Sanken HAD-48
Mic Preamp for Dynamic Mic

OUR PART #  HAD-48

Log In for price!

Don't have an account? Apply today!

Because dynamic microphones have lower output levels than condenser microphones, long cable lengths often result in a noticeably noisy signal. Sanken’s innovative HAD-48 solves this dilemma by increasing the microphone level considerably without degrading the signal. Providing a choice of switchable 20dB or 40 dB of gain, this greatly improves the signal-to-noise ratio. Additionally, increased noise due to added gain in the microphone preamp can be reduced.

The HAD-48 features an XLR-M XLR-F tube only 105.3mm long and runs off 48V phantom power from the mixer input (no batteries needed!) and draws only 3mA.

Features:

  • Provides needed gain for dynamic microphones
  • Provides gain boost for long cable lengths
  • Selectable Gain: +20dB or +40dB
  • Powered by mixer phantom 48 volts
  • No batteries required
  • Small and portable, attractive packaging
  • Does not allow phantom power to reach the microphone

Specifications:

  • Gain: +29dB or +40dB switchable
  • Nominal input level: 1.0mV(-60dBV)
  • Nominal output level: 0.1V(-20dBV); Select +20dB position for high impedence output dynamic mic and +40dB position for low impedence output mic.
  • Frequency res: 50Hz~20kHz
  • Consumption current: less than 4.5mA
  • Noise level: -121 dBA
  • Max Input Level: 0.48V(-6.4dBV)(+20dB position)
  • (THD 1%): 47.7mV(-26dBV)(+40dB position)
  • Max Output level: 4.8V(13.6dBV)(THD1%)
  • Input impedence: 10k Ohms (1kHz)
  • Output impedence: 180 Ohms (1kHz)
  • Expected receive side impedence: more than 10k Ohms
  • Powering: 48V phantom fed from mixer or micpre side
  • Input connector: XLR-3F
  • Output connector: XLR-3M
  • Dimensions: 115.3mm(L), 19mm(depth)
  • Weight: 90g

Se

Click to download

Sanken HAD-48
Mic Preamp for Dynamic Mic

OUR PART #  HAD-48

Product Information:

Because dynamic microphones have lower output levels than condenser microphones, long cable lengths often result in a noticeably noisy signal. Sanken’s innovative HAD-48 solves this dilemma by increasing the microphone level considerably without degrading the signal. Providing a choice of switchable 20dB or 40 dB of gain, this greatly improves the signal-to-noise ratio. Additionally, increased noise due to added gain in the microphone preamp can be reduced.

The HAD-48 features an XLR-M XLR-F tube only 105.3mm long and runs off 48V phantom power from the mixer input (no batteries needed!) and draws only 3mA.

Features:

  • Provides needed gain for dynamic microphones
  • Provides gain boost for long cable lengths
  • Selectable Gain: +20dB or +40dB
  • Powered by mixer phantom 48 volts
  • No batteries required
  • Small and portable, attractive packaging
  • Does not allow phantom power to reach the microphone

Specifications:

  • Gain: +29dB or +40dB switchable
  • Nominal input level: 1.0mV(-60dBV)
  • Nominal output level: 0.1V(-20dBV); Select +20dB position for high impedence output dynamic mic and +40dB position for low impedence output mic.
  • Frequency res: 50Hz~20kHz
  • Consumption current: less than 4.5mA
  • Noise level: -121 dBA
  • Max Input Level: 0.48V(-6.4dBV)(+20dB position)
  • (THD 1%): 47.7mV(-26dBV)(+40dB position)
  • Max Output level: 4.8V(13.6dBV)(THD1%)
  • Input impedence: 10k Ohms (1kHz)
  • Output impedence: 180 Ohms (1kHz)
  • Expected receive side impedence: more than 10k Ohms
  • Powering: 48V phantom fed from mixer or micpre side
  • Input connector: XLR-3F
  • Output connector: XLR-3M
  • Dimensions: 115.3mm(L), 19mm(depth)
  • Weight: 90g

Se

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM