Goldline CBM1
Omnidirectional Boundary Condenser Microphone

OUR PART #  CBM1


Goldline's CBM1 microphone is a boundary type microphone that allows excellent pickup even from a distance.

Typical studio microphones are designed to operate in close proximity to a sound source. When the sound source is not in close proximity the studio microphone receives both the direct sound plus the delayed reflected sound out of phase. Response anomalies are caused by the out of sync direct and reflected sound received by the microphone. Gold Line boundary microphones solve this problem by receiving signals from both direct and reflected paths at the same time, and in phase.

The CBM1 places a small transducer at the boundary zone where direct and reflected waves act as a single reinforced signal. In this configuration, both direct and reflected sound occur very close together in time which means that the response over the microphone diaphragm is immune to changes in either amplitude or phase. This guarantees that no pressure build-up due to strong reflections can occur on axis. The high degree of directionality inherent to the typical studio microphone can be replaced by the CBM1 boundary microphone which picks up sound in a fashion that resembles the human ear.

Boundary microphones offer several distinct advantages over standard studio designs. They provide flat frequency microphone response without equalization and they maintain a more consistent sound quality as the sound source moves along the surface of its hemispherical pickup pattern. This technology also yields a more predictable sound field without interfering reflections, maintaining clarity of pickup even at a distance. Since clarity is maintained, even at a distance, the sound is more natural than would be the case if the recording had been made with conventional dynamic microphones. When preserving the ambiance of either a studio or concert hall, boundary microphones are ideal.

Additional Benefits of Boundary Microphones
Size, pickup pattern, unvarying response to changing sound sources are some of the benefits of CBM microphone technology. The CBM1 housing allows these microphones to be easily placed on table tops, under pianos, on the floor, or on lecterns. They can also be suspended out of the line of vision or placed below it.

Freedom of Movement
By making use of boundary microphones, performers, instrumentalists or vocalists have greater freedom of movement. They are not confined to a limited microphone range, and only extreme changes in distance will markedly effect sound quality.

Distortion Free at High SPLs
The Gold Line CBM1 boundary microphone is designed to be virtually immune to distortion at very high SPL levels (150dB SPL). Even the loudest and most dynamic instruments such as kick drums and pianos can be faithfully captured by the CBM1 and a single CBM1 can also be used to reproduce the sounds of several grouped instruments such as percussion and brass sections.

Features:

  • Flat frequency response without equalization
  • Better ambient pickup
  • Greater clarity at a distance

Specifications:

  • Microphone: Built-in omnidirectional electret condenser.
  • Output:
    - XLR 3 pin plug. Balancedcircuit.
    - Pin 1 - Ground, Pin 2 - Hot, Pin 3 - Neutral.
  • Output Impedance: 600 ohms
  • Frequency Response: 20Hz - 20kHz
  • Dynamic Range: 28dB - 121dB.
  • Filters: Flat- normal response, Boost- +6dB, Cut- -6dB
  • Power Requirements:
    - Battery: 9Valkaline.
    - Phantom: 12Vdc to 48Vdc
  • Dimensions: 2.5" W x 1.625" H x 4.75" D
  • Weight: 8 oz.
  • Case Material: Painted Aluminum

Click to download

Goldline CBM1
Omnidirectional Boundary Condenser Microphone

OUR PART #  CBM1

Product Information:

Goldline's CBM1 microphone is a boundary type microphone that allows excellent pickup even from a distance.

Typical studio microphones are designed to operate in close proximity to a sound source. When the sound source is not in close proximity the studio microphone receives both the direct sound plus the delayed reflected sound out of phase. Response anomalies are caused by the out of sync direct and reflected sound received by the microphone. Gold Line boundary microphones solve this problem by receiving signals from both direct and reflected paths at the same time, and in phase.

The CBM1 places a small transducer at the boundary zone where direct and reflected waves act as a single reinforced signal. In this configuration, both direct and reflected sound occur very close together in time which means that the response over the microphone diaphragm is immune to changes in either amplitude or phase. This guarantees that no pressure build-up due to strong reflections can occur on axis. The high degree of directionality inherent to the typical studio microphone can be replaced by the CBM1 boundary microphone which picks up sound in a fashion that resembles the human ear.

Boundary microphones offer several distinct advantages over standard studio designs. They provide flat frequency microphone response without equalization and they maintain a more consistent sound quality as the sound source moves along the surface of its hemispherical pickup pattern. This technology also yields a more predictable sound field without interfering reflections, maintaining clarity of pickup even at a distance. Since clarity is maintained, even at a distance, the sound is more natural than would be the case if the recording had been made with conventional dynamic microphones. When preserving the ambiance of either a studio or concert hall, boundary microphones are ideal.

Additional Benefits of Boundary Microphones
Size, pickup pattern, unvarying response to changing sound sources are some of the benefits of CBM microphone technology. The CBM1 housing allows these microphones to be easily placed on table tops, under pianos, on the floor, or on lecterns. They can also be suspended out of the line of vision or placed below it.

Freedom of Movement
By making use of boundary microphones, performers, instrumentalists or vocalists have greater freedom of movement. They are not confined to a limited microphone range, and only extreme changes in distance will markedly effect sound quality.

Distortion Free at High SPLs
The Gold Line CBM1 boundary microphone is designed to be virtually immune to distortion at very high SPL levels (150dB SPL). Even the loudest and most dynamic instruments such as kick drums and pianos can be faithfully captured by the CBM1 and a single CBM1 can also be used to reproduce the sounds of several grouped instruments such as percussion and brass sections.

Features:

  • Flat frequency response without equalization
  • Better ambient pickup
  • Greater clarity at a distance

Specifications:

  • Microphone: Built-in omnidirectional electret condenser.
  • Output:
    - XLR 3 pin plug. Balancedcircuit.
    - Pin 1 - Ground, Pin 2 - Hot, Pin 3 - Neutral.
  • Output Impedance: 600 ohms
  • Frequency Response: 20Hz - 20kHz
  • Dynamic Range: 28dB - 121dB.
  • Filters: Flat- normal response, Boost- +6dB, Cut- -6dB
  • Power Requirements:
    - Battery: 9Valkaline.
    - Phantom: 12Vdc to 48Vdc
  • Dimensions: 2.5" W x 1.625" H x 4.75" D
  • Weight: 8 oz.
  • Case Material: Painted Aluminum

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM