Audio-Technica PRO 35
Cardioid Condenser Clip-on Instrument Microphone

OUR PART #  PRO35


Designed for sax, toms, brass and percussion, the Audio-Technica PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Audio-Technica PRO 35 Features:

  • UniMount® clip permits accurate positioning, provides shock resistance and protects element
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Extended frequency response captures subtle nuances of the performance
  • 6 ft (1.8 m) cable permanently attached between microphone and power module

Audio-Technica PRO 35 Specifications:

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 50-15,000 Hz
  • Low Frequency Roll-off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Max. Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (typical): 115 dB, 1 kHz at Max SPL
  • S/N Ratio: 64 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 2 mA typical
  • Switch: Flat, roll-off
  • Weight (Microphone): 0.3 oz (8 g)
  • Weight (Power Module): 2.9 oz (81 g)
  • Dimensions (Microphone): 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter
  • Dimensions (Power Module): 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter
  • Output Connector (Power Module): Integral 3-pin XLRM-type
  • Cable: 6 Feet (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
  • Accessories Furnished: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch
  • Audio-Technica Case Style: M12
Custom Stand Adapter for AT853 and AT853W
Audio-Technica AT8438 Custom Stand Adapter for AT853 and AT853W
Custom mount allows using miniature hanging and lavalier microphones in surface-mount applications. Fits 5/8"-27 thread stands. Adapter for the AT853 and AT853W microphones.
Two-Stage Windscreen, Black
Audio-Technica AT8153 Two-Stage Windscreen, Black
Fits Audio-Technica Case Styles: M2, M12, M34
Metal Windscreen
Audio-Technica AT8160 Metal Windscreen
 Metal windscreen with internal pop protection (black). Fits Audio-Technica Case Style(s): M2, M12, M22, M23, M34

Usually ships in 7-14 business days.
Need it sooner? Call us!
Replacement instrument mount and windscreen

Usually ships in 7-14 business days.
Need it sooner? Call us!
Replacement Steel Hanger

Usually ships in 7-14 business days.
Need it sooner? Call us!

Audio-Technica PRO 35
Cardioid Condenser Clip-on Instrument Microphone

OUR PART #  PRO35

Product Information:

Designed for sax, toms, brass and percussion, the Audio-Technica PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Audio-Technica PRO 35 Features:

  • UniMount® clip permits accurate positioning, provides shock resistance and protects element
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Extended frequency response captures subtle nuances of the performance
  • 6 ft (1.8 m) cable permanently attached between microphone and power module

Audio-Technica PRO 35 Specifications:

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 50-15,000 Hz
  • Low Frequency Roll-off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Max. Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (typical): 115 dB, 1 kHz at Max SPL
  • S/N Ratio: 64 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 2 mA typical
  • Switch: Flat, roll-off
  • Weight (Microphone): 0.3 oz (8 g)
  • Weight (Power Module): 2.9 oz (81 g)
  • Dimensions (Microphone): 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter
  • Dimensions (Power Module): 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter
  • Output Connector (Power Module): Integral 3-pin XLRM-type
  • Cable: 6 Feet (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
  • Accessories Furnished: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch
  • Audio-Technica Case Style: M12
Custom Stand Adapter for AT853 and AT853W
Audio-Technica AT8438 Custom Stand Adapter for AT853 and AT853W
Custom mount allows using miniature hanging and lavalier microphones in surface-mount applications. Fits 5/8"-27 thread stands. Adapter for the AT853 and AT853W microphones.
Two-Stage Windscreen, Black
Audio-Technica AT8153 Two-Stage Windscreen, Black
Fits Audio-Technica Case Styles: M2, M12, M34
Metal Windscreen
Audio-Technica AT8160 Metal Windscreen
 Metal windscreen with internal pop protection (black). Fits Audio-Technica Case Style(s): M2, M12, M22, M23, M34

Usually ships in 7-14 business days.
Need it sooner? Call us!
Replacement instrument mount and windscreen

Usually ships in 7-14 business days.
Need it sooner? Call us!
Replacement Steel Hanger

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM