Bogen Communications OPS1W
6" 100WOrbit Pendant Speaker in White

OUR PART #  OPS1W


The Orbit Pendant Speaker (OPS1) is the ideal choice for high ceiling and open space environments.  The OPS1 features NEAR's MLS™ and MDT™ technologies (see below), which improve sound quality and increase operating reliability.

The low-distortion speaker design, featuring NEAR's spiderless driver and one-piece metal-alloy cone structure, delivers superb articulation and the highest intelligibility for both music and speech.

Unique MDT™ (Metal Diaphragm Technology):

  • Solid,one-piece cone structure eliminates the traditional dustcap
  • Extremely stablecone structure over extended periods
  • Fast transmission ofsound through the diaphragm means low energy storage
  • Special hardanodizing process creates a ceramic surface for increasedstiffness
  • Super-efficientthermal path for cooling the voice coil (not paper orplastic)
  • High rigidity andlow mass versus typical paper or plastic cones

MLS™ (Magnetic Liquid Suspension):

  • Magneticliquid (Ferrofluid) injected into magnet gap
  • Constant lubricationof the gap prevents oxidation from occurring
  • Voice coil is mostefficiently cooled by fluid path rather than air
  • Lower distortion viastronger centering forces on voice coil
  • Increasedreliability, particularly in high power daily usesystems

Features:

  • Wide dispersion coaxial driver for broad, evencoverage
  • Stable, high definition metal-alloycone
  • MDT™ cone design delivers detailedsound
  • MLS™ eliminates conventional centering "spider" for moreaccurate voice coil centering
  • High-efficiency drivers deliver superiorperformance
  • Extremely good off-axis response
  • Computer-matched venting system for full bassoutput
  • High power handling capability for foregroundsound
  • Selectable power taps via front-mountedcontrol
  • 16-ohm input fornon-transformer multi-speaker systems
  • Easy wiring with snap-on connector
  • Connector provides loop-through to nextspeaker
  • Easy to use cable suspension system that includes threesuspension cables with attached forged eyebolts
  • Threaded brass insert point for optional safety cable eyebolt
  • Low-resonance cabinet structure
  • White textured finish easily painted to match themedecors
  • Attractive, contemporary, sturdy steel grille assembly with fineperforations

Specifications:

  • Frequency Response (-10 dB)*: 45 Hz to 19kHz
    *Free-Space Response, 16-ohm input
  • LF Driver: 6-1/2" MDT Metal-Alloy Cone(MLS Voice Coil Centering System)
  • HF Driver: 20mm (3/4") PolycarbonateDome
  • Sensitivity (1W/1 m): 89.5 dBspl (Average100 Hz - 10 kHz)
  • Dispersion: 140 degrees
  • Impedance Ratings: Low (16 ohms), High(70V/100V)
  • Power Input (Max.): 100W @ 16 ohms; 32W @70V/100V
  • Power Settings (in watts)†:
    70V: 32,16, 8, 4, 2, 1
    100V: 32, 16, 8, 4, 2
    † Front panel switch selected(under grille)
  • Enclosure Material: Fire-rated (94VO)ABS
  • Grille Material: Powder-Coated PerforatedMetal
  • Terminations: 4 Terminal Snap-Lock InputConnector
  • Product Weight :10 lbs.
  • Speaker Dimensions: 15" dia. x 9-1/4"D
  • Included Accessories: (3) SuspensionCables; (3) Forged Eye Bolts; (3) Nuts; (1) Quick-Snap Clip; (1) Snap-LockInput Connector

Bogen Communications OPS1W
6" 100WOrbit Pendant Speaker in White

OUR PART #  OPS1W

Product Information:

The Orbit Pendant Speaker (OPS1) is the ideal choice for high ceiling and open space environments.  The OPS1 features NEAR's MLS™ and MDT™ technologies (see below), which improve sound quality and increase operating reliability.

The low-distortion speaker design, featuring NEAR's spiderless driver and one-piece metal-alloy cone structure, delivers superb articulation and the highest intelligibility for both music and speech.

Unique MDT™ (Metal Diaphragm Technology):

  • Solid,one-piece cone structure eliminates the traditional dustcap
  • Extremely stablecone structure over extended periods
  • Fast transmission ofsound through the diaphragm means low energy storage
  • Special hardanodizing process creates a ceramic surface for increasedstiffness
  • Super-efficientthermal path for cooling the voice coil (not paper orplastic)
  • High rigidity andlow mass versus typical paper or plastic cones

MLS™ (Magnetic Liquid Suspension):

  • Magneticliquid (Ferrofluid) injected into magnet gap
  • Constant lubricationof the gap prevents oxidation from occurring
  • Voice coil is mostefficiently cooled by fluid path rather than air
  • Lower distortion viastronger centering forces on voice coil
  • Increasedreliability, particularly in high power daily usesystems

Features:

  • Wide dispersion coaxial driver for broad, evencoverage
  • Stable, high definition metal-alloycone
  • MDT™ cone design delivers detailedsound
  • MLS™ eliminates conventional centering "spider" for moreaccurate voice coil centering
  • High-efficiency drivers deliver superiorperformance
  • Extremely good off-axis response
  • Computer-matched venting system for full bassoutput
  • High power handling capability for foregroundsound
  • Selectable power taps via front-mountedcontrol
  • 16-ohm input fornon-transformer multi-speaker systems
  • Easy wiring with snap-on connector
  • Connector provides loop-through to nextspeaker
  • Easy to use cable suspension system that includes threesuspension cables with attached forged eyebolts
  • Threaded brass insert point for optional safety cable eyebolt
  • Low-resonance cabinet structure
  • White textured finish easily painted to match themedecors
  • Attractive, contemporary, sturdy steel grille assembly with fineperforations

Specifications:

  • Frequency Response (-10 dB)*: 45 Hz to 19kHz
    *Free-Space Response, 16-ohm input
  • LF Driver: 6-1/2" MDT Metal-Alloy Cone(MLS Voice Coil Centering System)
  • HF Driver: 20mm (3/4") PolycarbonateDome
  • Sensitivity (1W/1 m): 89.5 dBspl (Average100 Hz - 10 kHz)
  • Dispersion: 140 degrees
  • Impedance Ratings: Low (16 ohms), High(70V/100V)
  • Power Input (Max.): 100W @ 16 ohms; 32W @70V/100V
  • Power Settings (in watts)†:
    70V: 32,16, 8, 4, 2, 1
    100V: 32, 16, 8, 4, 2
    † Front panel switch selected(under grille)
  • Enclosure Material: Fire-rated (94VO)ABS
  • Grille Material: Powder-Coated PerforatedMetal
  • Terminations: 4 Terminal Snap-Lock InputConnector
  • Product Weight :10 lbs.
  • Speaker Dimensions: 15" dia. x 9-1/4"D
  • Included Accessories: (3) SuspensionCables; (3) Forged Eye Bolts; (3) Nuts; (1) Quick-Snap Clip; (1) Snap-LockInput Connector
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM