Community RMG-200A
Voice Range Horn System with Swivel Yoke Bracket

OUR PART #  RMG200A


The Community RMG-200A is a complete horn/driver system designed for use in standalone voice-range sound reinforcement and announcement/signaling applications. The RMG-200A provides focused, high-output sound projection, with predictable performance and exceptional long-term durability. The horn portion of the assembly is a handcrafted one-piece waveguide, precision molded in hand-laminated, fiber-reinforced fiberglass for optimum performance. With substantial fiberglass layering and integral throat and driver flange construction, the horn is built to withstand substantial torque loads. The inherent strength and rigidity of the fiberglass construction enhances sonic efficiency by preventing sound energy loss, as well as providing inherently weatherproof fabrication.

The compression driver is a high-output, high-sensitivity loudspeaker that is configured with the diaphragm facing forward, isolating the voice coil and magnetic structure from the environment. The one-piece, non-metallic diaphragm/suspension offers exceptional resistance to the effects of humidity, dust, and corrosive atmospheres. The large area, low-compression phase plug loading and large magnet structure exhibits extremely low distortion at high outputs while maintaining high efficiency and low-power compression. A fiberglass rear cover protects the driver from the effects of weather and corrosion.

A factory-installed weather-resistant steel swivel yoke bracket is included. There is a five-year warranty against manufacturing defects on all components of the system.

Community RMG-200A Voice Range Horn System Features:

  • 2" Throat Exit M200A Driver
  • Low Distortion, High Efficiency
  • High Power Output
  • Non-metallic Diaphragm
  • Swivel yoke bracket included
  • Highly Resistant to Harsh Environments, IP65 rating

Community RMG-200A Voice Range Horn System Specifications:

  • Loudspeaker Type: Voice-range horn system
  • Operating Range:
    • 400 Hz to 8 Khz
    • 500 Hz to 4 khz (±3.5 dB)
  • Max Input Ratings: 75W continuous, 120W program
  • Recommended Power Amplifier: 100W to 140W
  • Sensitivity (1W/1m): 115 dB SPL (400 Hz to 4 kHz 1/3 octave bands)
  • Maximum Output: 134 dB SPL / 141 dB SPL (peak)
  • Nominal Impedance: 11 Ohms
  • Minimum Impedance: 10.8 Ohms @ 1.8 kHz
  • Nominal –6dB Beamwidth:
    • 50°H (+14° / -9°, 2 kHz to 4 kHz)
    • 40°V (+10° / -10°, 2 kHz to 4 kHz)
  • Axial Q / DI: 35 / 15.4, 2 kHz to 4 kHz
  • Crossover Frequency: No internal crossover
  • Recommended Signal Processing: 400 Hz high pass filter 24dB / Oct.
  • Drivers: MF 1 x M200, Ferrofluid-cooled
  • Driver Protection: None
  • Input Connection: 16 gauge, 2 conductor, 12 foot (4 m) SJOW cable through gland nut
  • Controls: None
  • Enclosure: Fiberglass
  • Enclosure Hardware: None
  • Mounting/Rigging Provisions: (4) 1/4" holes at the corners of the horn mouth
  • Grille: None
  • Environmental Performance: IEC529 IP65W rating with a minimum 5-degree downward aiming angle
  • Required Accessories: 400 Hz high pass filter 24dB / Oct.
  • Supplied Accessories: Swivel yoke bracket
  • Optional Accessories: System controller
  • Dimensions: 9.75" H x 17.63" W (front) x 10.5" (rear) x 25" D (248 x 448 x 267 x 635 mm)
  • Weight (with bracket): 21 lbs (9.5 kg)
  • Shipping Weight: 27 lbs (12.2 kg)

NOTES:
1. Sensitivity:
Free field pink noise measurement at 40 ft (12.2 m) at 50% power; extrapolated to 1 meter and an input of 3.4 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal driver

Community RMG-200A
Voice Range Horn System with Swivel Yoke Bracket

OUR PART #  RMG200A

Product Information:

The Community RMG-200A is a complete horn/driver system designed for use in standalone voice-range sound reinforcement and announcement/signaling applications. The RMG-200A provides focused, high-output sound projection, with predictable performance and exceptional long-term durability. The horn portion of the assembly is a handcrafted one-piece waveguide, precision molded in hand-laminated, fiber-reinforced fiberglass for optimum performance. With substantial fiberglass layering and integral throat and driver flange construction, the horn is built to withstand substantial torque loads. The inherent strength and rigidity of the fiberglass construction enhances sonic efficiency by preventing sound energy loss, as well as providing inherently weatherproof fabrication.

The compression driver is a high-output, high-sensitivity loudspeaker that is configured with the diaphragm facing forward, isolating the voice coil and magnetic structure from the environment. The one-piece, non-metallic diaphragm/suspension offers exceptional resistance to the effects of humidity, dust, and corrosive atmospheres. The large area, low-compression phase plug loading and large magnet structure exhibits extremely low distortion at high outputs while maintaining high efficiency and low-power compression. A fiberglass rear cover protects the driver from the effects of weather and corrosion.

A factory-installed weather-resistant steel swivel yoke bracket is included. There is a five-year warranty against manufacturing defects on all components of the system.

Community RMG-200A Voice Range Horn System Features:

  • 2" Throat Exit M200A Driver
  • Low Distortion, High Efficiency
  • High Power Output
  • Non-metallic Diaphragm
  • Swivel yoke bracket included
  • Highly Resistant to Harsh Environments, IP65 rating

Community RMG-200A Voice Range Horn System Specifications:

  • Loudspeaker Type: Voice-range horn system
  • Operating Range:
    • 400 Hz to 8 Khz
    • 500 Hz to 4 khz (±3.5 dB)
  • Max Input Ratings: 75W continuous, 120W program
  • Recommended Power Amplifier: 100W to 140W
  • Sensitivity (1W/1m): 115 dB SPL (400 Hz to 4 kHz 1/3 octave bands)
  • Maximum Output: 134 dB SPL / 141 dB SPL (peak)
  • Nominal Impedance: 11 Ohms
  • Minimum Impedance: 10.8 Ohms @ 1.8 kHz
  • Nominal –6dB Beamwidth:
    • 50°H (+14° / -9°, 2 kHz to 4 kHz)
    • 40°V (+10° / -10°, 2 kHz to 4 kHz)
  • Axial Q / DI: 35 / 15.4, 2 kHz to 4 kHz
  • Crossover Frequency: No internal crossover
  • Recommended Signal Processing: 400 Hz high pass filter 24dB / Oct.
  • Drivers: MF 1 x M200, Ferrofluid-cooled
  • Driver Protection: None
  • Input Connection: 16 gauge, 2 conductor, 12 foot (4 m) SJOW cable through gland nut
  • Controls: None
  • Enclosure: Fiberglass
  • Enclosure Hardware: None
  • Mounting/Rigging Provisions: (4) 1/4" holes at the corners of the horn mouth
  • Grille: None
  • Environmental Performance: IEC529 IP65W rating with a minimum 5-degree downward aiming angle
  • Required Accessories: 400 Hz high pass filter 24dB / Oct.
  • Supplied Accessories: Swivel yoke bracket
  • Optional Accessories: System controller
  • Dimensions: 9.75" H x 17.63" W (front) x 10.5" (rear) x 25" D (248 x 448 x 267 x 635 mm)
  • Weight (with bracket): 21 lbs (9.5 kg)
  • Shipping Weight: 27 lbs (12.2 kg)

NOTES:
1. Sensitivity:
Free field pink noise measurement at 40 ft (12.2 m) at 50% power; extrapolated to 1 meter and an input of 3.4 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal driver

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM