ART Tube MP Project Series
Tube Microphone Preamp

OUR PART #  TUBE-MP-PROJECT

Log In for price!

Don't have an account? Apply today!

ART's Tube MP Project Series is a professional quality audio interface that lets you connect microphone, instrument, and line level signals to a mixer or other audio input. This hybrid design is the latest in a long line of ART tube preamps. ART took the legendary Tube MP series and updated every aspect of the design, inside and out, while still maintaining a compact, reliable, and cost effective product. From the new all-aluminum stackable chassis to the precision LED level metering circuitry, ART has improved virtually every aspect of their already successful Tube MP series. With up to 70dB of clean musical gain and high output signal drive capability the cold digital world will melt with your mixes.

ART Tube MP Project Series Features:

  • Extremely Low Noise Discrete Front End
  • Up to 70dB of Clean, “Musical” Gain
  • High Output Signal Drive Capability
  • Fast FET Limiter to Prevent Overload
  • Switch Selectable Input Impedance
  • Precision LED Metering
  • Built-in Low Noise Phantom Power Supply
  • Compact, Stackable all Aluminum Chassis
  • XLR and 1/4” Inputs and Outputs
  • Phase Invert Switch
  • High Cut Filter Switch
  • Variable Input and Output Controls

ART Tube MP Project Series Specifications:

  • Frequency Response: 10Hz – 40KHz, +/-1 dB (typical)
  • Dynamic Range: >100dB (20Hz to 20KHz)
  • THD: <0.05% (typical)
  • CMRR: >60dB (typical)
  • EIN: <-130dB (XLR to XLR A-weighted)
  • Maximum Input Level: +17dBu (1/4”), +16dBu (XLR)
  • Maximum Output Level: +20dBu (1/4”), +26dBu (XLR)
  • Input Connections: 1/4” TRS unbalanced (1meg Ohm)
  • XLR female balanced
  • Output Connection: 1/4” TRS unbalanced (600 Ohm)
  • XLR male balanced, (<300 Ohm)
  • Maximum Gain: 70dB (XLR - XLR), +50dB (1/4”- XLR)
  • Input Gain Pad: Switchable, 20dB
  • XLR Input Impedance: Switchable, 4.7k Ohms / 600 Ohms
  • Low Cut Filter: Switchable, -3dB @ 40Hz
  • Output Phase: Switchable, Normal/Invert
  • Output Limiter Type: Switchable, Fast & Musical FET limiter, >20dBlimit range
  • Phantom Power: Switchable, +48V DC, filtered, current limited
  • Signal Metering: Precise LED array with a fast attack and moderate release
  • Tube Type: 12AX7A hand selected
  • Chassis Type: Aluminum Anodized with integral/stackable rubber sides
  • Power Requirements: 10Volts AC @ 700mA (typical)
  • Dimensions: 1.75” H x 5.9” W x 6.5” D (44.5mm x 150mm x 165mm)
  • Weight: 2.5 lbs. (1.14 kg)

ART Tube MP Project Series
Tube Microphone Preamp

OUR PART #  TUBE-MP-PROJECT

Product Information:

ART's Tube MP Project Series is a professional quality audio interface that lets you connect microphone, instrument, and line level signals to a mixer or other audio input. This hybrid design is the latest in a long line of ART tube preamps. ART took the legendary Tube MP series and updated every aspect of the design, inside and out, while still maintaining a compact, reliable, and cost effective product. From the new all-aluminum stackable chassis to the precision LED level metering circuitry, ART has improved virtually every aspect of their already successful Tube MP series. With up to 70dB of clean musical gain and high output signal drive capability the cold digital world will melt with your mixes.

ART Tube MP Project Series Features:

  • Extremely Low Noise Discrete Front End
  • Up to 70dB of Clean, “Musical” Gain
  • High Output Signal Drive Capability
  • Fast FET Limiter to Prevent Overload
  • Switch Selectable Input Impedance
  • Precision LED Metering
  • Built-in Low Noise Phantom Power Supply
  • Compact, Stackable all Aluminum Chassis
  • XLR and 1/4” Inputs and Outputs
  • Phase Invert Switch
  • High Cut Filter Switch
  • Variable Input and Output Controls

ART Tube MP Project Series Specifications:

  • Frequency Response: 10Hz – 40KHz, +/-1 dB (typical)
  • Dynamic Range: >100dB (20Hz to 20KHz)
  • THD: <0.05% (typical)
  • CMRR: >60dB (typical)
  • EIN: <-130dB (XLR to XLR A-weighted)
  • Maximum Input Level: +17dBu (1/4”), +16dBu (XLR)
  • Maximum Output Level: +20dBu (1/4”), +26dBu (XLR)
  • Input Connections: 1/4” TRS unbalanced (1meg Ohm)
  • XLR female balanced
  • Output Connection: 1/4” TRS unbalanced (600 Ohm)
  • XLR male balanced, (<300 Ohm)
  • Maximum Gain: 70dB (XLR - XLR), +50dB (1/4”- XLR)
  • Input Gain Pad: Switchable, 20dB
  • XLR Input Impedance: Switchable, 4.7k Ohms / 600 Ohms
  • Low Cut Filter: Switchable, -3dB @ 40Hz
  • Output Phase: Switchable, Normal/Invert
  • Output Limiter Type: Switchable, Fast & Musical FET limiter, >20dBlimit range
  • Phantom Power: Switchable, +48V DC, filtered, current limited
  • Signal Metering: Precise LED array with a fast attack and moderate release
  • Tube Type: 12AX7A hand selected
  • Chassis Type: Aluminum Anodized with integral/stackable rubber sides
  • Power Requirements: 10Volts AC @ 700mA (typical)
  • Dimensions: 1.75” H x 5.9” W x 6.5” D (44.5mm x 150mm x 165mm)
  • Weight: 2.5 lbs. (1.14 kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.