Audix SCX25A-PS
Piano Miking System with Matched Pair of SCX25A Condenser Microphones

OUR PART #  SCX25A-PS


The Audix SCX25A-PS is a piano miking system that includes a matched pair of Audix's SCX25A condenser microphones.

The SCX25A is a professional studio condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shockmounted within an intricate machined brass ring, the SCX25A capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open-air sound with exceptional detail and realism.

With a smooth uniform frequency response from 20 Hz - 20 kHz, the SCX25A is very consistent when responding to on and off-axis signals, exhibiting excellent phase coherence and minimal proximity effect. The SCX25A is characterized with a wide cardioid polar pattern which enables the sound engineer the opportunity to blend the sound of the instrument or vocal with the sound of the room. Other features include a one-inch (25 mm) gold vapor capsule, miniaturized electronics and an extremely small footprint. The SCX25A will handle SPL in excess of 135 dB and will provide up to 20 dB of ambient noise rejection.

In addition to vocals, the SCX25A is ideally suited to capture acoustic instruments such as piano, guitar, vibes, woodwinds, brass, percussion toys, drum overheads, orchestra and symphony sectionals.

The SCX25A features a precision machined brass body, innovative capsule suspension system, steel mesh grille, black multi-layer class ‘A’ liquid finish, laser etched model and serial number, Switchcraft® or Audix XLR connector and heavy duty nylon clip.

Audix SCX25A-PS Includes:

  • Two (2) SCX25A condenser microphones in a matched pair
  • Two (2) DFLEX microphone clips
  • Two (2) CBL-20 20 ft microphone cables
  • One (1) Aluminum Road Case

Audix SCX25A-PS Features:

  • Isolated capsule suspension system
  • Low noise electronics
  • Extremely small footprint - brass body only 4 inches long

Audix SCX25A-PS Specifications:

  • Transducer Type:  Condenser
  • Frequency Response:  20 Hz - 20 kHz
  • Polar Pattern:  Cardioid
  • Output Impedance:  200 Ohms
  • Sensitivity at 1 kHz:  28 mV / Pa
  • Equivalent Noise Level:  14 dB (A weighted)
  • Signal to Noise Ratio:  80 dB
  • Maximum SPL:  >/= 135 dB
  • Dynamic Range:  121 dB
  • Power Requirements:  48-52 volts phantom
  • Connector:  Switchcraft® or Audix male
  • XLR Connector:  Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Housing:  Machined Brass
  • Finish:  Multi-layer Class ‘A’ liquid
  • Weight:  8.6 oz (244 g)
  • Length:  5.8" (148 mm)

Audix SCX25A-PS
Piano Miking System with Matched Pair of SCX25A Condenser Microphones

OUR PART #  SCX25A-PS

Product Information:

The Audix SCX25A-PS is a piano miking system that includes a matched pair of Audix's SCX25A condenser microphones.

The SCX25A is a professional studio condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shockmounted within an intricate machined brass ring, the SCX25A capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open-air sound with exceptional detail and realism.

With a smooth uniform frequency response from 20 Hz - 20 kHz, the SCX25A is very consistent when responding to on and off-axis signals, exhibiting excellent phase coherence and minimal proximity effect. The SCX25A is characterized with a wide cardioid polar pattern which enables the sound engineer the opportunity to blend the sound of the instrument or vocal with the sound of the room. Other features include a one-inch (25 mm) gold vapor capsule, miniaturized electronics and an extremely small footprint. The SCX25A will handle SPL in excess of 135 dB and will provide up to 20 dB of ambient noise rejection.

In addition to vocals, the SCX25A is ideally suited to capture acoustic instruments such as piano, guitar, vibes, woodwinds, brass, percussion toys, drum overheads, orchestra and symphony sectionals.

The SCX25A features a precision machined brass body, innovative capsule suspension system, steel mesh grille, black multi-layer class ‘A’ liquid finish, laser etched model and serial number, Switchcraft® or Audix XLR connector and heavy duty nylon clip.

Audix SCX25A-PS Includes:

  • Two (2) SCX25A condenser microphones in a matched pair
  • Two (2) DFLEX microphone clips
  • Two (2) CBL-20 20 ft microphone cables
  • One (1) Aluminum Road Case

Audix SCX25A-PS Features:

  • Isolated capsule suspension system
  • Low noise electronics
  • Extremely small footprint - brass body only 4 inches long

Audix SCX25A-PS Specifications:

  • Transducer Type:  Condenser
  • Frequency Response:  20 Hz - 20 kHz
  • Polar Pattern:  Cardioid
  • Output Impedance:  200 Ohms
  • Sensitivity at 1 kHz:  28 mV / Pa
  • Equivalent Noise Level:  14 dB (A weighted)
  • Signal to Noise Ratio:  80 dB
  • Maximum SPL:  >/= 135 dB
  • Dynamic Range:  121 dB
  • Power Requirements:  48-52 volts phantom
  • Connector:  Switchcraft® or Audix male
  • XLR Connector:  Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Housing:  Machined Brass
  • Finish:  Multi-layer Class ‘A’ liquid
  • Weight:  8.6 oz (244 g)
  • Length:  5.8" (148 mm)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM