Bogen Communications WV150
Mixer/Amp, Wall-Mount, 8 Module Bays, 150 Watts

OUR PART #  WV150


Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range of power from which to choose from, with three models ranging from 100W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems.

Each model includes eight module bays for plug-in input modules and allows for up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level.

Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

Bogen Communications WV150 Features:

  • 100-, 150-, and 250-watt models, each with a large power reserve
  • Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
  • 8 module bays
  • Wide selection of advanced plug-in modules
  • 2 module bays capable of handling signal processing plug-in output modules
  • 4 levels of priority between modules
  • 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
  • Adjustable output level limiter with limit indicator
  • Tape output available on front of unit
  • Optional front-mounted input combo jack with 1/4" stereo phone and female XLR capabilities
  • Motorized master volume control can be remotely operated
  • Bass and treble controls with center detent
  • Two-color LED for each channel indicates input active/clipping
  • Switch permits user to select either transformer-coupled or a direct low-impedance output
  • Bass and treble control bypass switch (located in module bay 6)
  • 125 Hz Lo-cut feature (switch located in module bay 6)
  • 5-position barrier strip, with clamping washers, provides connections for speaker loads
  • Master mute function overrides all audio from the mixer section of the amplifier
  • Screw terminal for master mute and remote volume control functions
  • Each of the 8 module bays has an associated independent volume control
  • Remote volume control panel (RVCP) (sold separately)
  • Requires flush-mount (Model BBF) or surface-mount (Model BBS) back boxes (sold separately)
  • Requires front cover door (WMAD sold separately)
  • UL and CSA listed

Bogen Communications WV150 Specifications:

  • Power Output (RMS): 150W (200W typical, @ 1kHz/0.1%/4 ohms)
  • Frequency Response:
    • Transformer: 45Hz-20kHz; 0/-2dB @ FRP
    • Direct:20Hz-20kHz; 0/-1dB @ FRP
  • Distortion:
    • Transformer: 0.5% THD+N, Maximum, Full-rated bandwidth @FRP
    • Direct: 0.1% THD+N, Maximum, Full-rated bandwidth @ FRP
  • Signal-to-Noise:
    • Fundamental: -94dB
    • With Aux Module: -70dB
    • WithMic Module: -60dB
    • With Tel Module: -70dB
  • Tone Controls:
    • Bass Frequency: 100Hz (+/-10dB minimum)
    • TrebleFrequency: 10kHz (+/-10dB minimum)
    • Low Cut Frequency: 125Hz @ -6dB/octave
  • Sensitivity: 0.4V (at backplane connector)
  • Output Regulation: 2dB or better no load to full load
  • Output Impedance:
    • Transformer-Coupled: 70V, 25V, 8 ohms; balanced or unbalanced
    • Direct Coupled: 4 ohms unbalanced
  • Tape Out:
    • Output Level: 4VRMS @ FRP
    • Output Impedance: 50 ohms maximum
  • Overload Protection: Electronic overload protection (auto reset)
  • Thermal Protection: Thermistor attached to heat sink
  • Line Fusing: Resettable circuit breaker
  • Cooling: Thermally controlled 3-speed fan
  • Power Consumption: 3.5A @ 120V AC, 60 Hz
  • Dimensions: (W x H): 14 1/8" x 21"
  • Weight: 29 lbs
Door For Bogen WV-Series Amps
Bogen Communications Wmad Door For Bogen WV-Series Amps
Lockable front access panel prevents tampering with system settings Lock and 2 keys included Dimensions (W x H x D): 16 1/4" x 26 3/4" x 1"

Usually ships in 7-14 business days.
Need it sooner? Call us!
Back Box For Flush Mounting
Bogen Communications Bbf Back Box For Flush Mounting
This unit is a flush-mount back box, for mounting between studs.Specifications: Dimensions: 14 1/2" W x 24 3/4" H x 3 7/8" D

Usually ships in 7-14 business days.
Need it sooner? Call us!
Transformer-Balanced Microphone Input Module with Screw Terminals
Bogen Communications MIC1S Transformer-Balanced Microphone Input Module with Screw Terminals
Bogen's MIC1S is a transformer-balanced, low-impedance microphone input module.Bogen Communications MIC1S Features:Gain/Trim control Bass & Treble controls Noise gate with Threshold & Duration control Limiter with Threshold ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
XLR Balanced Mic Input Module
Bogen Communications MIC1X XLR Balanced Mic Input Module
The MIC1X is a transformer-balanced, low-impedance microphone input module.Microphone Input Module (MIC1X): The MIC1X module has a transformer-isolated, balanced input with XLR connector. It interfaces with low-impedance dynamic ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Generator Module, 4-Tone
Bogen Communications TNG1S Generator Module, 4-Tone
The Bogen Communications TNG1S is a multiple tone generator input module. Bogen Communications TNG1S Features:Select 4 of 8 tones to triggerBurst/steady, slow whoop, siren, mechanical bell, Klaxon, night ringer, double chime, ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Loop-Start/Ground-Start Trunk/Paging Interface, Screw Terminal
Bogen Communications TEL1S Loop-Start/Ground-Start Trunk/Paging Interface, Screw Terminal
Telephone interface input module. Bogen Communication's Telephone Input Module (TEL1S) has a transformer-isolated, balanced input and configuration jumpers that allow it to interface with both wet and dry loop telephone systems. In the dry ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mic Input Module, screw terminals
Bogen Communications MIC2S Mic Input Module, screw terminals
Electronic-balanced, low-impedance microphone input module.Bogen Communications MIC2S Features:Gain/Trim controlHi-Cut/Lo-Cut controlsVoice Enhancement controlNoise gate w/Threshold controlLimiter w/Threshold control24V Phantom powerMute ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mic Input Module, XLR
Bogen Communications MIC2X Mic Input Module, XLR
Electronic-balanced, low-impedance microphone input module.Bogen Communications MIC2X Features:Gain/Trim controlHi-Cut/Lo-Cut controlsVoice Enhancement controlNoise gate w/Threshold controlLimiter w/Threshold control24V Phantom powerMute ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Unbalanced Stereo Input Module, RCA
Bogen Communications SAX1R Unbalanced Stereo Input Module, RCA
Unbalanced stereo input module.Stereo Aux Input Module (SAX1R): The SAX1R module is a stereo, high-impedance, unbalanced input module. It has two RCA jacks for its input connectors, and a gain/trim control that allows the gain to be ...

Please call for availability.
Input Module Stereo Balance
Bogen Communications BAL2S Input Module Stereo Balance
Input Modules for use with M300/450/600 and V35/V60/V150/V250 Model Amplifiers.Balanced Input Module (BAL2S): The BAL2S input module is a stereo, high-impedance, electronically balanced input module. It's mutable by higher priority modules ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Unbalanced mono/aux Input Module, RCA
Bogen Communications MAX1R Unbalanced mono/aux Input Module, RCA
The Bogen Communications MAX1R is an unbalanced mono input module. Bogen Communications MAX1R Features:Gain/Trim controlBass & Treble controlsGate feature mutes lower priority modulesMute send & receiveVariable ducking level ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Remote Volume Control Panel
Bogen Communications RVCP Remote Volume Control Panel
Remote Volume Control Panel for Power Vector and Wall-Mount Power Vector Amps.Minimum 24-gauge, 3 conductor wire is recommended. Maximum wire length run of 2,000 feet.  Multiple RVCP’s can be daisy-chained from control panel to ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Bogen Communications WV150
Mixer/Amp, Wall-Mount, 8 Module Bays, 150 Watts

OUR PART #  WV150

Product Information:

Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range of power from which to choose from, with three models ranging from 100W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems.

Each model includes eight module bays for plug-in input modules and allows for up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level.

Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

Bogen Communications WV150 Features:

  • 100-, 150-, and 250-watt models, each with a large power reserve
  • Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
  • 8 module bays
  • Wide selection of advanced plug-in modules
  • 2 module bays capable of handling signal processing plug-in output modules
  • 4 levels of priority between modules
  • 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
  • Adjustable output level limiter with limit indicator
  • Tape output available on front of unit
  • Optional front-mounted input combo jack with 1/4" stereo phone and female XLR capabilities
  • Motorized master volume control can be remotely operated
  • Bass and treble controls with center detent
  • Two-color LED for each channel indicates input active/clipping
  • Switch permits user to select either transformer-coupled or a direct low-impedance output
  • Bass and treble control bypass switch (located in module bay 6)
  • 125 Hz Lo-cut feature (switch located in module bay 6)
  • 5-position barrier strip, with clamping washers, provides connections for speaker loads
  • Master mute function overrides all audio from the mixer section of the amplifier
  • Screw terminal for master mute and remote volume control functions
  • Each of the 8 module bays has an associated independent volume control
  • Remote volume control panel (RVCP) (sold separately)
  • Requires flush-mount (Model BBF) or surface-mount (Model BBS) back boxes (sold separately)
  • Requires front cover door (WMAD sold separately)
  • UL and CSA listed

Bogen Communications WV150 Specifications:

  • Power Output (RMS): 150W (200W typical, @ 1kHz/0.1%/4 ohms)
  • Frequency Response:
    • Transformer: 45Hz-20kHz; 0/-2dB @ FRP
    • Direct:20Hz-20kHz; 0/-1dB @ FRP
  • Distortion:
    • Transformer: 0.5% THD+N, Maximum, Full-rated bandwidth @FRP
    • Direct: 0.1% THD+N, Maximum, Full-rated bandwidth @ FRP
  • Signal-to-Noise:
    • Fundamental: -94dB
    • With Aux Module: -70dB
    • WithMic Module: -60dB
    • With Tel Module: -70dB
  • Tone Controls:
    • Bass Frequency: 100Hz (+/-10dB minimum)
    • TrebleFrequency: 10kHz (+/-10dB minimum)
    • Low Cut Frequency: 125Hz @ -6dB/octave
  • Sensitivity: 0.4V (at backplane connector)
  • Output Regulation: 2dB or better no load to full load
  • Output Impedance:
    • Transformer-Coupled: 70V, 25V, 8 ohms; balanced or unbalanced
    • Direct Coupled: 4 ohms unbalanced
  • Tape Out:
    • Output Level: 4VRMS @ FRP
    • Output Impedance: 50 ohms maximum
  • Overload Protection: Electronic overload protection (auto reset)
  • Thermal Protection: Thermistor attached to heat sink
  • Line Fusing: Resettable circuit breaker
  • Cooling: Thermally controlled 3-speed fan
  • Power Consumption: 3.5A @ 120V AC, 60 Hz
  • Dimensions: (W x H): 14 1/8" x 21"
  • Weight: 29 lbs
Door For Bogen WV-Series Amps
Bogen Communications Wmad Door For Bogen WV-Series Amps
Lockable front access panel prevents tampering with system settings Lock and 2 keys included Dimensions (W x H x D): 16 1/4" x 26 3/4" x 1"

Usually ships in 7-14 business days.
Need it sooner? Call us!
Back Box For Flush Mounting
Bogen Communications Bbf Back Box For Flush Mounting
This unit is a flush-mount back box, for mounting between studs.Specifications: Dimensions: 14 1/2" W x 24 3/4" H x 3 7/8" D

Usually ships in 7-14 business days.
Need it sooner? Call us!
Transformer-Balanced Microphone Input Module with Screw Terminals
Bogen Communications MIC1S Transformer-Balanced Microphone Input Module with Screw Terminals
Bogen's MIC1S is a transformer-balanced, low-impedance microphone input module.Bogen Communications MIC1S Features:Gain/Trim control Bass & Treble controls Noise gate with Threshold & Duration control Limiter with Threshold ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
XLR Balanced Mic Input Module
Bogen Communications MIC1X XLR Balanced Mic Input Module
The MIC1X is a transformer-balanced, low-impedance microphone input module.Microphone Input Module (MIC1X): The MIC1X module has a transformer-isolated, balanced input with XLR connector. It interfaces with low-impedance dynamic ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Generator Module, 4-Tone
Bogen Communications TNG1S Generator Module, 4-Tone
The Bogen Communications TNG1S is a multiple tone generator input module. Bogen Communications TNG1S Features:Select 4 of 8 tones to triggerBurst/steady, slow whoop, siren, mechanical bell, Klaxon, night ringer, double chime, ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Loop-Start/Ground-Start Trunk/Paging Interface, Screw Terminal
Bogen Communications TEL1S Loop-Start/Ground-Start Trunk/Paging Interface, Screw Terminal
Telephone interface input module. Bogen Communication's Telephone Input Module (TEL1S) has a transformer-isolated, balanced input and configuration jumpers that allow it to interface with both wet and dry loop telephone systems. In the dry ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mic Input Module, screw terminals
Bogen Communications MIC2S Mic Input Module, screw terminals
Electronic-balanced, low-impedance microphone input module.Bogen Communications MIC2S Features:Gain/Trim controlHi-Cut/Lo-Cut controlsVoice Enhancement controlNoise gate w/Threshold controlLimiter w/Threshold control24V Phantom powerMute ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mic Input Module, XLR
Bogen Communications MIC2X Mic Input Module, XLR
Electronic-balanced, low-impedance microphone input module.Bogen Communications MIC2X Features:Gain/Trim controlHi-Cut/Lo-Cut controlsVoice Enhancement controlNoise gate w/Threshold controlLimiter w/Threshold control24V Phantom powerMute ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Unbalanced Stereo Input Module, RCA
Bogen Communications SAX1R Unbalanced Stereo Input Module, RCA
Unbalanced stereo input module.Stereo Aux Input Module (SAX1R): The SAX1R module is a stereo, high-impedance, unbalanced input module. It has two RCA jacks for its input connectors, and a gain/trim control that allows the gain to be ...

Please call for availability.
Input Module Stereo Balance
Bogen Communications BAL2S Input Module Stereo Balance
Input Modules for use with M300/450/600 and V35/V60/V150/V250 Model Amplifiers.Balanced Input Module (BAL2S): The BAL2S input module is a stereo, high-impedance, electronically balanced input module. It's mutable by higher priority modules ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Unbalanced mono/aux Input Module, RCA
Bogen Communications MAX1R Unbalanced mono/aux Input Module, RCA
The Bogen Communications MAX1R is an unbalanced mono input module. Bogen Communications MAX1R Features:Gain/Trim controlBass & Treble controlsGate feature mutes lower priority modulesMute send & receiveVariable ducking level ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Remote Volume Control Panel
Bogen Communications RVCP Remote Volume Control Panel
Remote Volume Control Panel for Power Vector and Wall-Mount Power Vector Amps.Minimum 24-gauge, 3 conductor wire is recommended. Maximum wire length run of 2,000 feet.  Multiple RVCP’s can be daisy-chained from control panel to ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM