Doug Fleenor Designs DMX6REL30A
6-Channel DMX512 Line Voltage Controlled Relay Pack with 2x 18" Pigtails

OUR PART #  DMX6REL30A


Doug Fleenor Design makes a series of relay packs that are controlled by DMX512.  This 6-channel unit, designed to switch line voltage loads up to 15 amps, uses 30 amp relays.  Line voltage input is on two 18" 12/3 SJ pigtails (one for CH 1-3, one for CH 4-6) fitted with a 15 amp parallel blade plug (20 amp connector optional).  Switched line outputs are on chassis mounted 15 amp parallel blade receptacles.

Doug Fleenor Designs DMX6REL30A Relay Pack Specifications:

  • Input signal: 250 Kilobaud, 0.2 volts minimum, 12volts maximum.
  • Input circuit: EIA-485 receiver with two 100 ohmPTC self resetting fuses, four low capacitance transient suppression diodes.
  • Input connector: Gold-plated 5-pin male (Neutrik D-1series).
  • Input pass through: Gold-plated 5-pin female (NeutrikD-1 series). All five pins are passed through.
  • Power input: 120 - 240 volts, 50/60 hertz, 2watts (plus load).
  • Power input plug: NEMA type 5-15P dead front plugstandard, others optional.
  • Power output: Input power is switched to output.
  • Power output socket: Nylon NEMA type 5-15R receptacle
  • Output rating: 15 amps per output. Maximum total loadis limited by input rating.
  • Output device: Aromat JTN.
  • Mechanical life: 10,000,000 operations minimum.
  • Electrical life: 300,000 operations minimum at 5 Amps.
    125,000 operations minimum at 20 Amps.
  • Color: Top, bottom and sides: Silver hammer tone.
  • Front and back: Black.
  • Dimensions: 6.5" D x 1.7" H x 16" W
  • Weight: 5 lbs (optional 19" rack adapter soldseparately)
  • Warranty: Five years on defects in manufacturing. Output device isnot covered.

Doug Fleenor Designs DMX6REL30A
6-Channel DMX512 Line Voltage Controlled Relay Pack with 2x 18" Pigtails

OUR PART #  DMX6REL30A

Product Information:

Doug Fleenor Design makes a series of relay packs that are controlled by DMX512.  This 6-channel unit, designed to switch line voltage loads up to 15 amps, uses 30 amp relays.  Line voltage input is on two 18" 12/3 SJ pigtails (one for CH 1-3, one for CH 4-6) fitted with a 15 amp parallel blade plug (20 amp connector optional).  Switched line outputs are on chassis mounted 15 amp parallel blade receptacles.

Doug Fleenor Designs DMX6REL30A Relay Pack Specifications:

  • Input signal: 250 Kilobaud, 0.2 volts minimum, 12volts maximum.
  • Input circuit: EIA-485 receiver with two 100 ohmPTC self resetting fuses, four low capacitance transient suppression diodes.
  • Input connector: Gold-plated 5-pin male (Neutrik D-1series).
  • Input pass through: Gold-plated 5-pin female (NeutrikD-1 series). All five pins are passed through.
  • Power input: 120 - 240 volts, 50/60 hertz, 2watts (plus load).
  • Power input plug: NEMA type 5-15P dead front plugstandard, others optional.
  • Power output: Input power is switched to output.
  • Power output socket: Nylon NEMA type 5-15R receptacle
  • Output rating: 15 amps per output. Maximum total loadis limited by input rating.
  • Output device: Aromat JTN.
  • Mechanical life: 10,000,000 operations minimum.
  • Electrical life: 300,000 operations minimum at 5 Amps.
    125,000 operations minimum at 20 Amps.
  • Color: Top, bottom and sides: Silver hammer tone.
  • Front and back: Black.
  • Dimensions: 6.5" D x 1.7" H x 16" W
  • Weight: 5 lbs (optional 19" rack adapter soldseparately)
  • Warranty: Five years on defects in manufacturing. Output device isnot covered.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM