Coverage (H xV. -6dB): 90 deg. X 60 deg
  • Power Rating: 100 W (EIA)
  • Nominal Impedance: 8 ohms
  • Sensitivity (1 W @ 1 m): 95 dB SPL
  • Calculated Peak SPL: 121 dB SPL
  • Calculated Continuous SPL: 115 dB SPL
  • LF Component: 8" Woofer, 2" Voice Coil
  • HF Component: Rotatable Constant Directivity Horn, 1" exit, 1.7" VoiceCoil Compression Driver
  • Dimensions (h x w x d): 17.6 x 11.1 x 9.8 in
  • Weight: 26 lbs.
  • Shape: Multi-angle wedge
  • Material: 5/8" 11-ply Finland Birch
  • Finish: Textured White
  • Grill: 14 gauge powder coated perforated steel backed with acousticallytransparent reticulated foam
  • Connectors: 2x Neutric NL4 and barrier strip, wired in parallel
  • Suspension Points: 11x M10, 6x M8
  • Pole Mounts: One
  • Handle: One
  • U-Bracket: UB2108(W)
Wall Mount Bracket for CBR and DBR Series Speakers
Yamaha BWS251-400 Wall Mount Bracket for CBR and DBR Series Speakers
Yamaha's BWS251-400 is a wall mount bracket designed for Yamaha's CBR and DBR series speakers.Compatible Yamaha Speakers: CBR15 CBR12 CBR10 DBR15 DBR12 DBR10 IF2208 IF2205 MSR400 MSR250 MSR100 C112VA ...
Ceiling Bracket
Yamaha BCS251 Ceiling Bracket
Model: BCS251Net weight: 2.3kg; 5.1lbs / Load capability: 30kg; 66.2lbsApplicable for: CBR15, CBR12, CBR10, DBR15, DBR12, DBR10, MSR100, MSR400, MSR250, C112VA, IF2208, IF2108, IF2205
U-Brackets for the IF2108 Speaker, White
Yamaha UB2108W U-Brackets for the IF2108 Speaker, White
Wall mount U-Brackets for the Yamaha IF2108 speaker. They have a durable white finish which can be painted to match any interior. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM