Neutrik NC3MX-CC
3-Pole Male XLR Cable Connector, RF-Protected, Gold Contacts

OUR PART #  NC3MX-CC


The XCC XLR cable connector Series  with circumferential shield contact provides excellent RF-protection to transmit digital audio signals most efficient and reliable. This XLR features a coaxial ground spring and a coaxial hex crimp ferrule at the cable entrance for proper and reliable transition of the shield to the shell.

3 pole male cable connector, RF-protected, gold contacts

Cable O.D.: 5.4 - 6.2 mm
Crimp Size Shield: 6.5 mm (hex)

Features:

  • 3 pole cable connector with a circumferential shield contact for best EMI protection
  • XCCR coding ring to indicate digital AES signals included
  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses

Electrical Specifications:

  • Capacitance between contacts: = 4 pF
  • Contact resistance: = 3 m ohm
  • Dielectric strength: 1,5 kVdc
  • Insulation resistance: > 2 G ohm (initial)
  • Insulation resistance: > 1 G ohm (after damp heat test)
  • Rated current per contact: 16 A
  • Rated voltage: 50 V
  • Shielding effectiveness: > 55 dB @ 1.3 GHz

Mechanical Specifications:

  • Cable O.D.: 5.4 - 6.2 mm
  • Crimp size: 6,47 Hex crimp (shield) acc. IEC 60803 (die designation E)
  • Insertion force: = 20 N
  • Withdrawal force: = 20 N
  • Lifetime: > 1000 mating cycles
  • Wire size: max. 2.5 mm²
  • Wire size: max. 14 AWG
  • Wiring: Solder contacts
  • Locking device: latch lock
  • Crimp tool: "6.5 mm Hex die (size "

Material Specificaitons:

  • Boot: E" acc. To IEC 60803)"
  • Bushing: Polyuretan
  • Cap / Nut / Washer: Polyamide (PA6 15% GR)
  • Contact plating: PA 6 15% GR
  • Contacts: 0.2 µm Au hard alloy over 2 µm Ni
  • Contacts: Brass (CuZn39Pb3)
  • Insert: CuZn39Pb3, Ni plated
  • Locking element: Polyamide (PA 6.6 30 % GR)
  • Gasket: St3K32 (latch) / Ck 67 (spring)
  • Shell: Zinc diecast (ZnAl4Cu1)
  • Split sleeve: Nickel
  • Color coding: Polyacetal (POM)
  • Circumferential ground spring: CuSn6, Ni plated

Environmental Specifications:

  • Flammability: UL
  • Standard comppliance: UL 94 HB
  • Savety requirements: IP 40
  • Temperature range: Complies with IEC 68-2-20 °C
  • Optical Fiber type: Manufacturing Standard IEC 61076-2-103

Neutrik NC3MX-CC
3-Pole Male XLR Cable Connector, RF-Protected, Gold Contacts

OUR PART #  NC3MX-CC

Product Information:

The XCC XLR cable connector Series  with circumferential shield contact provides excellent RF-protection to transmit digital audio signals most efficient and reliable. This XLR features a coaxial ground spring and a coaxial hex crimp ferrule at the cable entrance for proper and reliable transition of the shield to the shell.

3 pole male cable connector, RF-protected, gold contacts

Cable O.D.: 5.4 - 6.2 mm
Crimp Size Shield: 6.5 mm (hex)

Features:

  • 3 pole cable connector with a circumferential shield contact for best EMI protection
  • XCCR coding ring to indicate digital AES signals included
  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses

Electrical Specifications:

  • Capacitance between contacts: = 4 pF
  • Contact resistance: = 3 m ohm
  • Dielectric strength: 1,5 kVdc
  • Insulation resistance: > 2 G ohm (initial)
  • Insulation resistance: > 1 G ohm (after damp heat test)
  • Rated current per contact: 16 A
  • Rated voltage: 50 V
  • Shielding effectiveness: > 55 dB @ 1.3 GHz

Mechanical Specifications:

  • Cable O.D.: 5.4 - 6.2 mm
  • Crimp size: 6,47 Hex crimp (shield) acc. IEC 60803 (die designation E)
  • Insertion force: = 20 N
  • Withdrawal force: = 20 N
  • Lifetime: > 1000 mating cycles
  • Wire size: max. 2.5 mm²
  • Wire size: max. 14 AWG
  • Wiring: Solder contacts
  • Locking device: latch lock
  • Crimp tool: "6.5 mm Hex die (size "

Material Specificaitons:

  • Boot: E" acc. To IEC 60803)"
  • Bushing: Polyuretan
  • Cap / Nut / Washer: Polyamide (PA6 15% GR)
  • Contact plating: PA 6 15% GR
  • Contacts: 0.2 µm Au hard alloy over 2 µm Ni
  • Contacts: Brass (CuZn39Pb3)
  • Insert: CuZn39Pb3, Ni plated
  • Locking element: Polyamide (PA 6.6 30 % GR)
  • Gasket: St3K32 (latch) / Ck 67 (spring)
  • Shell: Zinc diecast (ZnAl4Cu1)
  • Split sleeve: Nickel
  • Color coding: Polyacetal (POM)
  • Circumferential ground spring: CuSn6, Ni plated

Environmental Specifications:

  • Flammability: UL
  • Standard comppliance: UL 94 HB
  • Savety requirements: IP 40
  • Temperature range: Complies with IEC 68-2-20 °C
  • Optical Fiber type: Manufacturing Standard IEC 61076-2-103
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM